DOI QR코드

DOI QR Code

A Study on Weld Characteristics Analysis of Dissimilar Material (A105-A312) and Shape Friction Welding for Marine Plant Piping

해양 플랜트 배관용 이종 소재(A105-A312) 및 이종 형상 마찰용접의 용접 특성 분석에 대한 연구

  • Kong, Yu-Sik (Region Collaboration Center of LINC+, Pukyong National Univ.) ;
  • Kim, Tae Wan (Dept. of Mechanical Engineering, Pukyong National Univ.) ;
  • Kwak, Jae Seob (Dept. of Mechanical Engineering, Pukyong National Univ.) ;
  • Ahn, Yong Sik (Dept. of Material Science & Engineering, Pukyong National Univ.) ;
  • Park, Young Whan (Dept. of Mechanical Engineering, Pukyong National Univ.)
  • 공유식 (국립부경대학교 링크플러스사업단) ;
  • 김태완 (국립부경대학교 기계공학과) ;
  • 곽재섭 (국립부경대학교 기계공학과) ;
  • 안용식 (국립부경대학교 재료공학과) ;
  • 박영환 (국립부경대학교 기계공학과)
  • Received : 2019.11.12
  • Accepted : 2019.12.31
  • Published : 2020.03.31

Abstract

This paper studies the main parameters of tube-to-bar dissimilar material and shape friction welding for piping materials. The weldability of joint parts was investigated with respect to tensile tests, micro-Vickers hardness, the bond of area, and optical microstructure. The specimens are tested as-welded. Optimal welding conditions are n = 2000 rpm, HP = 50 MPa, UP = 100 MPa, HT = 5 sec, and UT = 10 sec when the metal loss (Mo) is 11 mm. Moreover, the same two materials for friction welding are strongly mixed with a well-combined structure of micro-particles without any molten material, particle growth, or defects. Therefore, the expected result of dissimilar material friction welding includes a reduction of cost and material in the welding process.

Keywords

References

  1. Cho, H. S. and Suh, S. J., "Friction Welding of Inconel 713C and SCM440," Journal of KWS, Vol. 15, No. 6, pp. 78-84, 1997.
  2. Uday, M. B., Ahmad Fauzi, M. N., Zuhailawati, H. and Ismail, A. B., "Advances in Friction Welding Process: a Review," Science and Technology of Welding and Joining, Vol. 15, No. 7, pp. 534-558, 2010. https://doi.org/10.1179/136217110X12785889550064
  3. American Welding Society, "Welding Handbook -Vol. 2," AWS, pp. 672-763, 1991.
  4. Kong, Y. S., Yoon, S. P. and Kim, S. J., "Mechanical Properties of Friction Welded SM45C-SF45 Joints for Automobile Reverse Idle Gear Shaft Applications," Transactions of the Korean Society of Mechanical Engineers A, Vol. 34, No. 1, pp. 85-90, 2010. https://doi.org/10.3795/KSME-A.2010.34.1.85
  5. Kong, Y. S. and Kim, S. J., "Mechanical Properties of Dissimilar Friction Welded Steel Bars in Relation to Post Weld Heat Treatment," Transactions of the Korean Society of Mechanical Engineers A, Vol. 30, No. 4, pp. 402-408, 2006. https://doi.org/10.3795/KSME-A.2006.30.4.402
  6. ASTM, "ASTM E384-05 Standard Test method for Microindentation Hardness of Materials," ASTM Standard, 2005.
  7. Chung, N. Y. and Park, C. H., "Establishment of Fracture Criterion on Friction Welded Dissimilar Materials," Transactions of the Korean Society of Automotive , Vol. 14, No. 5, pp. 164-171, 2006.