References
- ASME BPVC Sec. III, 2013, "Rules for Construction of Nuclear Power Plant Components", American Society of Mechanical Engineers, NY.
- Lee, C. H., 1991, "Allowable Tube Wall Degradation Analysis", Cal No. 10287-SS-902, ABB Combustion Engineering Nuclear Power.
- SGMP: Steam Generator Integrity Assessment Guidelines: Revision 4. EPRI, Palo Alto, CA:2016. 3002007571.
- NEI 97-06, 2001, "Steam Generator Program Guidelines, Revision 1", Nuclear Energy Institute.
- Fuller, E., Cipolla, R. C., Reinhardt, W. D., Zhao, Z. F., Begley, J. A., Costa, D. E., Ayres, D. J., Keating, R.F. and Lagally, H.O., "Impacts of the Structural Integrity Performance Criterion on Steam Generator Tube Integrity Evaluations", EPRI, Palo Alto, CA:2004. 1009541.
- Reg. Guide 1.121, 1976, "Bases for Plugging Degraded PWR Steam Generator Tubes", U.S. Nuclear Regulatory Commission, Washington, D.C.
- Krzywosez, K., "Balance-of-Plant Heat Exchanger Condition Assessment and Inspection Guide", EPRI, Charlotte, NC:1999. TR-108009, pp. 7-1.
- ASME BPVC Sec. XI, 2015, "Rules for Inservice Inspection of Nuclear Power Plant Components", American Society of Mechanical Engineers, NY.
- KHNP, 2011, Integrated Technical Specifications Kori Units 3,4 Revision 452, "4.19 Steam Generator Program", pp. 4.0-21.
- KHNP, 2011, Integrated Technical Specifications Hanbit Units 5,6 Revision 154, "4.19 Steam Generator Program", pp. 4.0-21.
- EPRI SGMP Website : www.epri.com
- USNRC Generic Letter 95-05, 1995, "Voltage-Based Repair Criteria for Westinghouse Steam Generator Tubes Affected by Outside Diameter Stress Corrosion Cracking", U.S. Nuclear Regulatory Commission, Washington, D.C.
- Cothron, H., Steam Generator Tubing Diameter Stress Corrosion Cracking at Tube Support Plates Database for Alternate Repair Limits: Addendum 7, EPRI, Palo Alto, CA: 2008. 1018047.
- Smith, J. D., 2008, "Sequoyah Nuclear Plant (SQN)-Unit2-2Cycle 15(U2C15) 90-day Steam Generator (SG) Report for Voltage-Based Alternate Repair Criteria(ARC) and W* Alternate Repair Criteria", US ADAMS Accession No. ML 082480690.
- Srikantiah, G., Pitterle, T. A., Keating, R. F. and Srinivas. V., 1998, "Steam Generator Tubing Outside Diameter Stress Corrosion Cracking at Tube Support Plates Database for Alternate Repair Limits", NP 7480-L, EPRI, Palo Alto.
- Blandford, E., Pitterle, T. and Keating, R., 2005, "Steam Generator Tubing Outside Diameter Stress Corrosion Cracking at Tube Support Plates Database for Alternate Repair Limits: Update 2004", EPRI, Palo Alto, CA:2005. 1011456.
- EPRI, 1994, Steam Generator Reference Book Vol. I, TR-103824a-V1R1, pp. 8-2-8-4.
- Pitterle, T. A., Keating R. F., Pierini, G. P., Malinowski, D. D., Cullen, W. K., Lilly, G. P., Sagar, A., Pierini, G. P., Begley, J. A. and Arhar, J. H., 2001, "Depth-Based SG Tube Repair Criteria for Axial PWSCC at Dented TSP Intersections-Alternate Burst Pressure Calculation", Westinghouse Electric Company LLC, PA, WCAP-15574 Revision 1, pp. 2-1-2-10.
- USNRC GL 2004-1, 2004, "Requirements for Steam Generator Tube Inspections", US ADAMS Accession No. ML042370766.
- Cassino, C. D., Lagally H. O., Whiteman, G. W., 2009, "H*: Alternate Repair Criteria for the Tubesheet Expansion Region in Steam Generators with Hydraulic Expanded Tubes(Model F)", Westinghouse Electric Company LLC, PA, WCAP-17071-NP Revision 0, US ADAMS Accession No. ML093620086.
- Magee, T. P., Nelson, P. R., Bell, B. A. and Coe, K. E., 2005, "NDE Inspection Length for CE Steam Generator Tubesheet Region Explosive Expansions", Westinghouse Electric Company LLC, PA, WCAP-16208-NP Revision 1, US ADAMS Accession No. 051520417.
- USNRC, 2012, "Catawba Nuclear Station Unit 1 and 2, Issuance of Amendments Regrading Technical Specifications Amendments for Permanent Alternate Repair Criteria for Steam Generator Tubes(TAC NOS. ME6670 and ME6671)", US ADAMS Accession No. 12054A692.
- C. B. Bahn, S. Majumdar, K. E. Kasza, and W. J. Shack, "Leak Behaviors of Steam Generator Tube-to-Tubesheet Joints from Room Temperature to 320℃", Int. J. Pressure Vessels Piping, 101 (2013) 45-54. https://doi.org/10.1016/j.ijpvp.2012.10.003
- C. B. Bahn, S. Majumdar, K. E. Kasza, and W. J. Shack, "Leak Behavior of Steam Generator Tube-to-Tubesheet Joints under Creep Condition: Experimental Study", Int. J. Pressure Vessels Piping, 101 (2013) 55-63. https://doi.org/10.1016/j.ijpvp.2012.10.002