참고문헌
- A.F. Rowcliffe, L.K. Mansur, D.T. Hoelzer, R.K. Nanstad, Perspectives on radiation effects in nickel-base alloys for applications in advanced reactors, J. Nucl. Mater. 392 (2009) 341-352, https://doi.org/10.1016/j.jnucmat.2009.03.023.
- M.I. Solonin, A.B. Alekseev, Y.I. Kazennov, V.F. Khramtsov, V.P. Kondra'ev, T.A. Krasina, V.N. Rechitsky, V.N. Stepankov, S.N. Votinov, XHM-1 alloy as a promising structural material for water-cooled fusion reactor components, J. Nucl. Mater. 233-237 (1996) 586-591, https://doi.org/10.1016/S0022-3115(96)00297-8.
- A.M. Savchenko, M.V. Leontieva-Smirnova, G.V. Kulakov, V.N. Rechitsky, Y.V. Konovalov, A.A. Nikitina, Peculiarities of stainless steels application as ATF in VVER'S, in: TopFuel-2018 Conf., Prague, Czech Repuublic, September 30 - October 04, 2018 (n.d).
- K. Kurakin, S. Kushmanov, Neutron physics calculation for VVER-1000 absorber element lifetime determination, in: 19 AER Symp. VVER React. Phys. React. Saf., Varna, Bulgaria, September 21-25, 2009, (n.d).
- A.V. Vatulin, V.P. Kondrat'Ev, V.N. Rechitskii, M.I. Solonin, Corrosion and radiation resistance of "bochvaloy" nickel-chromium alloy, Met. Sci. Heat Treat. 46 (2004) 469-473, https://doi.org/10.1007/s11041-005-0004-8.
- M.I. Solonin, A.B. Alekseev, S.A. Averin, Y.A. Burenkov, V.M. Chernov, B.K. Kardashev, V.P. Kondrat'ev, A.V. Kozlov, V.N. Rechitsky, S.N. Votinov, Cr-Ni alloys for fusion reactors, J. Nucl. Mater. (1998) 1762-1766, https://doi.org/10.1016/S0022-3115(98)00406-1, 258-263.
- A.A. Sheldyakov, V.Y. Shishin, V.V. Yakovlev, G.V. Kulakov, Y.V. Konovalov, Effect of irradiation on physical and mechanical properties and structure of chromium-nickel alloy 42ХНМ, in: 11th Conf. React. Mater. Sci., Dimitrovgrad, Russia, May 27-31, 2019 (n.d).
- L. Zheng, G. Schmitz, Y. Meng, R. Chellali, R. Schlesiger, Mechanism of intermediate temperature embrittlement of ni and ni-based superalloys, Crit. Rev. Solid State Mater. Sci. 37 (2012) 181-214, https://doi.org/10.1080/10408436.2011.613492.
- B. Du, L. Sheng, Z. Hu, C. Cui, J. Yang, X. Sun, Investigation on the microstructure and tensile behavior of a Ni-based IN792 superalloy, Adv. Mech. Eng. 10 (2018) 1-8, https://doi.org/10.1177/1687814017752167.
- C.L. White, J.H. Schneibel, R.A. Padgett, High temperature embrittlement of NI and Ni-Cr alloys by trace elements, Metall. Trans. A. 14 (1983) 595-610, https://doi.org/10.1007/bf02643776.
- L. Jiang, X. Ye, C. Cui, H. Huang, B. Leng, Z. Li, X. Zhou, Intermediate temperature embrittlement of one new Ni-26W-6Cr based superalloy for molten salt reactors, Mater. Sci. Eng. A 668 (2016) 137-145, https://doi.org/10.1016/j.msea.2016.04.032.
- W. Yang, M. Xu, Y. Meng, L. Zheng, X. Meng, Verification of interpretation of dynamic strain aging for intermediate temperature embrittlement in Ni-Bi alloy, J. Iron Steel Res. Int. 22 (2015) 602-606, https://doi.org/10.1016/S1006-706X(15)30046-7.
- M.A. Stopher, The effects of neutron radiation on nickel-based alloys, Mater. Sci. Technol. 33 (2017) 518-536, https://doi.org/10.1080/02670836.2016.1187334.
- J.T. Ward, J.K. Witter, T.M. Angeliu, Assessing the effects of radiation damage on Ni-base alloys for the prometheus space reactor system, J. Nucl. Mater. 366 (2007) 223-237, https://doi.org/10.1016/j.jnucmat.2007.01.217.
- H. Chen, Y. Hai, R. Liu, L. Jiang, X. xi Ye, J. Li, W. Xue, W. Wang, M. Tang, L. Yan, W. Yin, X. Zhou, The irradiation hardening of Ni-Mo-Cr and Ni-W-Cr alloy under Xe26+ ion irradiation, Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms 421 (2018) 50-58, https://doi.org/10.1016/j.nimb.2018.02.018.
- S. Holmstrom, et al., Test methodologies for determining high temperature material properties of thin walled tubes, Joint Res. Cent. (2017) 1-33, https://doi.org/10.2760/702821. JRC105586, n.d.
- J. Yoon, J. Kim, H. Kim, C. Won, Y. Song, S.H. Park, Calibration of hoop stress in ring tensile test with Zircaloy-4 tube, J. Mech. Sci. Technol. 31 (2017) 4183-4188, https://doi.org/10.1007/s12206-017-0815-8.
- F. Nagase, T. Sugiyama, T. Fuketa, Optimized ring tensile test method and hydrogen effect on mechanical properties of zircaloy cladding in hoop direction, J. Nucl. Sci. Technol. 46 (2009) 545-552, https://doi.org/10.1080/18811248.2007.9711560.
- M. Kiraly, D.M. Antok, L. Horvath, Z. Hozer, Evaluation of axial and tangential ultimate tensile strength of zirconium cladding tubes, Nucl. Eng. Technol. 50 (2018) 425-431, https://doi.org/10.1016/j.net.2018.01.002.
- F. Nindiyasari, P. Pierick, D. Boomstra, A. Pandit, Ring tensile test of reference zircaloy cladding tube as a proof of principle for hotcell setup, in: TopFuel-2018 Conf., Prague, Czech Repuublic, September 30 - October 04, 2018 (n.d).
- J. Desquines, D.A. Koss, A.T. Motta, B. Cazalis, M. Petit, The issue of stress state during mechanical tests to assess cladding performance during a reactivity-initiated accident (RIA), J. Nucl. Mater. 412 (2011) 250-267, https://doi.org/10.1016/j.jnucmat.2011.03.015.
- M.A. Martin-Rengel, F.J. Gomez Sanchez, J. Ruiz-Hervias, L. Caballero, A. Valiente, Revisiting the method to obtain the mechanical properties of hydrided fuel cladding in the hoop direction, J. Nucl. Mater. 429 (2012) 276-283, https://doi.org/10.1016/j.jnucmat.2012.06.003.
- M.A.M. Rengel, F.J.G. Sanchez, J.R. Hervias, L.C. Molano, Determination of the hoop fracture properties of unirradiated hydrogen-charged nuclear fuel cladding from ring compression tests, J. Nucl. Mater. 436 (2013) 123-129. http://oa.upm.es/29083/. https://doi.org/10.1016/j.jnucmat.2013.01.311
- V. Busser, M.C. Baietto-Dubourg, J. Desquines, C. Duriez, J.P. Mardon, Mechanical response of oxidized Zircaloy-4 cladding material submitted to a ring compression test, J. Nucl. Mater. 384 (2009) 87-95, https://doi.org/10.1016/j.jnucmat.2008.10.027.
- E. Eidelpes, L.F. Ibarra, R.A. Medina, Ring compression tests on un-irradiated nuclear fuel rod cladding considering fuel pellet support, J. Nucl. Mater. 510 (2018) 446-459, https://doi.org/10.1016/j.jnucmat.2018.08.009.
- F.J. Gomez, M.A. Martin Rengel, J. Ruiz-Hervias, M.A. Puerta, Study of the hoop fracture behaviour of nuclear fuel cladding from ring compression tests by means of non-linear optimization techniques, J. Nucl. Mater. 489 (2017) 150-157, https://doi.org/10.1016/j.jnucmat.2017.03.043.
- H. Jiang, J.A.J. Wang, Methodology for Mechanical Property Testing of Fuel Cladding Using an Expanding Plug Wedge Test, 2014, https://doi.org/10.1016/j.jnucmat.2013.11.026.
- M. Le Saux, C. Poussard, X. Averty, C. Sainte Catherine, S. Carassou, J. Besson, High temperature expansion due to compression test for the determination of a cladding material failure criterion under RIA loading conditions, in: Int. Top. Meet. Light Water React. Fuel Perform., San Francisco, USA, September 30 - October 3, 2007 (n.d).
- K.F. Nilsson, M. Negyesi, Z. Szaraz, I. Simonovski, An evaluation of the segmented expanding cone-mandrel test to assess hydride re-orientation and ductility reduction for Zircaloy-2 cladding tubes, J. Nucl. Mater. 466 (2015) 220-233, https://doi.org/10.1016/j.jnucmat.2015.07.019.
- K.F. Nilsson, O. Martin, C. Chenel-Ramos, J. Mendes, The segmented expanding cone-mandrel test revisited as material characterization and component test for fuel claddings, Nucl. Eng. Des. 241 (2011) 445-458, https://doi.org/10.1016/j.nucengdes.2010.10.026.
- S. Holmstrom, et al., Determination of high temperature material properties of 15-15Ti steel by small specimen techniques, Joint Res. Cent. (2017) 1-111, https://doi.org/10.2760/49859. JRC105589, n.d.
- E.N. Campitelli, P. Spatig, J. Bertsch, C. Hellwig, Assessment of irradiation-hardening on Eurofer97' and Zircaloy 2 with punch tests and finite-element modeling, Mater. Sci. Eng. A 400-401 (2005) 386-392, https://doi.org/10.1016/j.msea.2005.02.088.
- L. Yegorova, et al., Description of Test Procedures and Analytical Methods, Database on the Behavior of High Burnup Fuel Rods with Zr1%Nb Cladding and UO2 Fuel (VVER Type) under Reactivity Accident Conditions, 2, U.S. Nuclear Regulatory Commission, 1999, pp. 6.16-6.19. NUREG/IA-0156, n.d.
- V.I. Razumovskiy, A.Y. Lozovoi, I.M. Razumovskii, First-principles-aided design of a new Ni-base superalloy: influence of transition metal alloying elements on grain boundary and bulk cohesion, Acta Mater. 82 (2015) 369-377, https://doi.org/10.1016/j.actamat.2014.08.047.
- K. Pettersson, et al., Nuclear Fuel Behaviour in Loss-Of-Coolant Accident (LOCA) Conditions, Nuclear Energy Agency, 2009, pp. 43-47. NEA-6846, n.d.
- G.V. Kulakov, et al., Main properties of the Ni-Cr alloy 42KHNM and the prospects of its implementation as a construction material of VVER elements, in: 11th Conf. React. Mater. Sci., Dimitrovgrad, Russia, May 27-31, 2019 (n.d).
- J. Blaber, B. Adair, A. Antoniou, Ncorr : open-source 2D digital image correlation Matlab software, Exp. Mech. 55 (2015) 1105-1122, https://doi.org/10.1007/s11340-015-0009-1.
- M.C. Billone, Assessment of Current Test Methods for Post- LOCA Cladding Behavior, Argonne National Laboratory, 2012, pp. 3-7. NUREG/CR-7139, n.d.
- S. Shrivastava, C. Ghosh, J.J. Jonas, A comparison of the von Mises and Hencky equivalent strains for use in simple shear experiments, Philos. Mag. A 92 (2012) 779-786, https://doi.org/10.1080/14786435.2011.634848.
- I. Faridmehr, M.H. Osman, A. Bin Adnan, A.F. Nejad, R. Hodjati, Correlation between engineering stress-strain and true stress-strain curve, Am. J.Civ. Eng. Architect. 2 (2014) 53-59, https://doi.org/10.12691/ajcea-2-1-6.
피인용 문헌
- Evaluation of the true-strength characteristics for isotropic materials using ring tensile test vol.53, pp.7, 2020, https://doi.org/10.1016/j.net.2021.01.033