한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

엔드밀을 활용한 홀 가공 시 표면거칠기 예측에 관한 연구

Prediction of Surface Roughness in Hole Machining Using an Endmill

  • 천세호 (계명문화대학교 기계과)
  • Chun, Se-Ho (Department of Mechanical Engineering, Keimyung College Univ.)
  • 투고 : 2019.04.01
  • 심사 : 2019.05.09
  • 발행 : 2019.10.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Helical machining is an efficient method for machining holes using an endmill. In this study, a surface roughness prediction model was constructed for improving the productivity of hole machining. Experiments were conducted to form holes by the helical machining of AL6061-T4 aluminum sheets and correlation analysis was performed to examine the relationships between the variables based on the measured results. Meanwhile, a regression analysis technique was used to construct and evaluate the prediction model. Through these analyses, the parameter which has the greatest influence on the surface roughness when the hole is formed by the helical machining is the feed, followed by the number of revolutions of the endmill. Moreover, for the axial feed of the endmill, it was concluded that the influence of the surface roughness is small compared to the other two parameters but it is a factor worth considering to improve the accuracy when constructing the predictive model.

키워드

참고문헌

  1. Strenkowski, J. S., Hsieh, C. C., and Shih, A. J., "An analytical finite element technique for predicting thrust force and torque in drilling," International Journal of Machine Tools & Manufacture, Vol. 44, Issues. 12-13, pp. 1413-1421, 2004. https://doi.org/10.1016/j.ijmachtools.2004.01.005
  2. Wang, D. H., and Yun, K. S., “Characteristics of Tool Deflection of Ball-end Mill Cutter in Pencil Cutting of the Corner,” Journal of the Korean Society for Precision Engineering, Vol. 16, No. 2, pp. 123-129, 1999.
  3. Chun, S. H., “Effects of cutting condition on surface roughness in the spiral up milling of aluminum alloy,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 4, pp. 83-90, 2014. https://doi.org/10.14775/ksmpe.2014.13.4.083
  4. Choi, S. Y., Kwon, D. G., Park, I. S., and Wang, D. H., “A Study on Cutting Forces and Tool Deformation when Flat-ended Pocket Machinig,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 2, pp. 28-33, 2017. https://doi.org/10.14775/ksmpe.2017.16.2.028
  5. Zao, Q., Qin, X., Ji, C., Li, Y., Sun, D., and Jin, Y., "Tool life and hole surface integrity studies for hole-making of Ti6Al4V alloy," The International Journal of Advanced Manufacturing Technology, Vol. 79, Issue 5-8, pp. 1017-1026, 2015. https://doi.org/10.1007/s00170-015-6890-z
  6. Pereira, R. B. D., Brandao, L. C., Paiva, A. P., Ferreira, J. R., and Davim, J. P., "A review of helical milling process," International Journal of Machine Tools & Manufacture, Vol. 120, pp. 27-48, 2017. https://doi.org/10.1016/j.ijmachtools.2017.05.002