DOI QR코드

DOI QR Code

Monthly Heating Energy Needs Analysis According to ISO 13790 and ISO 52016

ISO 13790과 ISO 52016에 의한 월별 난방에너지 소요량 분석

  • Zo, Chung-Hoon (Department of Architectural Engineering, Kyung Hee University) ;
  • Yun, Geun-Young (Department of Architectural Engineering, Kyung Hee University)
  • 조정훈 (경희대학교 건축공학과) ;
  • 윤근영 (경희대학교 건축공학과)
  • Received : 2019.10.03
  • Accepted : 2019.10.22
  • Published : 2019.10.30

Abstract

Governments are increasing energy efficiency in buildings through various policies to reduce building energy consumption. In 2002, the European Union adopted a building energy performance guideline to set minimum efficiency standards for residential and commercial buildings. Starting in 2020, all EU member states should ensure that all buildings are Near-Zero Energy Buildings (NZEB). In Korea, the government issued a zero-energy certification system. Since 2020, public buildings are required to cover energy consumption with the energy produced in buildings. As the demand for building energy simulation has increased to increase the energy efficiency of these buildings, the International Standard Organization (ISO) has created a standard for calculating building energy requirements called ISO 13790. This standard was revised to ISO 52016 in 2017. In this research, ISO 13790, which calculates the energy needs of existing buildings, and ISO 52016, which replaces them, are compared and analyzed, and applied to the calculation of heating energy needs of buildings. For models without thermal zoning(Case A), the difference in annual heating energy needs calculated from each criterion is $1.08kWh/m^2$, which is about 2% higher in ISO 52016. In the case of the thermal zoning model(Case B), the difference in annual heating energy needs calculated by each standard was $0.97kWh/m^2$, which was about 2% higher than ISO 52016. The heating energy needs model without thermal zoning has a higher energy needs than the heating energy needs model with thermal zoning. It is about 16% energy at $8.58kWh/m^2$ for ISO 13790 and $8.69kWh/m^2$ for ISO 52016.

Keywords

References

  1. Attia, S., Eleftheriou, P., Xeni, F., Morlot, R., Menezo, C., Kostopoulos, V., Betsi, M., Kalaitzoglou, I., Pagliano, L., Cellura, M., Almeida M., Ferreira, M., Tudor Baracu, Viorel Badescu, Ruxandra Crutescu, Juan MariaHidalgo-Betanzos, Overview and Future Challenges of Nearly Zero Energy Buildings (nZEB) Design in Southern Europe. Energy and Buildings, Vol. 155, pp. 439-458, 2017. https://doi.org/10.1016/j.enbuild.2017.09.043
  2. Outline of Zero Energy Building Certification System, Ministry of Land, Infrastructure and Transport. http://www.molit.go.kr/USR/WPGE0201/m_36421/DTL.jsp
  3. http://www.molit.go.kr/USR/WPGE0201/m_36421/DTL.jsp
  4. Dijk, D. V., Spiekman, M., and van Oeffelen, L. H., EPB Standard EN ISO 52016: Calculation of the Building'S Energy Needs for Heating and Cooling, Internal Temperatures and Heating and Cooling Load, 2016.
  5. International Organization for Standardization, Energy performance of buildings - Energy Needs for Heating and Cooling, Internal Temperatures and Sensible and Latent Heat Loads - Part 1: Calculation Procedures (ISO Standard No. 52016-1:2017); 2017.
  6. International Organization for Standardization. Energy performance of Buildings-Energy Needs for Heating and Cooling, Internal Temperatures and Sensible and Latent Heat Loads - Part 2: Explanation and Justification of ISO 52016-1 and ISO 52017-1 (ISO Standard No. ISO/TR 52016-2:2017); 2017.
  7. Ahn, K. U., Kim, Y. J., and Park, C. S., Issues on Dynamic Building Energy Performance Assessment in Design Process. Journal of the Architectural Institute of Korea Planning & Design, Vol. 28, No. 12, pp. 361-369, 2012. https://doi.org/10.5659/JAIK_PD.2012.28.12.361
  8. Oh, S. M. and Park, C. S., Comparison of ISO 13790 Monthly Calculation Method with Dynamic Energy Simulation. J. Korean Inst. Archit. Sustain. Environ. Build. Syst, pp. 139-142, 2011.
  9. Kim, H. G., Jang, H. I., Park, C. Y., Yoon, S. H., Choi, C. H., and Hong, J. P., Comparison of Analysis Results between Quasisteady-state Method Based on ISO 13790 and Dynamic Method Using Weather Data. Journal of KIAEBS, Vol. 7, No. 4, pp. 274-280, 2013.
  10. Song, S., Koo, B., and Lim, J., Comparison of Annual Heating and Cooling Energy Demands of Internally and Externally Insulated Apartment Buildings Considering the Thermal Bridging Effect and the Heat Capacity Difference Using Monthly Calculation Method of ISO 13790. Journal of the Architectural Institute of Korea, Vol. 26, No. 7, pp. 321-332, 2010.
  11. Choi, H., Han, S., Lee, D., Yu, H., and Kim, J., Applicability of Utilization Factors in ISO 13790 Monthly Method Load Calculation for Office Building in Korean context. Journal of Korean Institute of Architectural Sustainable Environment and Building Systems, Vol. 7, No. 2, pp. 126-134, 2013.
  12. Horvat, I. and Dovic, D., Dynamic Modeling Approach for Determining Buildings Technical System Energy Performance. Energy Conversion and Management, Vol. 125, pp. 154-165, 2016. https://doi.org/10.1016/j.enconman.2016.03.062
  13. International Organization for Standardization, EN ISO 52016 : Energy Performance of Buildings - Energy Needs for Heating and Cooling, Internal Temperature and Sensible and Latent Heat Loads-Part1 : Calculation Procedures, https://www.iso.org/standard/65696.html, 2017.
  14. Regulation of building energy efficiency certification system, Korea Energy Agency, 2013.