DOI QR코드

DOI QR Code

유체클러치 터빈 날개의 유형별 유동해석에 대한 융합연구

A Convergent Investigation on Flow Analysis by Type of Turbine Blade of Fluid Clutch

  • 오범석 (공주대학교 기계자동차공학부) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Oh, Bum-Suk (Division of Mechanical & Automotive Engineering, Kongju National University) ;
  • Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
  • 투고 : 2020.01.28
  • 심사 : 2020.03.20
  • 발행 : 2020.03.28

초록

본 연구에서는 8개의 터빈 날개면들이 각각 추진축상에서 45°, 40°, 35°의 각도로 기울어져 있는 Model 1, 2 및 3인 3가지 Model의 유체클러치 터빈 날개 형상에 대한 유동 해석들을 수행하였다. 터빈 날개면이 추진축상에서 각도가 크게 기울어질수록 터빈 날개의 뒷면 이후에서의 흐름에서 Model들 중에서 가장 유동 압력을 크게 받고 있음을 알 수 있다. 반면에 터빈 날개면이 추진축상에서 각도가 작게 기울어질수록 유동 속도가 작게 된다. 터빈 날개면이 추진축상에서 각도가 작게 기울어질수록, 즉 유체의 흐름과 수직에 가까운 날개 형상이 효율적으로 유체클러치에 동력을 연결하고 차단하는데 있어서 적합함을 알 수 있다. 유체클러치 터빈 날개 유형별 유동해석을 적용함으로서 본 논문에서의 연구 결과는 미적인 설계를 적용할 수 있는 융합 연구자료로서 유리하다고 여겨진다.

In this study, the flow analyses were performed on the fluid clutch turbine blade shapes of models 1, 2 and 3, with eight turbine blades tilted at 45 °, 40 °, and 35 ° angles on the propulsion shaft, respectively. The larger the angle of inclination on the propulsion shaft, the higher the flow pressure among the flow models after the back of the turbine blades. On the other hand, the smaller the angle of inclination on the propulsion shaft of the turbine wing, the lower the flow rate. It can be seen that the smaller inclination angle of the turbine blade surface on the propulsion shaft, i.e., the wing shape close to perpendicular to the flow of fluid, is more suitable for efficiently connecting and disconnecting the fluid clutch. By applying the flow analysis by type of turbine blade of fluid clutch,the study result at this paper is considered to be favorable as the convergent research material which can apply the aesthetic design.

키워드

참고문헌

  1. H. C. Lee & J. U. Cho. (2014). A Study on Air Flow Analysis due to the Shape of Automotive Body. Journal of the Korea Convergence Society, 5(2), 19-23. DOI : 10.15207/jkcs.2014.5.2.019
  2. O. B. Suk & J. U. Cho. (2018). A Convergence Study through Flow Analysis due to the Configuration of Automotive Air Breather. Journal of the Korea Convergence Society, 9(10), 265-270. DOI : 10.15207/JKCS.2018.9.10.265
  3. S. H. Jung. (2017). The Control of Spring-Mass-Damper Convergence System using $H{\infty}$ Controller and ${\mu}$-Synthesis Controller. Journal of the Korea Convergence Society, 8(5), 1-11. DOI : 10.15207/JKCS.2017.8.5.001
  4. J. U. Cho, (2015). Study on Convergence Technique through the Flow Analytical Study inside the Faucet for Bathroom. Journal of the Korea Convergence Society, 6(2), 37-42. DOI : 10.15207/JKCS.2015.6.2.037
  5. B. S. Oh & J. U. Cho, (2019). Convergence Study on Durability Analysis of Scooter Seat. Journal of the Korea Convergence Society, 10(6), 165-170. DOI : 10.15207/JKCS.2019.10.6.165
  6. J. H. Lee & J. U. Cho, (2015). Study on Convergence Technique through Flow Analysis at the Flexible Joint of the Pipe Laying. Journal of the Korea Convergence Society, 6(3), 13-18. DOI : 10.15207/JKCS.2015.6.3.013
  7. D. R. Lee. (2015). Flow Analysis of a Thermopneumatic Micropump For Different Shapes of PDMS Membrane. Journal of the Korean Society of Mechanical Technology, 17(2), 245-250. DOI : 10.17958/ksmt.17.2.201504.245
  8. J. U. Cho. (2012). Flow analysis of air due to the shapes of motorbike. Journal of Korean Society of Mechanical Technology, 14(1), 53-60. DOI : 10.17958/ksmt.14.1.201202.53
  9. J. Jeong, S. J. Kwon, B. Chu & J. Park. (2014). Unified-type Design and Structural Analysis for Mecanum Wheel Performance Improvement. Journal of the Korean Society of Manufacturing Process Engineers, 13(2), 117-123. DOI : 10.14775/ksmpe.2014.13.2.117
  10. J. S. Ha & G. M. Lee. (2017). A Study on Structure and Vibration Analysis of an Air Suspension Seat. Journal of the Korean Society of Manufacturing Process Engineers, 16(6), 47-54. DOI : 10.14775/ksmpe.2017.16.6.047
  11. R. D. Gyeom & L. K. Bock. (2019). Flow Characteristics and Wind Loads on the Solar Panel and Floating System of Floating Solar Generato. Journal of the Korea Academia-Industrial Cooperation Society, 20(10), 229-235. DOI : 10.5762/KAIS.2019.20.10.229
  12. D. W. Jeong, Y. S. Won & S. H. Kang. (2019). Comparison Study on Aerodynamic Performance and Wake Flow Field for a MW-Class Wind Turbine Model. Journal of the Korean Society of Visualization, 17(2), 32-38. DOI : 10.5407/jksv.2019.17.2.032
  13. J. S. Lim. (2019). A Design of Small Size Sensor Data Acquisition and Transmission System. Journal of Convergence for Information Technology, 9(1), 136-141. https://doi.org/10.22156/CS4SMB.2019.9.1.136
  14. J. H. Ku. (2017). A Study on the Platform for Big Data Analysis of Manufacturing Process. Journal of Convergence for Information Technology, 7(5), 177-182. https://doi.org/10.22156/CS4SMB.2017.7.5.177
  15. K. S. Ahn, J. G. Oh, T. H. Yang & G. T. Yeo. (2019). An analysis of the Factors of Moving in and Activation Strategies for Incheon Cold-Chain Cluster using LNG cold energy. Journal of Digital Convergence, 17(2), 101-111. DOI : 10.14400/JDC.2019.17.2.101
  16. S. Y. Min & S. I. Kim. (2018). Study on Improvement of tap water drinking rate of Seoul city Tap water 'Arisu' through usage and recognition analysis. Journal of Digital Convergence, 16(9), 399-404. DOI : 10.14400/JDC.2018.16.9.399