구강회복응용과학지 (Journal of Dental Rehabilitation and Applied Science)

  • 제36권1호
  • /
  • Pages.41-47
  • /
  • 2020
  • /
  • 2384-4353(pISSN)
  • /
  • 2384-4272(eISSN)
대한턱관절교합학회 (Korean Academy of Stomatognathic Function and Occlusion)
권호 표지
DOI QR코드

DOI QR Code

고반투명 유색 지르코니아의 굽힘강도와 신뢰도에 대한 연구

Flexural strength and reliability of highly translucent colored zirconia

  • 공현준 (원광대학교 치과대학 치과보철학교실)
  • Kong, Hyun-Jun (Department of Prosthodontics, College of Dentistry, Wonkwang University)
  • 투고 : 2020.03.01
  • 심사 : 2020.03.08
  • 발행 : 2020.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

목적: 본 연구의 목적은 전부도재 수복물을 위해 단일체로 사용되는 고반투명 유색 지르코니아의 굽힘강도 및 신뢰도를 평가하기 위함이다. 연구 재료 및 방법: 전부도재 수복물을 위해 사용되는 무색(A0) 및 유색(A1, A3)의 고반투명 지르코니아 블록을 사용하여 바 형태의 시편(25 × 4 × 2.5 mm)을 제작하였다. 지르코니아 블록의 색조에 따라 3개의 실험군을 설정하였고, 한 군당 20개의 시편을 제작하였다. 굽힘강도는 3점 굽힘시험을 통해 측정하였으며, 일원배치 분산분석을 이용하여 색조에 따른 통계적 유의성을 검증하였다. 다음으로 세라믹 재료 특성상 신뢰도를 평가하기 위해 와이블 분석을 시행하였으며, X선 회절분석으로 시편의 결정특성을 분석하였다. 결과: 무색 고반투명 지르코니아의 굽힘강도(1127.10 MPa)가 색조 A1 (995.71 MPa)과 A3 (1016.42 MPa)에 비해 통계학적으로 유의하게 높은 값을 보였다(P < 0.05). 색조 A1과 A3 사이에는 유의한 차이가 없었다(P > 0.05). 와이블 분석을 시행한 결과, 무색 고반투명 지르코니아가 유색에 비해 높은 신뢰도를 나타냈다. X선 회절분석 결과 모든 그룹에서 지르코니아 정방정상의 특징적인 피크를 보였다. 결론: 본 제한된 연구의 결과를 근거로 단일체로 사용되는 고반투명 지르코니아에 색조를 가미하는 것이 굽힘강도와 신뢰도를 저하시킬 수 있으며, 도재 파절을 방지하고 심미 증진을 위해 고반투명 지르코니아를 사용할 경우 색조 선택에 주의를 기울여야 할 것이다.

Purpose: The purpose of this study was to evaluate the flexural strength and reliability of highly translucent colored zirconia for all ceramic restoration. Materials and Methods: Bar-shaped specimens (25 × 4 × 2.5 mm) were prepared from highly translucent monolithic zirconia. Three experimental groups were set up according to color (shade A0, A1, and A3). For each group, 20 specimens were prepared. Flexural strength was determined using a 3-point flexural test and results were analyzed with one-way ANOVA test. Weibull statistical analysis provided 2 parameter estimates: Weibull modulus and characteristic strength. X-ray diffraction (XRD) analysis was performed. Results: There was statistically significant difference between uncolored (Shade A0) and colored (shade A1 and A3) (P < 0.05), but there was no difference between colored groups (P > 0.05). The uncolored group had higher reliability compared with colored study groups. On x-ray diffraction analysis of each group, typical peaks of tetragonal phase appeared in all groups. Conclusion: Within the limitations of this in vitro study, coloring highly translucent zirconia had significant effect on flexural strength and reliability. Therefore, clinicians should be careful when using highly translucent colored zirconia to prevent breakage of veneering ceramic and enhance aesthetics.

키워드

참고문헌

  1. Johansson C, Kmet G, Rivera J, Larsson C, Vult Von Steyern P. Fracture strength of monolithic allceramic crowns made of high translucent yttrium oxide-stabilized zirconium dioxide compared to porcelain-veneered crowns and lithium disilicate crowns. Acta Odontol Scand 2014;72:145-53. https://doi.org/10.3109/00016357.2013.822098
  2. Kim HK, Kim SH. Effect of the number of coloring liquid applications on the optical properties of monolithic zirconia. Dent Mater 2014;30:229-37.
  3. Inokoshi M, Shimizu H, Nozaki K, Takagaki T, Yoshihara K, Nagaoka N, Zhang F, Vleugels J, Van Meerbeek B, Minakuchi S. Crystallographic and morphological analysis of sandblasted highly translucent dental zirconia. Dent Mater 2018;34:508-18. https://doi.org/10.1016/j.dental.2017.12.008
  4. Kaya G. Production and characterization of selfcolored dental zirconia blocks. Ceram Int 2013;39:511-7. https://doi.org/10.1016/j.ceramint.2012.06.056
  5. Oh SC, Lee HH, Shin MR, Lee IK. Flexural strength of various colored and uncolored zirconia ceramics for all-ceramic restoration. J Dent Rehabil Appl Sci 2007;23:119-30.
  6. Hjerppe J, Narhi T, Froberg K, Vallittu PK, Lassila LV. Effect of shading the zirconia framework on biaxial strength and surface microhardness. Acta Odontol Scand 2008;66:262-7. https://doi.org/10.1080/00016350802247123
  7. Zhang F, Inokoshi M, Batuk M, Hadermann J, Naert I, Meerbeek BV, Vleugels J. Strength, toughness and aging stability of highly-translucent YTZP ceramics for dental restorations. Dent Mater 2016;32:e327-37.
  8. Zhang Y. Making yttria-stabilized tetragonal zirconia translucent. Dent Mater 2014;30:1195-203. https://doi.org/10.1016/j.dental.2014.08.375
  9. International Organization for Standardization. ISO 6872:2008. Dentistry - Ceramic materials. Available from: https://www.iso.org/standard/41385.html (updated 2020 Mar 10).
  10. Siarampi E, Kontonasaki E, Papadopoulou L, Kantiranis N, Zorba T, Paraskevopoulos KM, Koidis P. Flexural strength and the probability of failure of cold isostatic pressed zirconia core ceramics. J Prosthet Dent 2012;108:84-95. https://doi.org/10.1016/S0022-3913(12)60112-7
  11. Garcia Fonseca R, de Oliveira Abi-Rached F, dos Santos Nunes Reis JM, Rambaldi E, Baldissara P. Effect of particle size on the flexural strength and phase transformation of an airborne-particle abraded yttria-stabilized tetragonal zirconia polycrystal ceramic. J Prosthet Dent 2013;110:510-4. https://doi.org/10.1016/j.prosdent.2013.07.007
  12. Weibull W. A statistical distribution function of wide applicability. J Appl Mech 1951;18:293-7. https://doi.org/10.1115/1.4010337
  13. Ritter JE. Predicting lifetimes of materials and material structures. Dent Mater 1995;11:142-6. https://doi.org/10.1016/0109-5641(95)80050-6
  14. Kittl P, Diaz G. Weibull's fracture statistics or probabilistic strength of materials: state of the art. Res Mechanica 1988;24:99-207.
  15. Garvie RC, Nicholson PS. Phase analysis in zirconia systems. J Am Ceram Soc 1972;55:303-5. https://doi.org/10.1111/j.1151-2916.1972.tb11290.x
  16. Toraya H, Yoshimura M, Somiya S. Calibration curve for quantitative analysis of the monoclinictetragonal ZrO2 system by x-ray diffraction. J Am Ceram Soc 1984;67:119-21.
  17. Guess PC, Schultheis S, Bonfante EA, Coelho PG, Ferencz JL, Silva NR. All-ceramic systems: laboratory and clinical performance. Dent Clin North Am 2011;55:333-52. https://doi.org/10.1016/j.cden.2011.01.005
  18. Haff A, Lof H, Gunne J, Sjogren G. A retrospective evaluation of zirconia-fixed partial dentures in general practices: an up to 13-year study. Dent Mater 2015;31:162-70. https://doi.org/10.1016/j.dental.2014.11.009
  19. Stefanescu C, Ionita C, Nechita V, Drafta S, Oancea L, Petre A. Survival rates and complications for zirconia-based fixed dental prostheses in a period up to 10 years: a systematic review. Eur J Prosthodont Restor Dent 2018;26:54-61.
  20. Tong H, Tanaka CB, Kaizer MR, Zhang Y. Characterization of three commercial Y-TZP ceramics produced for their high-translucency, high-strength and high surface area. Ceram Int 2016;42:1077-85. https://doi.org/10.1016/j.ceramint.2015.09.033
  21. Ferrario VF, Sforza C, Zanotti G, Tartaglia GM. Maximal bite forces in healthy young adults as predicted by surface electromyography. J Dent 2004;32:451-7. https://doi.org/10.1016/j.jdent.2004.02.009
  22. Guazzato M, Quach L, Albakry M, Swain MV. Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic. J Dent 2005;33:9-18. https://doi.org/10.1016/j.jdent.2004.07.001
  23. Spyropoulou PE, Kamposiora P, Eliades G, Papavasiliou G, Razzoog ME, Thompson JY, Smith RL, Bayne SC. Composition, phase analysis, biaxial flexural strength, and fatigue of unshaded versus shaded Procera zirconia ceramic. J Prosthet Dent 2016;116:269-76. https://doi.org/10.1016/j.prosdent.2015.08.030
  24. Wen N, Yi YF, Zhang WW, Deng B, Shao LQ, Dong LM, Tian JM. The color of $Fe_{2}O_{3}$ and $Bi_{2}O_{3}$ pigmented dental zirconia ceramic. Key Engineering Materials 2010;434:582-5. https://doi.org/10.4028/www.scientific.net/KEM.434-435.582
  25. Ozer F, Naden A, Turp V, Mante F, Sen D, Blatz MB. Effect of thickness and surface modifications on flexural strength of monolithic zirconia. J Prosthet Dent 2018;119:987-93. https://doi.org/10.1016/j.prosdent.2017.08.007

피인용 문헌

  1. 착색 용액이 단일 구조 지르코니아의 이축 굴곡 강도에 미치는 영향 vol.59, pp.2, 2020, https://doi.org/10.4047/jkap.2021.59.2.190