DOI QR코드

DOI QR Code

Mitigation of seismic collision between adjacent structures using roof water tanks

  • Mahmoud, Sayed (Department of Civil and Construction Engineering, College of Engineering, Imam Abdulrahman Bin Faisal University)
  • Received : 2019.09.04
  • Accepted : 2019.11.19
  • Published : 2020.02.25

Abstract

The potential of using the roof water tanks as a mitigation measure to minimize the required separation gap and induced pounding forces due to collisions is investigated. The investigation is carried out using nonlinear dynamic analysis for two adjacent 3-story buildings with different dynamic characteristics under two real earthquake motions. For such analysis, nonlinear viscoelastic model is used to simulate forces due to impact. The sloshing force due to water movement is modelled in terms of width of the water tank and the instantaneous wave heights at the end wall. The effect of roof water tanks on the story's responses, separation gap, and magnitude and number of induced pounding forces are investigated. The influence of structural stiffness and storey mass are investigated as well. It is found that pounding causes instantaneous acceleration pulses in the colliding buildings, but the existence of roof water tanks eliminates such acceleration pulses. At the same time the water tanks effectively reduce the number of collisions as well as the magnitude of the induced impact forces. Moreover, buildings without constructed water tanks require wider separation gap to prevent pounding as compared to those with water tanks attached to top floor under seismic excitations.

Keywords

References

  1. Abdeddaim, M., Ounis, A. and Djedoui, N. (2016), "Pounding hazard mitigation between adjacent planar buildings using coupling strategy", J. Civil Struct. Hlth. Monit., 6(3), 603-617. https://doi.org/10.1007/s13349-016-0177-4.
  2. Abdel Mooty, M.N. and Ahmed, N.A, (2017), "Pounding mitigation in buildings using localized interconnections", The 2017 World Congress on Advances in Structural Engineering and Mechanics - AEM17 Seoul, Korea.
  3. Abdel Raheem, S.E, Fooly, M.Y.M., AbdelShafy, A.G.A., Abbas, Y.A., Omar, M., Taha, A.M. and AbdelLatif, M.M.S. (2019a), "Numerical simulation of potential seismic pounding among adjacent buildings in series", Bull. Earthq. Eng., 17(1), 439-471. https://doi.org/10.1007/s10518-018-0455-0
  4. Abdel Raheem, S.E. (2014), "Mitigation measures for earthquake induced pounding effects on seismic performance of adjacent buildings", Bull. Earthq. Eng., 12(4), 1705-1724. https://doi.org/10.1007/s10518-014-9592-2
  5. Abdel Raheem, S.E., Ahmed, M.M.M., Ahmed, M.M. and Abdel-Shafy, A.G.A. (2018a), "Evaluation of plan configuration irregularity effects on seismic response demands of L-shaped MRF buildings", Bull. Earthq. Eng., 16(9), 3845-3869. https://doi.org/10.1007/s10518-018-0319-7
  6. Abdel Raheem, S.E., Fooly, M.Y.M., AbdelShafy, A.G.A., Abbas, Y.A., Omar, M., Taha, A.M., AbdelLatif, M.M.S. and Mahmoud, S. (2018b), "Seismic pounding effects on adjacent buildings in series with different alignment configurations", Steel Compos. Struct., 28(3), 289-308. https://doi.org/10.12989/SCS.2018.28.3.289
  7. Abdel Raheem, S.E., Fooly, Y.M.F., Omar, M. and Abdel Zaher, A.K. (2019b), "Seismic pounding effects on the adjacent buildings with eccentric alignment", Earthq. Struct., 16(6), 715-726. https://doi.org/10.12989/EAS.2019.16.6.715
  8. Abdullah, M., Hanif, J.H., Richardson, A. and Sobanjo, J. (2001), "Use of a shared tuned mass damper (STMD) to reduce vibration and pounding in adjacent structures", Earthq. Eng. Struct. Dyn., 30(8), 1185-1201. https://doi.org/10.1002/eqe.58
  9. Anagnostopoulos, S. and Spiliopoulos, K. (1992), "An investigation of earthquake induced pounding between adjacent buildings", Earthq. Eng. Struct. Dyn., 21, 289-302. https://doi.org/10.1002/eqe.4290210402
  10. Anagnostopoulos, S.A. (1988), "Pounding of buildings in series during earthquakes", Earthq. Eng. Struct. Dyn., 16(3), 443-456. https://doi.org/10.1002/eqe.4290160311
  11. Anagnostopoulos, S.A. and Karamaneas, C.E. (2008), "Use of collision shear walls to minimize seismic separation and to protect adjacent buildings from collapse due to earthquake-induced pounding", Earthq. Eng. Struct. Dyn., 37, 1371-1388. https://doi.org/10.1002/eqe.817
  12. Cao, L. and Li C. (2019), "Tuned tandem mass dampers-inerters with broadband high effectiveness for structures under white noise base excitations", Struct. Control Hlth. Monit., 26(3), e2319. https://doi.org/10.1002/stc.2319.
  13. Dyke, S.J., Spencer, B.F., Sain, M.K. and Carlson, J.D. (1998), "An experimental study of MR dampers for seismic protection", Smart Mater. Struct., 7(5), 693-705. https://doi.org/10.1088/0964-1726/7/5/012
  14. Elwardany, H., Seleemah, A. and Jankowski, R. (2017), "Seismic pounding behavior of multi-story buildings in series considering the effect of infill panels", Eng. Struct., 144(1), 1201-1217.
  15. Favvata, J.M., Karayannis, C.G. and Liolios, A.A. (2009), "Influence of exterior joint effect on the inter-story pounding interaction of structures", Struct. Eng. Mech., 33(2), 113-136. https://doi.org/10.12989/sem.2009.33.2.113
  16. GRM (2009), M6.3 L'Aquila, Italy, Earthquake Field Investigation Report, Global Risk Miyamoto, Sacramento, California, USA.
  17. Guenidi, M.Z., Abdeddaima, M., Ounisa, A., Shrimali, M.K. and Datta, T.K. (2017), "Control of adjacent buildings using shared tuned mass damper", Procedia Eng., 199, 1568-1573. https://doi.org/10.1016/j.proeng.2017.09.059
  18. Jankowski, R. (2005), "Non-linear viscoelastic modelling of earthquake-induced structural pounding", Earthq. Eng. Struct. Dyn., 34, 595-611. https://doi.org/10.1002/eqe.434
  19. Jankowski, R. (2007), "Theoretical and experimental assessment of parameters for the non-linear viscoelastic model of structural pounding", J. Theo. Appl. Mech., 45(4), 931-942.
  20. Jankowski, R. (2008), "Earthquake-induced pounding between equal height buildings with substantially different dynamic properties", Eng. Struct., 30, 2818-2829. https://doi.org/10.1016/j.engstruct.2008.03.006.
  21. Jankowski, R. and Mahmoud, S. (2016), "Linking of adjacent three-storey buildings for mitigation of structural pounding during earthquakes", Bull. Earthq. Eng., 14(11), 3075-3097. https://doi.org/10.1007/s10518-016-9946-z
  22. Karayannis, C.G. and Favvata, M.J. (2005a), "Inter-story pounding between multistory reinforced concrete structures", Struct. Eng. Mech., 20(5), 505-526. https://doi.org/10.12989/sem.2005.20.5.505
  23. Karayannis, C.G. and Favvata, M.J. (2005b), "Earthquake-induced interaction between adjacent reinforced concrete structures with non-equal heights", Earthq. Eng. Struct. Dyn., 34, 1-20. https://doi.org/10.1002/eqe.398
  24. Karayannis, C.G. and Naoum, M.C. (2018), "Torsional behavior of multistory RC frame structures due to asymmetric seismic interaction", Eng. Struct., 163, 93-111. https://doi.org/10.1016/j.engstruct.2018.02.038
  25. Kasai, K. and Maison, B.F. (1997), "Building pounding damage during the 1989 Loma Prieta Earthquake", Eng. Struct., 3(19), 195-207. https://doi.org/10.1016/S0141-0296(96)00082-X
  26. Kim, S.H., Lee, S.W and Mha, H.S. (2000), "Dynamic behaviors of the bridge considering pounding and friction effects under seismic excitations", Struct. Eng. Mech., 10, 621-633. https://doi.org/10.12989/sem.2000.10.6.621
  27. Komodromos P, Polycarpou PC, Papaloizou L and Phocas MC. (2007), "Response of seismically isolated buildings considering poundings", Earthq. Eng. Struct. Dyn., 36, 1605-1622. https://doi.org/10.1002/eqe.692
  28. Mahmoud, S. and Gutub, S. (2013), "Earthquake induced pounding-involved response of base-isolated buildings incorporating soil flexibility", Adv. Struct. Eng., 16(12), 71-90.
  29. Mahmoud, S. and Jankowski, R. (2010), "Pounding-involved response of isolated and non-isolated buildings under earthquake excitation", Earthq. Struct., 1(3), 3250-3262.
  30. Mahmoud, S., Abdelhameed, A. and Jankowski R. (2013), "Earthquake-induced pounding between equal height multi-storey buildings considering soil-structure interaction", Bull. Earthq. Eng., 11(4), 1021-1048. https://doi.org/10.1007/s10518-012-9411-6
  31. Mahmoud, S., Genidy, M. and Tahoon, H. (2017), "Time-history analysis of reinforced concrete frame buildings with soft storeys", Arab. J. Sci. Eng., 42(3), 1201-12017. https://doi.org/10.1007/s13369-016-2366-1
  32. Maison, B.F. and Kasai, K. (1992), "Dynamics of pounding when two buildings collide", Earthq. Eng. Struct. Dyn., 21, 957-77.
  33. Moustafa, A. and Mahmoud, S. (2014), "Damage assessment of adjacent buildings under earthquake loads", Eng. Struct., 61, 153-165. https://doi.org/10.1016/j.engstruct.2014.01.004
  34. Reed, D.A., Yu, J., Yeh, H. and Gardarsson, S. (1998), "Investigation of tuned liquid dampers under large amplitude excitation", J. Eng. Mech., 124(4), 405-413. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:4(405)
  35. Rosenblueth, E. and Meli, R. (1986), "The 1985 Earthquake: causes and effects in Mexico City", Concrete Int., ACI, 5(8), 23-36.

Cited by

  1. Evaluation of required seismic gap between adjacent buildings in relation to the Egyptian Code vol.78, pp.2, 2020, https://doi.org/10.12989/sem.2021.78.2.219
  2. Dimensional pounding response analysis for adjacent inelastic MDOF structures based on modified Kelvin model vol.79, pp.3, 2020, https://doi.org/10.12989/sem.2021.79.3.347