DOI QR코드

DOI QR Code

Simple P-I diagram for structural components based on support rotation angle criteria

  • Kee, Jung Hun (Department of Safety Engineering, Seoul National University of Science and Technology) ;
  • Park, Jong Yil (Department of Safety Engineering, Seoul National University of Science and Technology)
  • 투고 : 2020.09.02
  • 심사 : 2020.10.21
  • 발행 : 2020.12.25

초록

In the preliminary design phase of explosion-proof structures, the use of P-I diagram is useful. Based on the fact that the deformation criteria at failure or heavy damage is significantly larger than the yield deformation, a closed form solution of normalized P-I diagram is proposed using the complete plastic resistance curve. When actual sizes and material properties of RC structural component are considered, the complete plasticity assumption shows only a maximum error of 6% in terms of strain energy, and a maximum difference of 9% of the amount of explosives in CWSD. Thru comparison with four field test results, the same damage pattern was predicted in all four specimens.

키워드

참고문헌

  1. Al-Thairy, H. (2016), "A modified single degree of freedom method for the analysis of building steel columns subjected to explosion induced blast load", Int. J. Impact Eng., 94, 120-133. https://doi.org/10.1016/j.ijimpeng.2016.04.007.
  2. Dragos, J. and Wu, C. (2013), "A new general approach to derive normalised pressure impulse curves", Int. J. Impact Eng., 62, 1-12. https://doi.org/10.1016/j.ijimpeng.2013.05.005.
  3. Edri, I.E. and Yankelevsky, D.Z. (2018), "Analytical model for the dynamic response of blast-loaded arching masonry walls", Eng. Struct., 176, 49-63. https://doi.org/10.1016/j.engstruct.2018.08.053.
  4. Ellefsen, R. and Fordyce, D. (2012), "Urban terrain building types: Public releasable bersion", No. ARL-TR-4395A, Army Research Lab Aberdeen Proving Ground MD SurvivabilityLethality Analysis Directorate.
  5. Fallah, A.S. and Louca, L.A. (2007), "Pressure-impulse diagrams for elastic-plastic-hardening and softening single-degree-offreedom models subjected to blast loading", Int. J. Impact Eng., 34(4), 823-842. https://doi.org/10.1016/j.ijimpeng.2006.01.007.
  6. Hong, J., Fang, Q., Chen, L. and Kong, X. (2017), "Numerical predictions of concrete slabs under contact explosion by modified K&C material model", Constr. Build. Mater., 155, 1013-1024. https://doi.org/10.1016/j.conbuildmat.2017.08.060.
  7. Hou, X., Cao, S., Rong, Q. and Zheng, W. (2018), "A PI diagram approach for predicting failure modes of RPC one-way slabs subjected to blast loading", Int. J. Impact Eng., 120, 171-184. https://doi.org/10.1016/j.ijimpeng.2018.06.006.
  8. Kee, J.H., Park, J.Y. and Seong, J.H. (2019), "Effect of one way reinforced concrete slab characteristics on structural response under blast loading", Adv. Concrete Constr., 8(4), 277-283. https://doi.org/10.12989/acc.2019.8.4.277.
  9. Kingery, C.N. and Bulmash, G. (1984), "Airblast parameters from TNT spherical air burst and hemispherical surface burst", US Army Armament and Development Center, Ballistic Research Laboratory.
  10. Krauthammer, T., Astarlioglu, S., Blasko, J., Soh, T.B. and Ng, P.H. (2008), "Pressure-impulse diagrams for the behavior assessment of structural components", Int. J. Impact Eng., 35(8), 771-783. https://doi.org/10.1016/j.ijimpeng.2007.12.004.
  11. Lee, S.J., Park, J.Y., Lee, Y.H. and Kim, H.S. (2017), "Experimental analysis on the criteria of the explosion damage for one-way RC slabs", J. Korean Soc. Saf., 32(6), 68-74. https://doi.org/10.14346/JKOSOS.2017.32.6.68.
  12. Li, Q.M. and Meng, H. (2002), "Pressure-impulse diagram for blast loads based on dimensional analysis and single-degree-offreedom model", J. Eng. Mech., 128(1), 87-92. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:1(87).
  13. Li, Q.M. and Meng, H. (2002), "Pulse loading shape effects on pressure-impulse diagram of an elastic-plastic, single-degreeof-freedom structural model", Int. J. Mech. Sci., 44(9), 1985-1998. https://doi.org/10.1016/S0020-7403(02)00046-2.
  14. Liu, Y., Yan, J., Li, Z. and Huang, F. (2019), "Improved SDOF and numerical approach to study the dynamic response of reinforced concrete columns subjected to close-in blast loading", Struct., 22, 341-365. https://doi.org/10.1016/j.istruc.2019.08.014.
  15. Nagata, M., Beppu, M., Ichino, H. and Takahashi, J. (2018), "Method for evaluating the displacement response of RC beams subjected to close-in explosion using modified SDOF model", Eng. Struct., 157, 105-118. https://doi.org/10.1016/j.engstruct.2017.11.067.
  16. Park, J.Y., Kim, M.S., Scanlon, A., Choi, H. and Lee, Y.H. (2014), "Residual strength of reinforced concrete columns subjected to blast loading", Mag. Concrete Res., 66(2), 60-71. https://doi.org/10.1680/macr.13.00117.
  17. PDC-TR-06-08 (2008), Single Degree of Freedom Structural Response Limits for Antiterrorism Design, US Army Corps of Engineers, USA.
  18. Sevim, B. and Toy, A.T. (2020), "Structural response of concrete gravity dams under blast loads", Adv. Concrete Constr., 9(5), 503-510. https://doi.org/10.12989/acc.2020.9.5.503.
  19. Toy, A.T. and Sevim, B. (2017), "Numerically and empirically determination of blasting response of a RC retaining wall under TNT explosive", Adv. Concrete Constr., 5(5), 493. http://dx.doi.org/10.12989/acc.2017.5.5.493.
  20. UFC 3-340-02 (2008), Structures to Resist the Effects of Accidental Explosions, US DoD, Washington, DC, USA.
  21. Wang, W., Zhang, D., Lu, F. and Liu, R. (2013), "A new SDOF method of one-way reinforced concrete slab under non-uniform blast loading", Struct. Eng. Mech., 46(5), 595-613. https://doi.org/10.12989/SEM.2013.46.5.595.
  22. Yu, R., Zhang, D., Chen, L. and Yan, H. (2018), "Nondimensional pressure-impulse diagrams for blast-loaded reinforced concrete beam columns referred to different failure modes", Adv. Struct. Eng., 21(14), 2114-2129. https://doi.org/10.1177/1369433218768085.