DOI QR코드

DOI QR Code

Ratcheting behavior of 90° elbow piping under seismic loading

  • Chen, Xiaohui (School of Control Engineering, Northeastern University) ;
  • Huang, Kaicheng (School of Control Engineering, Northeastern University) ;
  • Ye, Sheng (School of Control Engineering, Northeastern University) ;
  • Fan, Yuchen (School of Control Engineering, Northeastern University) ;
  • Li, Zifeng (School of Mechanical Engineering, Yanshan University)
  • 투고 : 2019.06.04
  • 심사 : 2019.09.26
  • 발행 : 2019.11.25

초록

Elastic-plastic behavior of nuclear power plant elbow piping under seismic loads has been conducted in this study. Finite element analyses are performed using classical Bilinear kinematic hardening model (BKIN) and Multilinear kinematic hardening model (MKIN) as well as a nonlinear kinematic hardening model (Chaboche model). The influence of internal pressure and seismic loading on ratcheting strain of elbow pipe is studied by means of the three models. The results found that the predicted results of Chaboche model is maximum, closely followed by the predicted results of MKIN model, and the minimum is the predicted results of BKIN model. Moreover, comparisons of analysis results for each plasticity model against predicted results for a equivalent cyclic loading elbow component and for a simplified piping system seismic test are presented in the paper.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundation of Hebei Province of China, China Postdoctoral Science Foundation, Central Universities

참고문헌

  1. Bari, S. and Hassan, T. (2000), "Anatomy of coupled constitutive models for ratcheting simulation", Int. J. Plastic., 16, 381-409. https://doi.org/10.1016/S0749-6419(99)00059-5.
  2. Beden, S.M. and Allawi, M.K. (2017), "Fatigue life assessment of petroleum pipe elbows", Int. J. Curr. Eng. Technol., 7(1), 92-98.
  3. Chen, X.H., Chen, X., Chen, G. and Li, D.M. (2016), "Evaluation of AF type cyclic plasticity models in ratcheting simulation of pressurized elbow pipes under reversed bending", Steel Compo. Struct., 21(4), 703-753. http://dx.doi.org/10.12989/scs.2016.21.4.703.
  4. Chen, X.H., Chen, X., Yu, D.J. and Gao, B.J. (2013), "Recent progresses in experimental investigation and finite element analysis of ratcheting in pressurized piping", Int. J. Pres. Ves. Pip., 101,113-142. https://doi.org/10.1016/j.ijpvp.2012.10.008.
  5. Karamanos, S.A. (2016), "Mechanical behavior of steel pipe bends; An overview", J. Press. Vess.-T., ASME, 138(4), 041203. https://doi.org/10.1115/1.4031940.
  6. Kim S.W., Jeon, B.G., Chang, S.J. and Yuna, D.W. (2018), "Ratcheting strain measurement of a steel pipe elbow under in-plane cyclic loading", Transactions of the Korean Nuclear Society Spring Meeting Jeju, Korea, May.
  7. Liu, C.M., Yu, D.J., Akram, W. and Chen, X. (2018), "Thermal aging effect on the ratcheting behavior of pressurized elbow pipe", J. Press. Ves. Technol., 40(2), 021604-1-9. https://doi.org/10.1115/1.4039073.
  8. Varvani-Farahani, A. and Nayebi, A. (2018) "Ratcheting in pressurized pipes and equipment: A review on affecting parameters, modelling, safety codes, and challenges", Fatig. Fract. Eng. Mater. Struct., 41(3), 503-538. https://doi.org/10.1111/ffe.12775.
  9. Vishnuvardhan, S., Raghava, G., Gandhi, P., Saravanan, M., Goyal, S., Arora, P., ... & Bhasin, V. (2013), "Ratcheting failure of pressurised straight pipes and elbows under reversed bending", Int. J. Pres. Ves. Pip., 105-106, 79-89. https://doi.org/10.1016/j.ijpvp.2013.03.005.
  10. Vishnuvardhan, S., Raghava, G., Gandhi, P., Saravanan, M., Pukazhendhi, D.M., Sumit Goyal, Suneel K. Gupta, Vivek Bhasin and Vaze, K.K. (2012), "Ratcheting studies on Type 304LN stainless steel elbows subjected to combined internal pressure and in-plane bending", J. Press. Vess.-T., ASME, 134, 041203/1-10. https://doi.org/10.1115/1.4005886.
  11. Zakavi, S.J. and Nourbakhsh, M. (2014), "The ratcheting behaviour of stainless steel pressurized piping elbows subjected to dynamic out-of-plane moments", Modern Mech. Eng., 4, 125-132. http://dx.doi.org/10.4236/mme.2014.43012.
  12. Zakavi, S.J. and Rahmani, V. (2014), "The ratcheting rate of stainless steel pressurized piping branch under seismic loading", Ind. J. Sci. Resea., 3(1), 191-199.
  13. Zakavi, S.J., Ajri, M. and Golshan, V. (2014), "The ratcheting behaviour of plain carbon steel pressurized piping elbows subjected to simulated seismic in-plane bending", World J. Mech., 4, 238-46. http://dx.doi.org/10.4236/mme.2014.43012.
  14. Zakavi, S.J., Shiralivand, B. and Nourbakhsh, M. (2017), "Evaluation of combined hardening model in ratcheting behavior of pressurized piping elbows subjected to in-plane moments", J. Comput. Appl. Res. Mech. Eng., 7(1), 57-71. http://dx.doi.org/10.22061/JCARME.2017.640.
  15. Zheng, X.T., Peng, C.F., Yu, J.Y., Wang, W., Lin, W. and Xu, J.M. (2017), "Analytical ratchet limit for pressurized pipeline under cyclic nonproportional loadings ", J. Pip. Syst. Eng. Pract., 8(3), 04017002. https://doi.org/10.1061/(ASCE)PS.1949-1204.0000260.