DOI QR코드

DOI QR Code

고융점 소재의 열 보조 가공에서 레이저 -플라즈마 다중열원의 예열 효과에 대한 연구

A Study on the Preheating Effect of Multi-Heat Sources using Laser Plasma in the Thermally Assisted Machining of a High-Melting-Point Material

  • 이춘만 (창원대학교 기계공학부) ;
  • 김성규 (창원대학교 메카트로닉스공학부)
  • Lee, Choon-Man (Dept. of Mechanical Engineering, College of Mechatronics, Changwon National University) ;
  • Kim, Seong-Gyu (Mechanical Design and Manufacturing, School of Mechatronics Engineering, Changwon National University)
  • 투고 : 2019.09.06
  • 심사 : 2019.09.23
  • 발행 : 2019.10.30

초록

Recently, with the development of the aerospace and automotive industries, the demand for high-melting-point materials has increased. However, high-melting-point materials are difficult to cut through conventional machining methods. Thermally assisted machining (TAM) is a method for improving the machinability by preheating the materials. A laser, the most commonly used device for TAM, has high efficiency through local preheating but is not sufficient for maintaining a high preheating temperature due to rapid cooling. However, the use of multi-heat sources can supplement the disadvantage of a single heat source. The high preheating temperature can be maintained with a wide and deep heat-affected zone (HAZ) by multi-heat sources. The purpose of this study is to analyze the preheating effects of multi-heat sources using laser plasma. Thermal analysis and preheating experiments were carried out. As a result, the high preheating effect of multi-heat sources compared with a single heat source was verified.

키워드

참고문헌

  1. Kim, D. H., Jung, D. W. and Lee, C. M., "Study on Temperature Effect of Difficulty-to-Cut Material in Laser Heat Treatment Process," Journal of the Korean Society for Precision Engineering, Vol. 31, No. 1, pp. 29-33, 2014. https://doi.org/10.7736/KSPE.2014.31.1.29
  2. Jia, Q. and Gu, D., "Selective Laser Melting Additive Manufacturing of Inconel 718 Superalloy Parts: Densification, Microstructure and Properties," Journal of Alloys and Compounds, Vol. 585, pp. 713-721, 2014. https://doi.org/10.1016/j.jallcom.2013.09.171
  3. Lee, C. M., Woo, W. S., Kim, D. H., Oh, W. J., and Oh, N. S., "Laser-Assisted Hybrid Processes: A Review," International Journal of Precision Engineering and Manufacturing, Vol. 17, No. 2, pp. 257-267, 2016.4, pp. 239-255, 1998. https://doi.org/10.1007/s12541-016-0034-8
  4. Wiedenmann, R. and Zaeh, M. F., "Laser-Assisted Milling-Process Modeling and Experimental Validation," CIRP Journal of Manufacturing Science and Technology, Vol. 8, pp. 70-77, 2015. https://doi.org/10.1016/j.cirpj.2014.08.003
  5. Bermingham, M., Schaffarzyk, P., Palanisamy, S., and Dargusch, M. S., “Laser-Assisted Milling Strategies with Different Cutting Tool Paths,” The International Journal of Advanced Manufacturing Technology, Vol. 74, No. 9, pp. 1487-1494, 2014. https://doi.org/10.1007/s00170-014-6093-z
  6. Ahn, S. H. and Lee, C. M., “A Study On Laser-Area Laser Processing Analysis in Consideration of the Moving Heat Source,” International Journal Precision Engineering Manufacturing, Vol. 12, No. 2, pp. 285-292, 2011. https://doi.org/10.1007/s12541-011-0038-3
  7. Kim, D. H. and Lee, C. M., "A study on the laser-assisted ball-end milling of difficult-to-cut materials using a new back-and-forth preheating method," The International Journal of Advanced Manufacturing Technology, Vol. 85, pp. 1825-1834, 2015.
  8. Woo, W. S. and Lee, C. M., "A Study of the Machining Characteristics of AISI 1045 Steel and Inconel 718 with a Cylindrical Shape in Laser- Assisted Milling," Applied Thermal Engineering, Vol. 91, pp. 33-42, 2015. https://doi.org/10.1016/j.applthermaleng.2015.08.006
  9. Moon, S. H. and Lee, C. M., “An Analytical Study on the Preheating Effect of Flat Workpiece in Thermally Assisted Machining by Multi Heat Sources,” Journal of the Korean Society for Precision Engineering, Vol. 33, No. 8, pp. 629-634, 2015. https://doi.org/10.7736/KSPE.2016.33.8.629

피인용 문헌

  1. Study on Ultra-precision Machining of Si Optics Using Laser-assisted Machining vol.30, pp.5, 2019, https://doi.org/10.7735/ksmte.2021.30.5.339