DOI QR코드

DOI QR Code

Combined effects of end-shortening strain, lateral pressure load and initial imperfection on ultimate strength of laminates: nonlinear plate theory

  • Ghannadpour, S.A.M. (New Technologies and Engineering Department, Shahid Beheshti University) ;
  • Barvaj, A. Kurkaani (New Technologies and Engineering Department, Shahid Beheshti University)
  • 투고 : 2019.05.03
  • 심사 : 2019.10.02
  • 발행 : 2019.10.25

초록

The present study aims to investigate the ultimate strength and geometric nonlinear behavior of composite plates containing initial imperfection subjected to combined end-shortening strain and lateral pressure loading by using a semi-analytical method. In this study, the first order shear deformation plate theory is considered with the assumption of large deflections. Regarding in-plane boundary conditions, two adjacent edges of the laminates are completely held while the two others can move straightly. The formulations are based on the concept of the principle of minimum potential energy and Newton-Raphson technique is employed to solve the nonlinear set of algebraic equations. In addition, Hashin failure criteria are selected to predict the failures. Further, two distinct models are assumed to reduce the mechanical properties of the failure location, complete ply degradation model, and ply region degradation model. Degrading the material properties is assumed to be instantaneous. Finally, laminates having a wide range of thicknesses and initial geometric imperfections with different intensities of pressure load are analyzed and discuss how the ultimate strength of the plates changes.

키워드

참고문헌

  1. Aghaei, M., Forouzan, M.R., Nikforouz, M. and Shahabi, E. (2015), "A study on different failure criteria to predict damage in glass/polyester composite beams under low velocity impact", Steel Compos. Struct., Int. J., 18(5), 1291-1303. https://doi.org/10.12989/scs.2015.18.5.1291
  2. Argyris, J. and Tenek, L. (1997), "Recent advances in computational thermostructural analysis of composite plates and shells with strong nonlinearities", Appl. Mech. Rev., 50(5), 285-306. https://doi.org/10.1115/1.3101708
  3. Becheri, T., Amara, K., Bouazza, M. and Benseddiq, N. (2016), "Buckling of symmetrically laminated plates using nth-order shear deformation theory with curvature effects", Steel Compos. Struct., Int. J., 21(6), 1347-1368. https://doi.org/10.12989/scs.2016.21.6.1347
  4. Brubak, L. and Hellesland, J. (2007a), "Approximate buckling strength analysis of arbitrarily stiffened, stepped plates", Eng. Struct., 29(9), 2321-2333. https://doi.org/10.1016/j.engstruct.2006.12.002
  5. Brubak, L. and Hellesland, J. (2007b), "Semi-analytical postbuckling and strength analysis of arbitrarily stiffened plates in local and global bending", Thin-Wall. Struct., 45(6), 620-633. https://doi.org/10.1016/j.tws.2007.04.011
  6. Brubak, L. and Hellesland, J. (2008), "Strength criteria in semianalytical, large deflection analysis of stiffened plates in local and global bending", Thin-Wall. Struct., 46(12), 1382-1390. https://doi.org/10.1016/j.tws.2008.03.013
  7. Brubak, L., Hellesland, J. and Steen, E. (2007), "Semi-analytical buckling strength analysis of plates with arbitrary stiffener arrangements", J. Constr. Steel Res., 63(4), 532-543. https://doi.org/10.1016/j.jcsr.2006.06.002
  8. Ghaheri, A., Keshmiri, A. and Taheri-Behrooz, F. (2014), "Buckling and vibration of symmetrically laminated composite elliptical plates on an elastic foundation subjected to uniform inplane force", J. Eng. Mech., 140(7), 04014049. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000760
  9. Ghannadpour, S.A.M. and Ovesy, H.R. (2009a), "The application of an exact finite strip to the buckling of symmetrically laminated composite rectangular plates and prismatic plate structures", Compos. Struct., 89(1), 151-158. https://doi.org/10.1016/j.compstruct.2008.07.014
  10. Ghannadpour, S.A.M. and Ovesy, H.R. (2009b), "Exact postbuckling stiffness calculation of box section struts", Eng. Computat., 26(7), 868-893. https://doi.org/10.1108/02644400910985224
  11. Ghannadpour, S.A.M. and Barekati, M. (2016), "Initial imperfection effects on postbuckling response of laminated plates under end-shortening strain using Chebyshev techniques", Thin-Wall. Struct., 106, 484-494. https://doi.org/10.1016/j.tws.2016.03.028
  12. Ghannadpour, S.A.M. and Shakeri, M. (2018), "Energy based collocation method to predict progressive damage behavior of imperfect composite plates under compression", Latin Am. J. Solids Struct., 15(4). https://doi.org/10.1016/j.compstruct.2018.04.011
  13. Ghannadpour, S.A.M., Ovesy, H.R. and Zia-Dehkordi, E. (2014), "An exact finite strip for the calculation of initial post-buckling stiffness of shear-deformable composite laminated plates", Compos. Struct., 108, 504-513. https://doi.org/10.1016/j.compstruct.2013.09.049
  14. Ghannadpour, S.A.M., Kiani, P. and Reddy, J.N. (2017), "Pseudo spectral method in nonlinear analysis of relatively thick imperfect laminated plates under end-shortening strain", Compos. Struct., 182, 694-710. https://doi.org/10.1016/j.compstruct.2017.08.076
  15. Ghannadpour, S.A.M., Kurkaani Barvaj, A. and Tornabene, F. (2018a), "A semi-analytical investigation on geometric nonlinear and progressive damage behavior of relatively thick laminated plates under lateral pressure and end-shortening", Compos. Struct., 194, 598-610. https://doi.org/10.1016/j.compstruct.2018.04.011
  16. Ghannadpour, S.A.M., Shakeri, M. and Kurkaani Barvaj, A. (2018b), "Ultimate strength estimation of composite plates under combined in-plane and lateral pressure loads using two different numerical methods", Steel Compos. Struct., Int. J., 29(6), 781-798. https://doi.org/10.12989/scs.2018.29.6.785
  17. Hashin, Z. and Rotem, A. (1973), "A fatigue failure criterion for fiber reinforced materials", J. Compos. Mater., 7, 448-464. https://doi.org/10.1177/002199837300700404
  18. Hayman, B., Berggreen, C., Lundsgaard-Larsen, C., Delarche, A., Toftegaard, H., Dow, R.S., Downes, J., Misirlis, K., Tsouvalis, N. and Douka, C. (2011), "Studies of the buckling of composite plates in compression", Ships Offshore Struct., 6(1-2), 81-92. https://doi.org/10.1080/17445302.2010.528283
  19. Jiang, G., Li, F. and Li, X. (2016), "Nonlinear vibration analysis of composite laminated trapezoidal plates", Steel Compos. Struct., Int. J., 21(2), 395-409. https://doi.org/10.12989/scs.2016.21.2.395
  20. Jiang, H., Ren, Y., Liu, Z., Zhang, S. and Wang, X. (2018), "Evaluations of failure initiation criteria for predicting damages of composite structures under crushing loading", J. Reinf. Plastics Compos., 37(21), 1279-1303. https://doi.org/10.1177/0731684418783847
  21. Kar, V.R. and Panda, S.K. (2016), "Post-buckling behaviour of shear deformable functionally graded curved shell panel under edge compression", Int. J. Mech. Sci., 115, 318-324. https://doi.org/10.1177/0731684418783847
  22. Li, S.R., Batra, R.C. and Ma, L.S. (2007), "Vibration of thermally post-buckled orthotropic circular plates", J. Thermal Stresses, 30(1), 43-57. https://doi.org/10.1080/01495730600897161
  23. Magnucki, K., Malinowski, M. and Kasprzak, J. (2006), "Bending and buckling of a rectangular porous plate", Steel Compos. Struct., Int. J., 6(4), 319-333. https://doi.org/10.12989/scs.2006.6.4.319
  24. Nejati, M., Dimitri, R., Tornabene, F. and Hossein Yas, M. (2017), "Thermal buckling of nanocomposite stiffened cylindrical shells reinforced by functionally Graded wavy Carbon NanoTubes with temperature-dependent properties", Appl. Sci., 7(12), 1223. https://doi.org/10.3390/app7121223
  25. Ovesy, H.R. and Ghannadpour, S.A.M. (2011), "An exact finite strip for the initial postbuckling analysis of channel section struts", Comput. Struct., 89(19-20), 1785-1796. https://doi.org/10.1016/j.compstruc.2010.10.009
  26. Ovesy, H.R., Ghannadpour, S.A.M. and Morada, G. (2005), "Geometric non-linear analysis of composite laminated plates with initial imperfection under end shortening, using two versions of finite strip method", Compos. Struct., 71(3-4), 307-314. https://doi.org/10.1016/j.compstruct.2005.09.030
  27. Ovesy, H.R., Ghannadpour, S.A.M. and Nassirnia, M. (2015), "Post-buckling analysis of rectangular plates comprising Functionally Graded Strips in thermal environments", Comput. Struct., 147, 209-215. https://doi.org/10.1016/j.compstruc.2014.09.011
  28. Panda, S.K. and Singh, B.N. (2013), "Nonlinear finite element analysis of thermal post-buckling vibration of laminated composite shell panel embedded with SMA fibre", Aerosp. Sci. Technol., 29(1), 47-57. https://doi.org/10.1016/j.compstruc.2014.09.011
  29. Sun, Y., Li, S.R. and Batra, R.C. (2016), "Thermal buckling and post-buckling of FGM Timoshenko beams on nonlinear elastic foundation", J. Thermal Stresses, 39(1), 11-26. https://doi.org/10.1080/01495739.2015.1120627
  30. Taheri-Behrooz, F., Omidi, M. and Shokrieh, M.M. (2017), "Experimental and numerical investigation of buckling behavior of composite cylinders with cutout", Thin-Wall. Struct., 116, 136-144. https://doi.org/10.1016/j.tws.2017.03.009
  31. Timoshenko, S.P. and Gere, J.M. (2009), Theory of Elastic Stability, Courier Corporation, New York, NY, USA.
  32. Topal, U. (2013), "Application of a new extended layerwise approach to thermal buckling load optimization of laminated composite plates", Steel Compos. Struct., Int. J., 14(3), 283-293. https://doi.org/10.12989/scs.2013.14.3.283
  33. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2017), "Linear static behavior of damaged laminated composite plates and shells", Materials, 10(7), 811. https://doi.org/10.3390/ma10070811
  34. Yang, Q.J. and Hayman, B. (2015a), "Prediction of post-buckling and ultimate compressive strength of composite plates by semianalytical methods", Eng. Struct., 84, 42-53. https://doi.org/10.1016/j.engstruct.2014.11.013
  35. Yang, Q.J. and Hayman, B. (2015b), "Simplified ultimate strength analysis of compressed composite plates with linear material degradation", Compos. Part B: Eng., 69, 13-21. https://doi.org/10.1016/j.compositesb.2014.09.016
  36. Yang, Q.J., Hayman, B. and Osnes, H. (2013), "Simplified buckling and ultimate strength analysis of composite plates in compression", Compos. Part B: Eng., 54, 343-352. https://doi.org/10.1016/j.compositesb.2013.05.017

피인용 문헌

  1. A semi-analytical study on effects of geometric imperfection and curved fiber paths on nonlinear response of compression-loaded laminates vol.40, pp.4, 2019, https://doi.org/10.12989/scs.2021.40.4.621