한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제18권9호
  • /
  • Pages.81-87
  • /
  • 2019
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

볼기어캠의 4-축 가공에 관한 연구

Study of 4-Axis Machining for Ball Gear Cam

  • 조현덕 (경일대학교 기계자동차학부) ;
  • 신용범 (대영코어텍(주) 우수기술연구센터)
  • 투고 : 2019.05.31
  • 심사 : 2019.06.28
  • 발행 : 2019.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The automatic tool changer of a machining center consists of a tool magazine and a cam box, and the core components of the cam box are a roller gear cam and a turret. Recently, the roller gear cam of a cam box has been replaced by a ball gear cam. In this study, the design and machining method of ball gear cam for an automatic tool changer was studied. Additionally, an algorithm for a 4-axis post processing method was established from an instrumental formula by designing a ball gear cam, thus preventing machining at the bottom of ball end mill and enabling the ball on the turret to be driven at the entrance and exit of a curve without collision due to machining errors. In conclusion, machining using only the 4-axis method including the C-axis on a BC -Type 5-axis machine produced the desired ball gear cam.

키워드

참고문헌

  1. Cho, H. D., Park, J. B., Shin, Y. B., Lee, Y. C., Lee, G. S., "A Study on 4-Axis Machining of Ball Gear Cam", Proceeding of the KSMPE Autumn Conference, pp. 46-46, 2018.
  2. Cho, H. D., Yoon, M. C. and Kim, K. J. "5-Axis CNC Machining of Roller Gear Cam", Transaction of the Korean Society of Machine Tool Engineers, Vol. 19, No. 6, pp. 739-745, 2010.
  3. Cho, H. D., Park, J. B., Shin, Y. B., Lee, K. S., "A Study on 5-Axis Machining of Roller Gear Cam for Rotary Table", Journal of the Korean Society of Manu facturing Process Engineers, Vol. 16, No. 4 pp.127-134, 2017. https://doi.org/10.14775/ksmpe.2017.16.4.127
  4. Yan, H. S., Chen, H. H., "Geometry design and machi ning of roller gear cams with cylindrical rollers", Mec hanism and Machine Theory, Vol. 29, Issue 6, pp.803-812, 1994. https://doi.org/10.1016/0094-114X(94)90079-5
  5. Kim, J. S., Kang, S. K. and Lee, D. S., "A Study on the Machining Characteristics of Prototype of Roll er Gear Cam", Journal of the Korean Society of Manu facturing Process Engineers, Vol. 11, No. 5, pp.60-67, 2012.
  6. Jung, Y. H., Lee, D. W., Kim, J. S., Mok, H. S., "NC post-processor for 5-axis milling machine of table-rot ating/tilting type", Journal of Materials Processing Technology, Vol. 130, No. 20, pp.641-646, 2002. https://doi.org/10.1016/S0924-0136(02)00725-2

피인용 문헌

  1. 볼기어캠의 5-축 가공에 관한 연구 vol.19, pp.12, 2020, https://doi.org/10.14775/ksmpe.2020.19.12.098