Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Axisymmetric bending of a circular plate with symmetrically varying mechanical properties under a concentrated force

  • Received : 2019.10.17
  • Accepted : 2020.02.17
  • Published : 2020.03.25
⟨ Previous Next ⟩

Abstract

The subject of the paper is a circular plate with symmetrically thickness-wise varying mechanical properties. The plate is simply supported and carries a concentrated force located in its centre. The axisymmetric bending problem of the plate with consideration of the shear effect is analytically and numerically studied. A nonlinear function of deformation of the straight line normal to the plate neutral surface is assumed. Two differential equations of equilibrium based on the principle of stationary potential energy are obtained. The system of equations is analytically solved and the maximum deflections and shear coefficients for example plates are derived. Moreover, the maximum deflections of the plates are calculated numerically (FEM), for comparison with the analytical results.

Keywords

References

  1. Beni, N.N and Dehkordi, M.B. (2018), "An extension of Carrera unified formulation in polar coordinate for analysis of circular sandwich plate with FGM core using GDQ method", Comp. Struct. 185, 41-434. https://doi.org/10.1016/j.compstruct.2017.11.044.
  2. Debowski D., Magnucki K. and Malinowski M. (2010), „Dynamic stability of a metal foam rectangular plate", Steel Compos. Struct., 10(2), 151-168. https://doi.org/10.12989/scs.2010.10.2.151.
  3. Ferreira, A.J.M., Roque, C.M.C. and Martins, P.A.L.S. (2003), "Analysis of composite plates using higher-order shear deformation theory and a finite point formulation based on the multiquadric radial basis function method", Comp. Part B Eng., 34(7), 627-636. https://doi.org/10.1016/S1359-8368(03)00083-0.
  4. Feyzi, M.R. and Khorshidvand, A.R. (2017), "Axisymmetric postbuckling behavior of saturated porous circular plates", Thin-Walled Struct., 112, 149-158. https://doi.org/10.1016/j.tws.2016.11.026.
  5. Gunes, R. and Aydin, M. (2010), "Elastic response of functionally graded circular plates under a drop-weight", Compos. Struct., 92(10), 2445-2456. https://doi.org/10.1016/j.compstruct.2010.02.015.
  6. Jabbari, M., Mojahedin, A., Khorshidvand, A.R. and Eslami, M.R. (2014), "Buckling analysis of a functionally graded thin circular plate made of saturated porous materials", J. Eng. Mech. -ASCE, 140(2), 287-295. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000663.
  7. Jha, D.K., Kant, T. and Singh, R.K. (2013), "A critical review of recent research on functionally graded plates", Compos. Struct., 96, 833-849. https://doi.org/10.1016/j.compstruct.2012.09.001.
  8. Krivoshapko, S.N. (2007), "Research on general and axisymmetric ellipsoidal shells used as domes, Pressure vessels and tanks", Appl. Mech. Rev., 60(6), 336-355. https://doi.org/10.1115/1.2806278.
  9. Magnucka-Blandzi, E. (2008), "Axi-symmetrical deflection and buckling of circular porous-cellular plate", Thin-Wall. Struct. 46(3), 333-337. https://doi.org/10.1016/j.tws.2007.06.006.
  10. Magnucka-Blandzi, E., Wisniewska-Mleczko, K. and Smyczynski, M.J. (2018), "Buckling of symmetrical circular sandwich plates with variable mechanical properties of the core in the radial direction", Compos. Struct. 204, 88-94. https://doi.org/10.1016/j.compstruct.2018.07.020.
  11. Magnucki, K. (2018), "Elastic buckling of a cylindrical panel with symmetrically varying mechanical properties - analytical study", Compos. Struct., 204, 217-222. https://doi.org/10.1016/j.compstruct.2018.07.073.
  12. Magnucki, K. and Lewinski, J. (2019), "Bending of beams with symmetrically varying mechanical properties under generalized load - shear effect", Eng. Trans., 67(3), 441-457. https://doi.10.24423/EngTrans.987.20190509.
  13. Magnucki, K., Szyc, W. and Lewinski, J. (2002), "Minimization of stress concentration factor in cylindrical pressure vessels with ellipsoidal heads", Int. J. Press. Vessel Pip., 79(12), 841-846. https://doi.org/10.1016/S0308-0161(02)00101-1.
  14. Magnucki, K., Witkowski, D. and Magnucka-Blandzi, E. (2019), "Buckling and free vibrations of rectangular plates with symmetrically varying mechanical properties - Analytical and FEM studies", Compos. Struct., 220, 355-361. https://doi.org/10.1016/j.compstruct.2019.03.082.
  15. Maturi, D.A., Ferreira, A.J.M., Zenkour, A.M. and Mashat, D.S. (2014), "Analysis of sandwich plates with a new layerwise formulation", Compos. Part B Eng., 56, 484-489. https://doi.org/10.1016/j.compositesb.2013.08.086.
  16. Mojahedin, A., Jabbari, M., Khorshidvand, A.R. and Eslami, M.R. (2016), "Buckling analysis of functionally graded circular plates made of saturated porous materials based on higher order shear deformation theory", Thin-Wall. Struct., 99, 83-90. https://doi.org/10.1016/j.tws.2015.11.008.
  17. Reddy, J.N. (2010), "Nonlocal nonlinear formulations for bending of classical and shear deformation theories of beams and plates", Int. J. Eng. Sci., 48(11), 1507-1518. https://doi.org/10.1016/j.ijengsci.2010.09.020.
  18. Reddy, J.N. and Berry, J. (2012), "Nonlinear theories of axisymmetric bending of functionally graded circular plates with modified couple stress", Compos. Struct., 94(12), 3664-3668. https://doi.org/10.1016/j.compstruct.2012.04.019.
  19. Sahraee, S. and Saidi, A.R. (2009), "Axisymmetric bending analysis of thick functionally graded circular plates using fourth-order shear deformation theory", Europ. J. Mech. -A/Solids, 28(5), 974-984. https://doi.org/10.1016/j.euromechsol.2009.03.009.
  20. Saidi, A.R., Rasouli, A. and Sahraee, S. (2009), "Axisymmetric bending and buckling analysis of thick functionally graded circular plates using unconstrained third-order shear deformation plate theory", Compos. Struct., 89(1), 110-119. https://doi.org/10.1016/j.compstruct.2008.07.003.
  21. Shen, H.S. (2009), Functionally Graded Materials nonlinear analysis of plates and shells, CRC Press, Boca Raton, London, New York, USA.
  22. Sowinski, K. and Magnucki, K. (2018), "Shaping of dished heads of the cylindrical pressure vessel for diminishing of the edge effect", Thin-Wall. Struct., 131, 746-754. https://doi.org/10.1016/j.tws.2018.07.018.
  23. Timoshenko, S. and Woinowsky-Krieger, S. (1959), Theory of plates and shells, (Second Edition), McGraw-Hill Book Company, Inc., New York, Toronto, London.
  24. Ventsel, E. and Krauthammer, T. (2001), Thin plates and shells. Theory, analysis, and applications, Marcel Dekker Inc., New York, Basel, USA.
  25. Wu, C.-P. and Liu, Y.-C. (2016), "A state space meshless method for the 3D analysis of FGM axisymmetric circular plates", Steel Comp. Struct., 22(1), 161-182. https://doi.org/10.12989/scs.2016.22.1.161.
  26. Wu, C.P. and Yu, L.T. (2018), "Quasi-3D static analysis of twodirectional functionally graded circular plates", Steel Compos. Struct., 27(6), 89-801. https://doi.org/10.12989/scs.2018.27.6.789.
  27. Yun, W., Rongqiao, X. and Haojiang, D. (2010), "Threedimensional solution of axisymmetric bending of functionally graded circular plates", Compos. Struct., 92(7), 1683-1693. https://doi.org/10.1016/j.compstruct.2009.12.002.
  28. Zenkour, A.M. (2006), "Generalized shear deformation theory for bending analysis of functionally graded plates", Appl. Math. Model. 30(1), 67-84. https://doi.org/10.1016/j.apm.2005.03.009.
  29. Zingoni, A. (2002), "Discontinuity effects at cone-cone axisymmetric shell junctions", Thin-Wall. Struct., 40(10), 877-891. https://doi.org/10.1016/S0263-8231(02)00022-8.
  30. Zingoni, A. (2002), "Parametric stress distribution in shell-ofrevolution sludge digesters of parabolic ogival form", Thin-Wall. Struct., 40(7-8), 691-702. https://doi.org/10.1016/S0263-8231(02)00020-4.
  31. Zingoni, A., Enoma, N. and Govender, N. (2015), "Equatorial bending of an elliptic toroidal shell", Thin-Wall. Struct., 96, 286-294. https://doi.org/10.1016/j.tws.2015.08.017.
  32. Zingoni, A., Mokhothu, B. and Enoma, N. (2015), "A theoretical formulation for the stress analysis of multi-segmented spherical shells for high-volume liquid containment", Eng. Struct., 87, 21-31. https://doi.org/10.1016/j.engstruct.2015.01.002.