DOI QR코드

DOI QR Code

부품단종에 대한 조사·분석 및 관리방안

DMSMS Management Survey and Analysis Method

  • 정현우 (국방기술품질원 부품개발연구팀) ;
  • 심보현 (국방기술품질원 표준화연구팀)
  • Jung, Hyun-Woo (Parts Development Research Team, Defense Agency for Technology and Quality) ;
  • Shim, Bo-Hyun (Standardization Research Team, Defense Agency for Technology and Quality)
  • 투고 : 2020.01.21
  • 심사 : 2020.05.08
  • 발행 : 2020.05.31

초록

무기체계를 구성하는 원자재 또는 부품이 수요에 따라 개발이 되어 생산되다가 기술의 발전 또는 시장 상황의 변화에 따라 노후화가 진행되어 생산이 중단되는 경우를 부품단종이라 한다. 현재 우리 군이 사용 중인 무기체계의 장비들은 부품단종으로 인해 조달, 정비, 운용 등에 어려움을 겪고 있다. 무기체계의 수명주기 기간 중 발생하는 부품단종 문제는 소요군 뿐만 아니라 장비, 부품, 원자재의 제조자 및 공급자에게 경제적인 손실과 무기체계 전투태세 준비에 영향을 미친다. 그러나 첨단기술의 발전으로 무기체계를 구성하는 전자부품의 수명은 점점 단축되고 있다. 또한 무기체계의 특성상 개발부터 폐기에 이르기까지 수십 년이 소요됨에 따라 부품단종이 발생하게 되고, 이는 무기체계 장비의 전투 준비태세와 수명주기 비용에 심각한 악영향을 미친다. 따라서 무기체계 장비의 개발에서부터 폐기까지의 총 수명주기에 부품단종을 체계적으로 관리하는 것이 필요하다. 본 연구에서는 선진국의 부품단종 관리 제도를 분석하여 국내 실정에 맞는 부품단종 관리방안을 제시하고, 나아가 부품단종 관리의 조기 정착을 위한 발전 방안을 제시하고자 한다.

Parts obsolescence is a component type, in which raw materials or parts that make up a weapons system, are developed and produced according to demand, but they age due to changes in technology or market conditions. The weapon system equipment currently being used by the military is having difficulty in procurement, maintenance, and operation because of the obsolescence of parts. Parts obsolescence during the life cycle of a weapons system affects not only the combat readiness of the military but also the economic loss of material, parts, and equipment manufacturers and suppliers. On the other hand, advanced technology has reduced the life span of electronic components that make up the weapons system. In addition, because of the nature of the weapons system, the obsolescence of components takes decades from development to disposal, which has a serious adverse effect on equipment readiness and life cycle costs. Therefore, it is necessary to manage systematically the parts obsolescence from development until the disposal of the weapons system equipment. This study examined the system of component control in developed countries to present a proper management plan for local situations and propose development plans for the early settlement of component control.

키워드

참고문헌

  1. S. C Choi, K. R. Lee, A Study on the Improvement of DMSMS Management for Weapon Systems, Korea Institute of Military Science and Technology, Vol. 10, No. 2 pp.134-141, June 2007.
  2. K. D Park, J. M. Rhee, A Study on DMSMS Management for Weapon systems, Journal of the Korea Academia-Industrial cooperation Society, Vol. 14, No. 11 pp.5866-5871, November 2013. DOI : http://dx.doi.org/10.5762/KAIS.2013.14.11.5866
  3. S. C. Choi, C. J. Lee, J. H. Kim, J. M. Lee, I. G. Jang, H. R. Lee, A Study on the Localization Promotion Policy Plan for the Early Discontinuance of Parts, Policy Research Report, Korea National Defense University, Republic of Korea. URL: http://www.prism.go.kr/
  4. SD-22, Diminishing Manufacturing Sources and Material Shortages(DMSMS) A Guidebook of Best Practices for Implementing a Robust DMSMS Management Program, p.206, Defense Standardization Program Office, January 2016. https://quicksearch.dla.mil/qsDocDetails.aspx?ident_number=275490
  5. SD-19, Parts Management Guide, p.44, Defense Standardization Program Office, December 2013. https://quicksearch.dla.mil/qsDocDetails.aspx?ident_number=119791
  6. S. W. Kim, S. R. Lee, H. C. Jin, J. I. Choi, J. B. Yoon, A Study on the Progress Plan of DMSMS Management, Research and investigation report, Defense Agency for Technology and Quality, Republic of Korea.