DOI QR코드

DOI QR Code

Operation Characteristics According to Steam Temperature and Effectivenss of External Steam-Related SOEC System

외부 수증기 연계 SOEC 시스템의 공급 스팀 온도 및 열교환기 유용도에 따른 시스템 BOP 및 운전 특성 분석

  • KIM, YOUNG SANG (Department of Clean Fuel and Power Generation, Korea Institute of Machinery & Materials (KIMM)) ;
  • LEE, YOUNG DUK (Department of Clean Fuel and Power Generation, Korea Institute of Machinery & Materials (KIMM)) ;
  • AHN, KOOK YOUNG (Department of Clean Fuel and Power Generation, Korea Institute of Machinery & Materials (KIMM)) ;
  • LEE, DONG KEUN (Department of Clean Fuel and Power Generation, Korea Institute of Machinery & Materials (KIMM)) ;
  • LEE, SANG MIN (Department of Clean Fuel and Power Generation, Korea Institute of Machinery & Materials (KIMM)) ;
  • CHOI, EUN JUNG (Department of Clean Fuel and Power Generation, Korea Institute of Machinery & Materials (KIMM))
  • 김영상 (한국기계연구원 청정연료발전연구실) ;
  • 이영덕 (한국기계연구원 청정연료발전연구실) ;
  • 안국영 (한국기계연구원 청정연료발전연구실) ;
  • 이동근 (한국기계연구원 청정연료발전연구실) ;
  • 이상민 (한국기계연구원 청정연료발전연구실) ;
  • 최은정 (한국기계연구원 청정연료발전연구실)
  • Received : 2020.10.21
  • Accepted : 2020.12.30
  • Published : 2020.12.30

Abstract

Solid oxide electrolysis cell (SOEC) attracts much attention because of its high energy efficiency among many water-electrolysis technologies. SOEC operates at temperatures above 700℃, so that the water required for water-electrolysis must be supplied in the form of steam. When the steam to be supplied to the SOEC is generated by the SOEC system itself, an enormous amount of latent heat is required to vaporize the water, so additional energy must be supplied to the SOEC system. On the other hand, if the steam can be supplied from the outside, a small amount of energy is required to raise the temperature of the low temperature steam, so that the SOEC system can be operated without additional energy supply from outside, which enables efficient water-electrolysis. In this study, we figure out the size of heat exchanger for various steam temperature and effectiveness of heat exchanger, and propose the energy efficiency of the system.

Keywords

References

  1. T. W. Brown, T. Bischof-Niemz, K. Blok, C. Breyer, H. Lund, and B.V. Mathiesen, "Response to 'burden of proof: a comprehensive review of the feasibility of 100% renewable-electricity systems", Renewable and Sustainable Energy Reviews, Vol. 92, 2018, pp. 834-847, doi: https://doi.org/10.1016/j.rser.2018.04.113.
  2. C. Lamy, "From hydrogen production by water electrolysis to its utilization in a PEM fuel cell or in a SO fuel cell: some considerations on the energy efficiencies", Int. J. Hydrogen Energy, Vol. 41, No. 34, 2016, pp. 15415-15425, doi: https://doi.org/10.1016/j.ijhydene.2016.04.173.
  3. T. M. I. Mahlia, T. J. Saktisahdan, A. Jannifar, M.H. Hasan, and H. S. C. Matseelar, "A review of available methods and development on energy storage; technology update", Renewable and Sustainable Energy Reviews, Vol. 33, 2014, pp. 532-545, doi: https://doi.org/10.1016/j.rser.2014.01.068.
  4. P. Kim-Lohsoontorn, D. J. L. Brett, N. Laosiripojana, Y. M. Kim, and J. M. Bae, "Performance of solid oxide electrolysis cells based on composite La0.8Sr0.2MnO3-δ - yttria stabilized zirconia and Ba0.5Sr0.5Co0.8Fe0.2O3-δ oxygen electrodes", Int. J. Hydrogen Energy, Vol. 35, No. 9, 2010, pp. 3958-3966, doi: https://doi.org/10.1016/j.ijhydene.2010.02.039.
  5. V. T. Giap, S, Kang, and K. Y. Ahn, "HIGH-EFFICIENT reversible solid oxide fuel cell coupled with waste steam for distributed electrical energy storage system", Renewable Energy, Vol. 144, 2019, pp. 129-138, doi: https://doi.org/10. 1016/j.renene.2018.10.112. https://doi.org/10.1016/j.renene.2018.10.112
  6. V. T. Giap, Y. D. Lee, Y. S. Kim, and K. Y. Ahn, "Technoeconomic analysis of reversible solid oxide fuel cell system couple with waste steam", Trans Korean Hydrogen New Energy Soc, Vol. 30, No. 1, 2019, pp. 21-28, doi: https://doi.org/10.7316/KHNES.2019.30.1.21.
  7. V. T. Giap, Y. D. Lee, Y. S. Kim, T. Q. Quach, and K. Y. Ahn, "Optimal design of RSOFC system coupled with waste steam using ejector for fuel recirculation", Trans Korean Hydrogen New Energy Soc, Vol. 30, No. 4, 2019, pp. 303-311, doi: https://doi.org/10.7316/KHNES.2019.30.4.303.
  8. V. T. Giap, Y. D. Lee, Y. S. Kim, and K. Y. Ahn, "A novel electrical energy storage system based on a reversible solid oxide fuel cell coupled with metal hydrides and waste steam", Applied Energy, Vol. 262, 2020, pp. 114522, doi: https://doi.org/10.1016/j.apenergy.2020.114522.
  9. V. T. Giap, Y. S. Kim, Y. D. Lee, and K. Y. Ahn, "Waste heat utilization in reversible solid oxide fuel cell systems for electrical energy storage: fuel recirculation design and feasibility analysis", Journal of Energy Storage, Vol. 29, 2020, pp. 101434, doi: https://doi.org/10.1016/j.est.2020.101434.
  10. S. H. Jensen, P. H. Larsen, and M. Mogensen, "Hydrogen and synthetic fuel production from renewable energy sources", Int. J. Hydrogen Energy, Vol. 32, No. 15, 2007, pp. 3253-3257, doi: https://doi.org/10.1016/j.ijhydene.2007.04.042.