References
- P. Garrou, C. Bower, and P. Ramm, Handbook of 3d integration: Volume 1‐technology and applications of 3D integrated circuits, John Wiley & Sons, Hoboken, NJ, 2011, pp.13-24.
- T. Nonaka et al., High throughput thermal compression NCF bonding, in Electron. Compon. Technol. Conf. (ECTC), Orlando, FL, USA, May 2014, pp. 913-918.
- K. Matsumura et al., New non conductive film for high productivity process, in IEEE CPMT Symp. Japan (ICSJ), Kyoto, Japan, Nov. 2015, pp. 19-20.
- H. G. Lee et al., Effects of thermocompression bonding parameters on Cu Pillar/Sn‐Ag microbump solder joint morphology using nonconductive films, IEEE Trans. Compon. Packag. Manuf. Technol. 7 (2017), 450-455. https://doi.org/10.1109/TCPMT.2016.2641040
- A. Tong and F. Qin, Effects of the intermetallic compound microstructure on the tensile behavior of Sn3.0Ag0.5Cu/Cu solder joint under various strain rates, Microelectron. Reliab. 54 (2014), 932-938. https://doi.org/10.1016/j.microrel.2014.01.008
- N. Asahi et al., High productivity thermal compression bonding for 3D‐IC, in IEEE 3D Syst. Integr. Conf. (3DIC), Sendai, Japan, 2015, pp. TS7.3:1-5.
- N. Asahi, 3D‐IC thermo‐compression collective bonding process using high temperature stage, in IEEE Int. Conf. in Electron. Packag. (ICEP), Yamagata, Japan, Apr. 2017, pp. 536-529.
- A. B. Lim et al., High throughput thermo‐compression bonding with pre‐applied underfill for 3D memory applications, in IEEE Electron. Packag. Technol. Conf. (EPTC), Singapore, 2016, pp. 427-434.
- Y. G. Jung et al., Development of next generation flip chip interconnection technology using homogenized laser‐assisted bonding, in IEEE Electron. Comp. Technol. Conf. (ECTC), Las Vegas, NV, USA, 2016, pp. 88-94.
- C. H. Kim et al., Development of extremely thin profile flip chip CSP using laser assisted bonding technology, in IEEE CPMT Symp. Japan (ICSJ), Kyoto, Japan, 2017, pp. 45-49.
- K.‐S. Choi et al., Development of stacking process for 3D TSV (through silicon via) structure using laser, in Int. Symp. Microelectron. Assembly Packaging soc. (IMAPS), Raleigh, NC, USA, Oct. 9 -12, 2017, pp. 67-71
- Y.‐S. Eom et al., Characterization of fluxing and hybrid underfills with micro‐encapsulated catalyst for long pot life, ETRI J. 36 (2014), no. 3, 343-351. https://doi.org/10.4218/etrij.14.0113.0570
- C. Tams and C. Enjalbert. The use of UV/Vis/NIR spectroscopy in the development of photovoltaic cells, PerkinElmer Resources, Feb. 18, 2018, available at https://www.perkinelmer.com/lab-solutions/resources/docs/APP_UseofUVVisNIRinDevelopmentPV.pdf.
- F. Padera. Measuring absorptance (k) and refractive index (n) of thin films with the PerkinElmer LAMBDA 950/1050 high performance UV/Vis/NIR spectrometers, Feb. 18, 2018, available at https://www.perkinelmer.com/lab-solutions/resources/docs/APP_Thin-films.pdf.
- J. Piprek, Heat generation and dissipation, Semiconductor optoelectronic devices: Introduction to physics and simulation, Elsevier, San Diego, CA, 2013, pp. 145-147.
- J. Piprek, Dielectric function, Semiconductor optoelectronic devices: Introduction to physics and simulation, Elsevier, San Diego, CA, 2013, pp. 87-91.
- W. Frei, Modeling laser‐material interactions with the Beer‐Lambert Law, COMSOL BLOG, 2016, Dec. 21, 2017, available at https://br.comsol.com/blogs/modeling-laser-material-interactions-with-the-beer-lambert-law/.
- M. A. Green and M. J. Keevers, Optical properties of intrinsic silicon at 300 K, Prog. Photovoltaics 3 (1995), no. 3, 189-192. https://doi.org/10.1002/pip.4670030303
- K. Rajkanan, R. Singh, and J. Shewchun, Absorption coefficient of silicon for solar cell calculations, Solid‐State Electron. 22 (1979), no. 9, 793-795. https://doi.org/10.1016/0038-1101(79)90128-X
- W. A. Braganca, Properties of NCP with different silica filler for 3D TSV multi‐stack integration, Master Dissertation, University of Science and Technology, 2017.
- N. Zhao et al., Growth kinetics of Cu6Sn5 intermetallic compound at liquid‐solid interfaces in Cu/Sn/Cu interconnects under temperature gradient, Sci. Rep. 5 (2015), 1-5.