한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제24권6호
  • /
  • Pages.146-152
  • /
  • 2020
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

초음파 속도법을 활용한 강판의 두께 변화 탐지를 위한 기초연구

A Basic Study on the Varying Thickness Detection of Steel Plate Using Ultrasonic Velocity Method

  • 투고 : 2020.11.09
  • 심사 : 2020.12.02
  • 발행 : 2020.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 강교량의 폐합부재 등 시각적으로 탐지하기 어려운 부위의 강재에 대한 손상을 탐지하기 위한 방법을 개발하기 위한 목적의 기초연구이다. 여러 비파괴 방법들 중에서 초음파 속도법을 활용하여 두께가 다른 시편에 대해서 초음파 속도법을 실시하여, 평균 매질내 전파속도를 도출하였고, 이를 활용하여 강재 부재에 대한 회귀분석을 실시하였다. 동일한 재료일 경우 회귀분석의 결과를 활용하면 다른 부재의 두께를 도출할 수 있을 것으로 예상된다. 또한, 광범위한 범위를 스캐닝하기 위해 200 mm/s로 이동하는 연속스캐닝 기법을 검토하였고, 두께가 변화는 부재의 두께를 효과적으로 예측할 수 있었다.

This study was initiated to develop an effective inspection method to detect defects such as corrosion in closed-cell steel members in steel-box girder bridges. The ultrasonic velocity method among various non-destructive method was selected as a rapid and effective method to derive the average propagation velocity in the medium by using the ultrasonic wave velocity method for specimens of different thickness. The regression analysis was performed based on the experimental results, and the results was interpolated to evaluate the prediction accuracy. If the material properties are identical, this ultrasonic velocity method can predict the thickness using the averaged transmitted velocity. In addition, a continuous scanning method moving at 200 mm/s was tested for scanning a wide area of a bridge. The results exhibited that the continuous scanning method was able to effectively scan the different thickness of a bridge.

키워드

참고문헌

  1. Ahn, J. H., Nam, D. K., Lee, W. H., Huh, J., Kim, I. T. (2016), Evaluation of Compressive Strengths of Tubular Steel Members According to Corrosion Damage and Shape, Journal of Korean Society of Steel Construction, 28(4), 213-222. https://doi.org/10.7781/kjoss.2016.28.4.213
  2. Andrade, C., Alonso, C. (1996), Corrosion Rate Monitoring in the Laboratory and On Site", Construction Building Materials, 10(5),.315-328. https://doi.org/10.1016/0950-0618(95)00044-5
  3. Hong, S., Lee, Y., Kim, S., Kim, J. (2018), Estimation of Compressive Strength of Reinforced Concrete Vertical and Horizonal Members Using Ultrasonic Pulse Velocity Method, Journal of the Korea Institute for Structural Maintenance and Inspection, 22(6), 197-205. https://doi.org/10.11112/JKSMI.2018.22.6.197
  4. Jeong, Y., Kim, W., Lee, I., Lee, J., Kim, J. (2016a), Definition, End-of-life Criterion and Prediction of Service Life for Bridge Maintenance, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(4), 68-76. https://doi.org/10.11112/jksmi.2016.20.4.068
  5. Jeong, Y., Kim, W., Lee, I., Lee, J. (2016b), Development of Bridge Inspection Reliability and Improvement Strategy, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(5), 50-57. https://doi.org/10.11112/jksmi.2016.20.5.050
  6. Jeong, Y., Kim, W., Lee, I., Lee, J. (2016c), Bridge Life Cycle Cost Analysis of Preventive Maintenance, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(6), 1-9. https://doi.org/10.11112/jksmi.2016.20.6.001
  7. Lee, H., Lee, B., Oh, K., Kim, Y. (2015), Reliability Evaluation for Prediction of Concrete Compressive Strength through Impact Resonance Method and Ultra Pulse Velocity Method, Journal of the Korea Institute for Structural Maintenance and Inspection, 19(4), 18-24. https://doi.org/10.11112/jksmi.2015.19.4.018
  8. Lee, M. J., Ahn, J. H., Kim, I. T. (2014), Shear Buckling Strength and Behaviors of Steel Plate Girder with Asymmetrical Shear Resistant Web Panel by Local Corrosion, Journal of Korean Society of Steel Construction, 26(2), 105-118. https://doi.org/10.7781/kjoss.2014.26.2.105
  9. Kim, I., Chang, H. J., Cheung, J. Y. (2010) An Experimental Study on the Evaluation of Residual Tensile Load-carrying Capacity of Corroded Steel Plates of Temporary Structure, Journal of Korean Society of Steel Construction, 22(5), 399-409.
  10. Kim, I., Lee, M., Shin, C. (2011), An Experimental Study on Evaluation of Axially Compressive Buckling Strength of Corroded Temporary Steel, Journal of the Korea Institute for Structural Maintenance and Inspection, 19(4), 18-24. https://doi.org/10.11112/jksmi.2015.19.4.018
  11. Kim, M. W., Oh, H., Oh, K. C. (2016), Estimating the Compressive Stregnth of High-Strength Concrete Using Surface Rebound Value and Ultrasonic Velocity, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(2), 1-9. https://doi.org/10.11112/jksmi.2016.20.2.001
  12. Korean Agency for Technology and Standards (KATS) (2018), Testing method for velocity of ultrasonic pulses to conclude compressive strength of concrete, KS F 2731.
  13. KOSIS (2015), Status of the National Bridges and Tunnels in Republic of Korea, Korea Statistical Information Service, Korea.
  14. Kwon, S. J., Park, S. S. (2012), Non Destructive Technique for Steel Corrosion Detection Using Heat Induction and IR Thermography, Journal of the Korea Institute for Structural Maintenance and Inspection, 16(2), 40-48. https://doi.org/10.11112/jksmi.2012.16.2.040
  15. Yun, J., Paik, I., Cho, S., Chung, L. (2006), Non-Destructive Corrosion Measurement Technique of Reinforcing Bars Using Infrared Thermography according to Atmosphere Temperature, Proceedings of 2006 Fall Conference of Korea Concrete Institute, 18(2), 233-236.