DOI QR코드

DOI QR Code

Study for Reducing Safety Distance by Installing Ammunition Storage Facility in Underground

탄약저장시설 지하화에 따른 안전거리 축소방안 연구

  • Received : 2020.02.26
  • Accepted : 2020.05.09
  • Published : 2020.06.20

Abstract

With increasing interest in an underground-type ammunition storage facility, several design results have been provided recently. However, since not only experts in the tunnel but also military persons in charge of ammunition have not fully understood the safety distance standard, reliable design results are not being produced. In this study, the effective design method of an underground-type ammunition storage facility was provided by analyzing the current safety distance standard. First, the critical safety distances that dominate the size of construction site for underground-type ammunition storage facilities were evaluated, which are the layout of chambers and the configuration of the entrances. Then, the decreasing effect of inter-chamber distance was studied according to the rock type and the storage density of ammunition. In addition, the method of designing tunnels with parallel lines and two-floors was considered for arranging more chambers while complying with the safety distance standards. In particular, numerical simulations were carried out to determine the satisfaction of the safety distance standards when an underground-type ammunition storage facility is composed of two-floor and the decreasing effect of inter-chamber distance according to the inner explosive pressure reduction. Finally, the method to adjust the size of entrances and the path of pressure were studied for decreasing the safety distance at the entrance.

지하형 탄약고에 대한 관심이 증가하면서, 관련된 설계 결과가 다수 도출되고 있다. 그러나 터널 민간 전문가들뿐만 아니라 탄약관련 군 실무자들도 안전거리 기준을 완벽하게 숙지하지 못하여 안전거리 기준을 모두 준수한 신뢰성 있는 설계 결과는 도출되고 있지 않고 있는 실정이다. 또한 안전거리를 과하게 적용하여 부지를 비효율적으로 활용하거나 시공불가판정을 받는 사례도 보고되고 있다. 본 연구에서는 지하형 탄약고에 대한 안전거리 기준을 정리하고 이를 준수하면서 효율적으로 설계할 수 있는 방안에 대해 연구하였다. 또한 여러 방법 중 안전거리를 획기적으로 저감시킬 수 있는 방법을 도출하여 향후 지하형 탄약고 설계 및 시공 시에 적용할 수 있도록 데이터를 마련하였다.

Keywords

References

  1. Ministry of National Defense. Instruction of safety control standard for ammunition and explosion. Korea, Seoul: Ministry of National Defense; 2019. 483 p.
  2. Department Of Defense. Manual of DOD ammunition and explosives safety standards. USA, VA.: Department of Defense Explosive Safety Board; 2017. 63 p.
  3. AASTP NATO. Manual of NATO safety principles for the storage of military ammunition and explosives. Ammunition Safety Group, NATO. 2010. 588 p.
  4. Ministry of Land, Infrastructure and Transport. Tunnel standard specification. Korea, Seoul: Korean Tunnelling and Underground Space Association; 2015. 126 p.
  5. Lysmer J, Wass G. Shear waves in plane infinite surface. Journal of the Engineering Mechanics Division. 1972;98(1):351-8.