DOI QR코드

DOI QR Code

Concrete strength monitoring based on the variation of ultrasonic waveform acquired by piezoelectric aggregates

  • Wei, Li (School of Mechanics and Materials, Hohai University) ;
  • Wang, Zijian (Key Laboratory of C&PC Structures, Ministry of Education, Southeast University) ;
  • Cao, Maosen (School of Mechanics and Materials, Hohai University) ;
  • Fu, Ronghua (School of Mechanics and Materials, Hohai University)
  • 투고 : 2019.12.11
  • 심사 : 2020.08.01
  • 발행 : 2020.12.10

초록

Ultrasonic waves provide a non-destructive and sensitive way to monitor the concrete hydration. However, limited works are reported to monitor the evolution of the mechanical parameter at early ages. In this study, modified piezoelectric aggregates are embedded inside a concrete beam to excite and receive primary waves. A hydration index, namely, the variation of ultrasonic waveform (VUW) is developed to characterize the variation of the transmitted waves during the hydration process. The recorded hydration indices are compared with the compressive strength measured by destructive test at different ages. The results show that the VUW is closer to the compressive strength than the other two traditional hydration indices, ultrasonic velocity and wave packet energy. The proposed VUW provides a simple and accurate way to monitor the concrete hydration at early ages.

키워드

과제정보

This research was funded by the National Key Research and Development Program of China (2019YFC1511103, 2018YFC0406706), the National Natural Science Foundation of China (51609148), the Nanjing Hydraulic Research Institute (Y719007) and the Fundamental Research Funds for the Central Universities (2242020R10028).

참고문헌

  1. Byun, Y.H., Han, W., Tutumluer, E. and Lee, J.S. (2016), "Elastic wave characterization of controlled low-strength material using embedded piezoelectric transducers", Construct. Build. Mater., 127, 210-219, https://doi.org/10.1016/j.conbuildmat.2016.09.113.
  2. Carette, J., and Staquet, S. (2016), "Monitoring the setting process of eco-binders by ultrasonic P-wave and S-wave transmission velocity measurement: Mortar vs concrete", Construct. Build. Mater., 110, 32-41, https://doi.org/10.1016/j.conbuildmat.2016.02.019.
  3. Deraemaeker, A. and Dumoulin, C. (2019), "Embedding ultrasonic transducers in concrete: A lifelong monitoring technology", Construct. Build. Mater., 194, 42-50, https://doi.org/10.1016/j.conbuildmat.2018.11.013.
  4. Feng, Q., Liang, Y.B., and Song, G.B. (2019), "Real-Time Monitoring of Early-Age Concrete Strength Using Piezoceramic-Based Smart Aggregates", J. Aerosp. Eng., 32(1), 6, https://doi.org/10.1061/(asce)as.1943-5525.0000939.
  5. Gao, W., Li, H. and Ho, S. (2019), "A Novel Embeddable Tubular Piezoceramics-Based Smart Aggregate for Damage Detection in Two-Dimensional Concrete Structures", Sensors, 19(7), 1501, https://doi.org/10.3390/s19071501.
  6. Gu, H., Song, G., Dhonde, H., Mo, Y.L. and Yan, S. (2006), "Concrete early-age strength monitoring using embedded piezoelectric transducers", Smart Mater. Struct., 15(6), 1837-1845. https://doi.org/10.1088/0964-1726/15/6/038.
  7. Janapati, V., Kopsaftopoulos, F., Li, F., Lee, S.J. and Chang, F.K. (2016), "Damage detection sensitivity characterization of acousto-ultrasound-based structural health monitoring techniques", Struct. Health. Monitor, 15(2), 143-161, https://doi.org/10.1177/1475921715627490.
  8. Kim, J.H., Shah, S.P., Sun, Z.H., and Kwak, H.G. (2009), "Ultrasonic Wave Reflection and Resonant Frequency Measurements for Monitoring Early-Age Concrete", J. Mater. Civil Eng., 21(9), 476-483. https://doi.org/10.1061/(asce)0899-1561(2009)21:9(476).
  9. Kong, Q., Fan, S., Bai, X., Mo, Y.L. and Song, G. (2017), "A novel embeddable spherical smart aggregate for structural health monitoring: Part I. Fabrication and electrical characterization", Smart Mater. Struct., 26(9), 095050, https://doi.org/10.1088/1361-665X/aa80bc.
  10. Kong, Q., Fan, S., Mo, Y.L. and Song, G. (2017), "A novel embeddable spherical smart aggregate for structural health monitoring: Part II. Numerical and experimental verifications", Smart Mater. Struct., 26(9), 095051, https://doi.org/10.1088/1361-665X/aa80ef.
  11. Kong, Q.Z., Hou, S., Ji, Q., Mo, Y.L. and Song, G.B. (2013), "Very early age concrete hydration characterization monitoring using piezoceramic based smart aggregates", Smart Mater. Struct., 22(8), 7, https://doi.org/10.1088/0964-1726/22/8/085025.
  12. Liu, Y., Zhang, M., Yin, X., Huang, Z. and Wang, L. (2020), "Debonding detection of reinforced concrete (RC) beam with near-surface mounted (NSM) pre-stressed carbon fiber reinforced polymer (CFRP) plates using embedded piezoceramic smart aggregates (SAs)", Appl. Sci., 10(1), 50, https://doi.org/10.3390/app10010050.
  13. Lu, Y.Y., Ma, H.Y., and Li, Z.J. (2015), "Ultrasonic monitoring of the early-age hydration of mineral admixtures incorporated concrete using cement-based piezoelectric composite sensors", J. Intelligent Mater. Syst. Struct., 26(3), 280-291, https://doi.org/10.1177/1045389x14525488.
  14. Oh, T., Kim, J., Zhang, A., Lee, C. and Park, S. (2016), "Concrete strength evaluation in an early-age curing process using SVM with ultrasonic harmonic waves", Insight, 58(11), 609-616, https://doi.org/10.1784/insi.2016.58.11.609.
  15. Popovics, J.S., and Subramaniam, K.V.L. (2015), "Review of Ultrasonic Wave Reflection Applied to Early-Age Concrete and Cementitious Materials", J. Nondestructive Evaluation, 34(1), 12, https://doi.org/10.1007/s10921-014-0267-3.
  16. Porco, F., Uva, G., Fiore, A. and Mezzina, M. (2014), "Assessment of concrete degradation in existing structures: a practical procedure", Struct. Eng. Mech., 52(4), 701-721, https://doi.org/10.12989/sem.2014.52.4.701.
  17. Qin, L., and Li, Z.J. (2008), "Monitoring of cement hydration using embedded piezoelectric transducers", Smart Mater. Struct., 17(5), 6, https://doi.org/10.1088/0964-1726/17/5/055005.
  18. Qin, L., Wang, J., Liu, D., Tang, L. and Song, G. (2019), "Analysis on an improved resistance tuning type multi-frequency piezoelectric spherical transducer", Smart Struct. Syst., 24(4), 435-446, https://doi.org/10.12989/sss.2019.24.4.435.
  19. Sajid, S.H., Ali, S.M., Carino, N.J., Saeed, S., Sajid, H.U. and Chouinard, L. (2018), "Strength estimation of concrete masonry units using stress-wave methods", Construct. Build. Mater., 163, 518-528, ttps://doi.org/10.1016/j.conbuildmat.2017.12.044.
  20. Saleem, M. (2017), "Study to detect bond degradation in reinforced concrete beams using ultrasonic pulse velocity test method", Struct. Eng. Mech., 64(4), 427-436, https://doi.org/10.12989/sem.2017.64.4.427.
  21. Saleem, M. (2018), "Evaluating the pull-out load capacity of steel bolt using Schmidt hammer and ultrasonic pulse velocity test", Struct. Eng. Mech., 65(5), 601-609, https://doi.org/10.12989/sem.2018.65.5.601.
  22. Shin, S.W., Yun, C.B., Popovics, J.S. and Kim, J.H. (2007), "Improved Rayleigh wave velocity measurement for nondestructive early-age concrete monitoring", Res. Nondestructive Evaluation, 18(1), 45-68, https://doi.org/10.1080/09349840601128762.
  23. Silva, P. and Mo, Y. (2016), "Cyclic crack monitoring of a reinforced concrete column under simulated pseudo-dynamic loading using piezoceramic-based smart aggregates", Appl. Sci., 6(11), 341, https://doi.org/10.3390/app6110341.
  24. Song, G.B., Gu, H.C. and Mo, Y.L. (2008), "Smart aggregates: multi-functional sensors for concrete structures: A tutorial and a review", Smart Mater. Struct., 17(3), 033001, https://doi.org/10.1088/0964-1726/17/3/033001.
  25. Trtnik, G. and Gams, M. (2015), "Ultrasonic assessment of initial compressive strength gain of cement based materials", Cement Concrete Res., 67, 148-155, https://doi.org/10.1016/j.cemconres.2014.10.005.
  26. Trtnik, G., Valic, M.L., Kavcic, F. and Turk, G. (2009), "Comparison between two ultrasonic methods in their ability to monitor the setting process of cement pastes", Cement Concrete Res., 39(10), 876-882, https://doi.org/10.1016/j.cemconres.2009.07.002.
  27. Tsioulou, O., Lampropoulos, A. and Paschalis, S. (2017), "Combined Non-Destructive Testing (NDT) method for the evaluation of the mechanical characteristics of Ultra High Performance Fibre Reinforced Concrete (UHPFRC)", Construct. Build. Mater., 131, 66-77, https://doi.org/10.1016/j.conbuildmat.2016.11.068.
  28. Voigt, T., Akkaya, Y., and Shah, S.P. (2003), "Determination of early age mortar and concrete strength by ultrasonic wave reflections", J. Mater. Civil Eng., 15(3), 247-254, https://doi.org/10.1061/(asce)0899-1561(2003)15:3(247).
  29. Wang, Z.J., Wei, L. and Cao, M.S. (2019), "Damage Quantification with Embedded Piezoelectric Aggregates Based on Wavelet Packet Energy Analysis", Sensors, 19(2), 20, https://doi.org/10.3390/s19020425.
  30. Xu, K., Deng, Q., Cai, L., Ho, S. and Song, G. (2018), "Damage detection of a concrete column subject to blast loads using embedded piezoceramic transducers", Sensors, 18(5), 1377, https://doi.org/10.3390/s18051377.
  31. Yan, S., Ma, H., Li, P., Song, G. and Wu, J. (2017), "Development and application of a structural health monitoring system based on wireless smart aggregates", Sensors, 17(7), 1641, https://doi.org/10.3390/s17071641.
  32. Yim, H.J., Kim, J.H., and Shah, S.P. (2014), "Ultrasonic monitoring of the setting of cement-based materials: Frequency dependence", Construct. Build. Mater., 65, 518-525, https://doi.org/10.1016/j.conbuildmat.2014.04.128.
  33. Yoon, H., Kim, Y.J., Kim, H.S., Kang, J.W. and Koh, H.M. (2017), "Evaluation of Early-Age Concrete Compressive Strength with Ultrasonic Sensors", Sensors, 17(8), 15, https://doi.org/10.3390/s17081817.
  34. Zhou, L., Zheng, Y., Song, G., Chen, D. and Ye, Y. (2019), "Identification of the structural damage mechanism of BFRP bars reinforced concrete beams using smart transducers based on time reversal method", Construct. Build. Mater., 220, 615-627, https://doi.org/10.1016/j.conbuildmat.2019.06.056.