참고문헌
- M. Maleki, G. A. El-Nagar, D. Bernsmeier, J. Schneider, and C. Roth, "Fabrication of an efficient vanadium redox flow battery electrode using a free-standing carbon-loaded electro-spun nanofibrous composite", Sci. Rep., 10(1), 1 (2020). https://doi.org/10.1038/s41598-019-56847-4
- G. Girishkumar, B. McCloskey, A. C. Luntz, S. Swanson, and W. Wilcke, "Lithium-air battery: promise and challenges", J. Phys. Chem., 1(14), 2193 (2010).
- Y. Ding, X. Guo, Y. Qian, L. Xue, A. Dolocan, and G. Yu, "Room-Temperature All-Liquid-Metal Batteries Based on Fusible Alloys with Regulated Interfacial Chemistry and Wetting", Adv. Mater., 32(30), 2002577 (2020). https://doi.org/10.1002/adma.202002577
- W. Van Schalkwijk and B. Scrosati, "Advances in Lithium-Ion Batteries introduction", pp.1-5 Springer, Boston, MA (2002).
- A. Manthiram, "A reflection on lithium-ion battery cathode chemistry", Nat. Commun., 11(1), 1 (2020). https://doi.org/10.1038/s41467-019-13993-7
- L. Lu, X. Han, J. Li, J. Hua, and M. Ouyang, "A review on the key issues for lithium-ion battery management in electric vehicles", J. Power Sources, 226(3-4), 272 (2013). https://doi.org/10.1016/j.jpowsour.2012.10.060
- S. M. Shin, N. H. Kim, J. S. Sohn, D. H. Yang, and Y. H. Kim, "Development of a metal recovery process from Li-ion battery wastes", Hydrometallurgy, 79, 172 (2005). https://doi.org/10.1016/j.hydromet.2005.06.004
- G. Nayaka, J. Manjanna, K. Pai, R. Vadavi, S. Keny, and V. Tripathi, "Recovery of valuable metal ions from the spent lithium-ion battery using aqueous mixture of mild organic acids as alternative to mineral acids", Hydrometallurgy, 151, 73 (2015). https://doi.org/10.1016/j.hydromet.2014.11.006
- W. Gao, X. Zhang, X. Zheng, X. Lin, H. Cao, Y. Zhang, and Z. Sun, "Lithium carbonate recovery from cathode scrap of spent lithium-ion battery: a closed-loop process", Environ. Sci. Technol., 51(3), 1662 (2017). https://doi.org/10.1021/acs.est.6b03320
- Y. Wang and W. Zhu, "Micro/nano-structured Li4Ti5O12 as high rate anode material for lithium ion batteries", Solid State Ionics, 349, 115297 (2020). https://doi.org/10.1016/j.ssi.2020.115297
- P. Kumar, C. L. Berhaut, D. Zapata Dominguez, E. De Vito, S. Tardif, S. Pouget, S. Lyonnard, and P. H. Jouneau, "Nano-Architectured Composite Anode Enabling Long-Term Cycling Stability for High-Capacity Lithium-Ion Batteries", Small, 16(11), 1906812 (2020). https://doi.org/10.1002/smll.201906812
- H. J. Kim, M. H. Seo, M. H. Park, and J. P. Cho, "A critical size of silicon nano-anodes for lithium rechargeable batteries", Ange. Chem. Inter. Ed., 49(12), 2146 (2010). https://doi.org/10.1002/anie.200906287
- C. He, S. Wu, N. Zhao, C. Shi, E. Liu, and J. Li, "Carbon-encapsulated Fe3O4 nanoparticles as a high-rate lithium ion battery anode material", ACS Nano, 7(5), 4459 (2013). https://doi.org/10.1021/nn401059h
- C. De las Casas and W. Li, "A review of application of carbon nanotubes for lithium ion battery anode material", J. Power Sources, 208, 74 (2012). https://doi.org/10.1016/j.jpowsour.2012.02.013
- G. H. An and H. J. Ahn, "Electrode Properties of Li-ion Batteries using TiO2-based Composite Nanowires", J. Microelectron. Packag. Soc., 18(3), 19 (2011). https://doi.org/10.6117/kmeps.2011.18.3.019
- J. Zhang, K. Xiao, T. Zhang, G. Qian, Y. Wang, and Y. Feng, "Porous nickel-cobalt layered double hydroxide nanoflake array derived from ZIF-L-Co nanoflake array for battery-type electrodes with enhanced energy storage performance", Electrochim. Acta, 226, 113 (2017). https://doi.org/10.1016/j.electacta.2016.12.195
- J. Yao, B. Liu, S. Ozden, J. Wu, S. Yang, M.-T. F. Rodrigues, K. Kalaga, P. Dong, P. Xiao, and Y. Zhang, "3D nanostructured molybdenum diselenide/graphene foam as anodes for long-cycle life lithium-ion batteries", Electrochim. Acta., 176, 103 (2015). https://doi.org/10.1016/j.electacta.2015.06.138
- J. S. Park, S. S. Hyeon, S. H. Jeong, and H.-J. Kim, "Performance enhancement of Li-ion battery by laser structuring of thick electrode with low porosity", J. Ind. Eng. Chem., 70, 178 (2019). https://doi.org/10.1016/j.jiec.2018.10.012
- I. Y. Kang, J. Y. Jang, M.-S. Kim, J.-W. Park, J.-H. Kim, and Y. W. Cho, "Nanostructured silicon/silicide/carbon composite anodes with controllable voids for Li-ion batteries", Mater. Des., 120, 230 (2017). https://doi.org/10.1016/j.matdes.2017.02.018
- S. Ouyang, Y. Xie, D. Wang, D. Zhu, X. Xu, T. Tan, J. DeFranco, and H. H. Fong, "Photolithographic patterning of highly conductive PEDOT: PSS and its application in organic light-emitting diodes", J. Polym. Sci. B: Polym. Phys., 52(18), 1221 (2014). https://doi.org/10.1002/polb.23547
- M. J. Kim, M. J. Lee, H. G. Min, S. H. Kim, J. H. Yang, H. M. Kweon, W. S. Lee, D. H. Kim, J.-H. Choi, and D. Y. Ryu, "Universal three-dimensional crosslinker for all-photopatterned electronics", Nat. Commun., 11(1), 1 (2020). https://doi.org/10.1038/s41467-019-13993-7
- J. A. DeFranco, B. S. Schmidt, M. Lipson, and G. G. Malliaras, "Photolithographic patterning of organic electronic materials", Org. Electron., 7(1), 22 (2006). https://doi.org/10.1016/j.orgel.2005.10.002
- W. Li and M. C. Marconi, "Extreme ultraviolet Talbot interference lithography", Opt. Express, 23(20), 25532 (2015). https://doi.org/10.1364/OE.23.025532
- S.-K. Kim, "Extreme Ultraviolet Multilayer Defect Compensation in Computational Lithography", J. Nanosci. Nanotechnol., 16(5), 5415 (2016). https://doi.org/10.1166/jnn.2016.12254
- W. I. Park, K. H. Kim, H. I. Jang, J. W. Jeong, J. M. Kim, J. S. Choi, J. H. Park, and Y. S. Jung, "Directed Self-Assembly with Sub-100 Degrees Celsius Processing Temperature, Sub-10 Nanometer Resolution, and Sub-1 Minute Assembly Time", Small, 8(24), 3762 (2012). https://doi.org/10.1002/smll.201201407
- S.-J. Jeong, J. Y. Kim, B. H. Kim, H.-S. Moon, and S. O. Kim, "Directed self-assembly of block copolymers for next generation nanolithography", Mater. Today., 16(12), 468 (2013). https://doi.org/10.1016/j.mattod.2013.11.002
- J. M. Kim, Y. Kim, W. I. Park, Y. H. Hur, J. W. Jeong, D. M. Sim, K. M. Baek, J. H. Lee, M. J. Kim, and Y. S. Jung, "Eliminating the Trade-Off between the Throughput and Pattern Quality of Sub-15 nm Directed Self-Assembly via Warm Solvent Annealing", Adv. Funct. Mater., 25(2), 306 (2015). https://doi.org/10.1002/adfm.201401529
- J. W. Jeong, S. R. Yang, Y. H. Hur, S. W. Kim, K. M. Baek, S. M. Yim, H.-I. Jang, J. H. Park, S. Y. Lee, and C.-O. Park, "High-resolution nanotransfer printing applicable to diverse surfaces via interface-targeted adhesion switching", Nat. Commun., 5(1), 1 (2014).
- J. W. Jeong, W. I. Park, L. M. Do, J. H. Park, T. H. Kim, G. S. Chae, and Y. S. Jung, "Nanotransfer Printing with sub-10 nm Resolution Realized using Directed Self-Assembly", Adv. Mater., 24(26), 3526 (2012). https://doi.org/10.1002/adma.201200356
- T. W. Park, H. Jung, Y. R. Cho, J. W. Lee, and W. I. Park, "Pattern Formation of Highly Ordered Sub-20 nm Pt Cross-Bar on Ni Thin Film", Korean J. Met. Mater., 56(12), 910 (2018). https://doi.org/10.3365/KJMM.2018.56.12.910
- T. W. Park, Y. J. Choi, and W. I. Park, "Durability of Nano-/micro- Pt Line Patterns Formed on Flexible Substrate", J. Microelectron. Packag. Soc., 25(3), 49 (2018). https://doi.org/10.6117/KMEPS.2018.25.3.049
- T. W. Park, M. H. Byun, H. S. Jung, G. R. Lee, J. H. Park, H.-I. Jang, J. W. Lee, S. H. Kwon, S. B. Hong, J.-H. Lee, Y. S. Jung, K. H. Kim, and W. I. Park, "Thermally assisted nanotransfer printing with sub-20-nm resolution and 8-inch wafer scalability", Sci. Adv., 6(31), eabb6462 (2020). https://doi.org/10.1126/sciadv.abb6462