DOI QR코드

DOI QR Code

Evaluation of Characteristics of Anisotropic Deformation in Manufacturing of Large-scale Glass-ceramic Composite Sintered Body

대형 유리-세라믹 복합 매질 소결체 제조 시 비등방성 변형 특성 평가

  • Received : 2019.08.29
  • Accepted : 2019.12.09
  • Published : 2020.03.30

Abstract

We studied the anisotropic shrinkage and deformation characteristics of large size sintered bodies in the manufacturing of glass-ceramic composite wasteform. We used uranium-bearing waste, generated from the treatment of spent uranium catalyst. Sintered specimens were prepared in several forms, comprising a circular disk, and a quarter disk in several diameters of up to 40 cm. Regardless of form or size, the sintered bodies had high isotropic shrinkage when they were fabricated using green bodies prepared at 60 MPa. The average anisotropy rate and average shrinkage rate were 1.6%, and 37.4%, respectively. We confirmed that the glass-ceramic composite wasteform in a large scale disk-type for packing in a 200 L drum could be fabricated with a tolerable anisotropy shrinkage. This has resulted in a significant reduction in the volume of radioactive waste to be disposed of with highly stable wasteform.

본 연구에서는 우라늄 폐촉매 처리 공정에서 발생하는 우라늄 함유 폐기물 대상으로 유리-세라믹 매질 구조의 대형 디스크 소결체 형태로 제작 시, 최종 제작된 소결체의 비등방향 수축 특성 및 변형율 변화를 연구하였다. 본 연구에서는 최대 직경 40 cm를 갖는 다양한 크기 원형 디스크 형태와 원형 디스크의 1/4 크기의 부채꼴 형 소결체를 제작하여 이들의 비등방성 수축 특성을 평가하였다. 60 MPa 압력하에서 만들어지는 성형체는 소결 시 성형체의 크기 및 형태에 관계없이 높은 등방성 수축하였다. 제조된 전체 소결체에 대한 비등방성율은 평균 1.6%이었고 이때 평균 부피 감용율은 37.4% 이었다. 이러한 결과로부터 국내에서 발생한 우라늄 폐촉매를 처리하기 위한 공정에서 발생하는 우라늄 함유 폐기물은 대형 디스크 형태의 유리-세라믹 매질 형태로 고형화함으로써 높은 안정성과 부피감용 효과를 가지며 200 L 드럼에 포장될 수 있음이 확인되었다.

Keywords

References

  1. K. Sawada, D. Hirabayashi, and Y. Enokida, Reaction of Antimony-Uranium Composite Oxide in the Chlorination Treatment of Waste Catalyst, Waste Management 2013, Phoenix. AZ. 2013.
  2. K.W. Kim, M.J. Kim, M.K. Oh, J. Kim, H.H. Sung, R. I. Foster, and K.Y. Lee, "Development of a Treatment Process and Immobilization Method for the Volume Reduction of Uranium-bearing Spent Catalysts for Final Disposal", J. Nucl. Sci. & Tech., 55(12), 1459-1472 (2018). https://doi.org/10.1080/00223131.2018.1516578
  3. K.W. Kim, R.I. Foster, J. Kim, H.H. Sung, D. Yang, W.J. Shon, M.K. Oh, and K.Y. Lee, "Glass-ceramic Composite Wasteform to Immobilize and Stabilize a Uranium-bearing Waste Generated From Treatment of a Spent Uranium Catalyst", J. Nucl. Mat., 516, 238-246 (2019) https://doi.org/10.1016/j.jnucmat.2019.01.005
  4. K.W. Kim, M.K. Oh, W.J. Shon, R.I. Foster, K.Y. Lee, Treatment of Uranium Catalyst Waste for High Volume Reduction of the Final Waste to be Disposed, Waste Management 2019, Phoenix. AZ. 2019.
  5. US Patent 3,988,359, Catalyst for Use in and Process for Preparing Acrylonitrile (1976).
  6. K.W. Kim, M.J. Kim, M.K. Oh, J. Kim, R.I. Foster, and K.Y. Lee, "Volume Reduction of Uranium Catalyst Waste for Final Disposal", Eurasia 2018 Waste Management Symposium, Istanbul (2018).
  7. KR Patent 10-1989910, Volume Reduction Treatment Method of Spent Uranium Catalyst (2019).
  8. International Atomic Energy Agency, Handbook, Conditioning of Low- and Intermediate-level Liquid and Solid waste, IAEA-TECDOC, IAEA, Vienna, to be printed (2020).
  9. D. Caurant, P. Loiseau, O. Majerus, V. Aubin-Chevaldonnet, I. Bardez, A. Quintas, Glass, Glass-ceramics and Ceramics for Immobilization of Highly Radioactive Nuclear Waste, Nova Sci. Pub. Inc., Paris (2009).
  10. Michael I. Ojovan, Handbook of Advanced Radioactive Waste Conditioning Technologies, Woodhead Publishing (2011).
  11. I.W. Donald, B. L. Metcalfe, and R. N. J. Taylor, "Review: The Immobilization of High Level Radioactive Waste Using Ceramics and Glasses", J. Mat. Sci., 32, 5851-5887 (1997). https://doi.org/10.1023/A:1018646507438
  12. J. Choi, W. Um, and S. Choung, "Development of Iron Phosphate Ceramic Waste Form to Immobilize Radioactive Waste Solution", J. Nucl. Mat., 452, 16-23 (2014). https://doi.org/10.1016/j.jnucmat.2014.04.033
  13. V.S. Department of Energy, Stabilization /Solidification Processes From Mixed Waste, DOE Report EPA 402-R-96-014 (1996).
  14. International Atomic Energy Agency, Containers for packing of solid and intermediate Level Radioactive Waste, IAEA report, Technical reports series No.355 (1993).
  15. V. S. Thorat, R. K. Mishra, V. Sudarsan, A. Kumar, A. K. Tyagi, and C.P. Kaushik, "Leaching Studies on Borosilicate Glasses for the Immobilization of High-level Radioactive Waste in the Pellet Form Subjected to Aggressive Test Conditions", Bull. Mater.Sci., 42, 211-218 (2019). https://doi.org/10.1007/s12034-019-1900-7
  16. F. Dorai, M. Rolland, A. Wachs, M. Marcoux, and E. Climent, "Packing Fixed Bed Reactors Withy Cylinders: Influence of Particle Length Distribution, Procedia Engineering", 42, 1335-1345 (2012) https://doi.org/10.1016/j.proeng.2012.07.525
  17. Korea Nuclear Safety & Security Commission, Low and Intermediate Level Radioactive Waste Delivery Guide, Notification No.2015-4, 2014.
  18. Korea Radioactive Waste Agency, SAR 8.3 of Low and Intermediate Level Radioactive Waste Disposal Facility, KORAD Report (2016).
  19. KR Patent 10-1960721, Packing Method of Sintered Radioactive Solid Waste in Drum (2019).
  20. O. Bretcanu, X. Chatzistavrou, K. Paraskevopoulos, R. Conradt, I. Thompson, and A. R. Boccaccini, "Sintering and Crystallization of 45S5 Bioglass Powder", J. European Ceramic Soc., 3299-3306 (2009). https://doi.org/10.1016/j.jeurceramsoc.2009.06.035
  21. M.N. Rahaman, Ceramic processing and Sintering, 2nd ed. Marcel Dekker Inc., N.Y. 2003.
  22. A.R. Boccaccini, and R. Conradt, "Isotropic Shrinkage of Platelet Containing Glass Powder Compacts During Isothermal Sintering", Int. J. Inorg. Mater., 3, 101-106, (2001). https://doi.org/10.1016/S1466-6049(01)00005-8
  23. E.A. Olevsky and R.M. German, "Effect of Gravity on Dimensional Change During Sintering- 1. Shrinkage Anisotropy", Acta Mater., 48(5), 1153-1166 (2000). https://doi.org/10.1016/S1359-6454(99)00368-7
  24. S. Schiller and H.J. Schmidem, "Ultrafine Dust Filtration Using Precoat Materials Considering the Influence of Filter", Media. Chem. Eng. Tech., 37(6), 1009-1020 (2014). https://doi.org/10.1002/ceat.201300856
  25. Rilling K., "Precoat Filter Aids can Reduce Wastewater Treatment Costs", Environ. Sci. & Eng. Magazine, Nov./Dec.,12-14 (2014).
  26. Kuhn M., Briesen H., "Dynamic Modeling of Filter-aid Filtration Including Surface- and Depth-filtration Effects", Chem. Eng. Tech., 39(3), 425-434 (2016). https://doi.org/10.1002/ceat.201500347
  27. M. Ojovan, W.E. Lee, and S.N. Kaqlmykov, "An Introduction to Nuclear Waste Immobilization", 3rd Ed. Elsevier (2019).

Cited by

  1. Pilot-Scale Treatment of a Spent Uranium Catalyst Formally Used in the SOHIO Process: Pilot Plant Verification of the SENSEI Process vol.5, pp.19, 2020, https://doi.org/10.1021/acsomega.0c00723