• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.538-543
• /
• 2020

Boric acid is used as a coolant for pressurized-water reactors, and the degree of burnup is controlled by the concentration of boric acid. Therefore, accurate measurement of the concentration of boric acid is an important factor in reactor safety. An improved system was proposed for the accurate determination of boron concentration. A new boron-concentration measurement technique, called multisensitive detection, was developed to improve the measurement accuracy of boron meters. In previous studies, laboratory-scale experiments were performed based on different sensitivity detectors, confirming a 65% better accuracy than conventional single-detector boron meters. Based on these experimental results, an experimental system simulating the coolant-circulation environment in the reactor was constructed; accuracy analysis of the boron meter with a multisensitivity detector was performed at the actual coolant pressure and temperature. In this study, the boron concentration conversion equation was derived from the calibration test, and the accuracy of the boron concentration conversion equation was examined through a repeatability test. Through the experiment, it was confirmed that the accuracy was up to 87.5% higher than the conventional single-detector boron meter.

• Mass Spectrometry Letters
• /
• 제12권1호
• /
• pp.26-30
• /
• 2021

The impurity concentration is a crucial parameter for semiconductor thin films. Evaluating the impurity distribution in silicon thin film is another challenge. In this study, we have investigated the doping concentration of boron in silicon thin film using time of flight secondary ion mass spectrometry in dynamic mode of operation. Boron doped silicon film was grown on i) p-type silicon wafer and ii) borosilicate glass using hot wire chemical vapor deposition technique for possible applications in optoelectronic devices. Using well-tuned SIMS measurement recipe, we have detected the boron counts 101~104 along with the silicon matrix element. The secondary ion beam sputtering area, sputtering duration and mass analyser analysing duration were used as key variables for the tuning of the recipe. The quantitative analysis of counts to concentration conversion was done following standard relative sensitivity factor. The concentration of boron in silicon was determined 1017~1021 atoms/㎤. The technique will be useful for evaluating distributions of various dopants (arsenic, phosphorous, bismuth etc.) in silicon thin film efficiently.

• 한국재료학회지
• /
• 제24권6호
• /
• pp.305-309
• /
• 2014

When sunlight irradiates a boron-doped p-type solar cell, the formation of BsO2i decreases the power-conversion efficiency in a phenomenon named light-induced degradation (LID). In this study, we used boron-doped p-type Cz-Si solar cells to monitor this degradation process in relation to irradiation wavelength, intensity and duration of the light source, and investigated the reliability of the LID effects, as well. When halogen light irradiated a substrate, the LID rate increased more rapidly than for irradiation with xenon light. For different intensities of halogen light (e.g., 1 SUN and 0.1 SUN), a lower-limit value of LID showed a similar trend in each case; however, the rate reached at the intensity of 0.1 SUN was three times slower than that at 1 SUN. Open-circuit voltage increased with increasing duration of irradiation because the defect-formation rate of LID was slow. Therefore, we suppose that sufficient time is needed to increase LID defects. After a recovery process to restore the initial value, the lower-limit open-circuit voltage exhibited during the re-degradation process showed a trend similar to that in the first degradation process. We suggest that the proportion of the LID in boron-doped p-type Cz-Si solar cells has high correlation with the normalized defect concentrations (NDC) of BsO2i. This can be calculated using the extracted minority-carrier diffusion-length with internal quantum efficiency (IQE) analysis.

• 대한전자공학회논문지
• /
• 제18권3호
• /
• pp.42-51
• /
• 1981

결정방위 (100)인 단결정 P형 실리콘 기판으로 N+PP+ 태양전지를 제작하였다. 뒷면의 P+층의 형성은 940℃에서 60분간 boron nitride를 사용하는 첫번째 boron predeposition과 boron glass를 제거하지 않고 1145℃에서 3시간 동안 행하는 두번째 predeposition으로 이루어지며 boron 확산층의 어닐링은 1100℃에서 40분간 하였다. 앞면의 N+ 층의 형성은 900℃에서 7∼15분동안 POCI3 source를 사용하는 Phosphorus Predeposition으로 이루어지며 어닐링은 800℃에서 1시간 동안 dryO2분위기로 하였다 금속전극층의 형성은 Ti, Pd, Ag의 순으로 앞, 뒷면에 이들 금속들을 질공증착한 후 사진식각을 함으로써 이루어지며 이에 다시 전기도금을 하여 전체 전극층의 두께를 3∼4μm정도로 증가시켰다. 표면 광반사를 줄이기 위해 앞면에 400℃에서 silicon nitride를 입혔으며 마지막으로 550℃에서 10분간 alloy를 함으로써 금속전극의 신뢰도를 높혔다. 그 결과 제작된 면적 3.36㎠의 N+PP+ 전지들은 100mW/㎠의 인공조명하에서 단락전류 103mA, 개방전압 0.59V ,충실도 0.8을 보였다. 따라서 실제 전면적(수광면적)효율이 14.4%(16.2%)가 되어 BSF가 없는 N+P 전지의 11%전면적 변환효율에서 약3.5%의 효율이 개선되었다.

• Nuclear Engineering and Technology
• /
• 제8권1호
• /
• pp.29-40
• /
• 1976

시리콘 태양전지의 한쪽 면내에서 광에 의해서 발생된 전하운반체의 수집을 하는데 있어서 부가적인 도움을 줄 수 있는 정전적인 부등전계 효과에 고나한 연구가 수행되었다. 주석(tin) 주입에서 오는 격자변형의 보상효과로 말미암아 P형 측내에 보론농도의 구배를 가져오므로서 부동전계를 발생시킬 수 있었다. 태양전지내에 p-n 접합을 gtud성시키기 위하여 주로 방사증식확산의 원리에 근거를 둔 새로운 이온주입법이 채택되었다. 이온주입으로 된 태양전지의 회로개방전압과 변환효율을 각각 0.44V 및 5%였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.297-297
• /
• 2010

Precise control of the position and density of doping elements at the nanoscale is becoming a central issue for realizing state-of-the-art silicon-based optoelectronic devices. As dimensions are scaled down to take benefits from the quantum confinement effect, however, the presence of interfaces and the nature of materials adjacent to silicon turn out to be important and govern the physical properties. Utilization of visible light is a promising method to overcome the efficiency limit of the crystalline Si solar cells. Si quantum dots (QDs) have been proposed as an emission source of visible light, which is based on the quantum confinement effect. Light emission in the visible wavelength has been reported by controlling the size and density of Si QDs embedded within various types of insulating matrix. For the realization of all-Si QD solar cells with homojunctions, it is prerequisite not only to optimize the impurity doping for both p- and n-type Si QDs, but also to construct p-n homojunctions between them. In this study, XPS and SIMS were used for the development of p-type and n-type Si quantum dot solar cells. The stoichiometry of SiOx layers were controlled by in-situ XPS analysis and the concentration of B and P by SIMS for the activated doping in Si nano structures. Especially, it has been experimentally evidenced that boron atoms in silicon nanostructures confined in SiO2 matrix can segregate into the Si/$SiO_2$ interfaces and the Si bulk forming a distinct bimodal spatial distribution. By performing quantitative analysis and theoretical modelling, it has been found that boron incorporated into the four-fold Si crystal lattice can have electrical activity. Based on these findings, p-type Si quantum dot solar cell with the energy-conversion efficiency of 10.2% was realized from a [B-doped $SiO_{1.2}$(2 nm)/$SiO_2(2\;nm)]^{25}$ superlattice film with a B doping level of $4.0{\times}10^{20}\;atoms/cm^2$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.207-207
• /
• 2012

Si quantum dot (QD) imbedded in a $SiO_2$ matrix is a promising material for the next generation optoelectronic devices, such as solar cells and light emission diodes (LEDs). However, low conductivity of the Si quantum dot layer is a great hindrance for the performance of the Si QD-based optoelectronic devices. The effective doping of the Si QDs by semiconducting elements is one of the most important factors for the improvement of conductivity. High dielectric constant of the matrix material $SiO_2$ is an additional source of the low conductivity. Active doping of B was observed in nanometer silicon layers confined in $SiO_2$ layers by secondary ion mass spectrometry (SIMS) depth profiling analysis and confirmed by Hall effect measurements. The uniformly distributed boron atoms in the B-doped silicon layers of $[SiO_2(8nm)/B-doped\;Si(10nm)]_5$ films turned out to be segregated into the $Si/SiO_2$ interfaces and the Si bulk, forming a distinct bimodal distribution by annealing at high temperature. B atoms in the Si layers were found to preferentially substitute inactive three-fold Si atoms in the grain boundaries and then substitute the four-fold Si atoms to achieve electrically active doping. As a result, active doping of B is initiated at high doping concentrations above $1.1{\times}10^{20}atoms/cm^3$ and high active doping of $3{\times}10^{20}atoms/cm^3$ could be achieved. The active doping in ultra-thin Si layers were implemented to silicon quantum dots (QDs) to realize a Si QD solar cell. A high energy conversion efficiency of 13.4% was realized from a p-type Si QD solar cell with B concentration of $4{\times}1^{20}atoms/cm^3$. We will present the diffusion behaviors of the various dopants in silicon nanostructures and the performance of the Si quantum dot solar cell with the optimized structures.

• 센서학회지
• /
• 제8권3호
• /
• pp.283-290
• /
• 1999

본 연구에서는 고효율 단결정 실리콘 태양전지의 제작방법인 PERL방식을 사용하여 비저항이 $0.1{\sim}2{\Omega}{\cdot}cm$을 갖는 (100)면의 p형실리콘 기판으로 $n^+/p/p^+$ 접합의 태양전지를 제작하였다. 이를 위해 웨이퍼의 절단, KOH을 사용한 역피라미드 모양으로의 에칭, 인과붕소의 도핑, 반사방지막과 전극의 증착 및 열처리 등의 공정을 행하였다. 이때 소자표면의 광학적인 특성과 도핑농도가 저항값에 미치는 영향을 조사하고, Silvaco로 $n^+$도핑에 대한 확산 깊이와 도핑농도를 시뮬레이션하여 측정치와 비교하였다. AM(air mass) 1.5 조건하에서 입사되는 빛의 세기가 $100\;mW/cm^2$인 경우의 단락전류는 43 mA, 개방전압은 0.6 V, 그리고 충실도는 0.62였다. 이때 제작된 태양전지의 광전변환효율은 16%였다.