DOI QR코드

DOI QR Code

부분 설절제술을 받은 환자에서의 연마면 인상 및 Direct Metal Laser Sintering 을 이용한 총의치 제작 증례

Complete denture making in a patient of partial glossectomy using polished surface impression taking and direct metal laser sintering method: A case report

  • 정연욱 (조선대학교 치과대학 치과보철학교실) ;
  • 이경제 (조선대학교 치과대학 치과보철학교실) ;
  • 김희중 (조선대학교 치과대학 치과보철학교실)
  • Jung, Yeon-Wook (Department of Prosthodontics, College of Dentistry, Chosun University) ;
  • Lee, Gyeong-Je (Department of Prosthodontics, College of Dentistry, Chosun University) ;
  • Kim, Hee-Jung (Department of Prosthodontics, College of Dentistry, Chosun University)
  • 투고 : 2019.03.18
  • 심사 : 2019.07.05
  • 발행 : 2019.10.31

초록

성공적인 총의치를 위해서는 유지, 안정, 지지 세가지 요소가 필수적으로 요구된다. 또한 심한 치조제의 흡수나 수술에 의한 반흔으로 인해 하악 설측변연 형성이 어려운 총의치 제작시에는 무교두 치아배열, 연마면 인상, 무게 보강 내부금속 삽입, 의치 접착 크림의 사용 등의 다양한 고려사항이 필요하다. 본 환자의 경우 심한 치주염으로 심하게 골흡수가 된 무치악 치조제를 가졌고, 또한 설암으로 인한 설절제술로 인해 연조직의 문제를 가진 환자이다. 부가적인 유지와 안정을 얻기 위해 연마면 인상과 내부 보강 금속구조물의 삽입 그리고 최소 가압 인상 등의 방법을 적용하여 보다 나은 임상적 결과를 나타내었다. 또한 원하는 3차원적 형태를 정확하게 부여하고 제작시 복잡한 기공과정을 줄인 금속 구조물을 제작하기 위해 최소 가압 인상 채득과 Direct metal laser sintering이 사용되었다.

For the success of complete denture, three essential requirements such as retention, stability and support are needed. Moreover, due to the absorption of residual ridge and scarring due to the surgery, when making a complete denture, which is difficult to form the mandibular lingual margins, various considerations such as the arrangement of the Non-anatomical dl non-anatomical teeth, the polished surface impression, the internally weighted metal framework and the use of the denture adhesive cream are necessary. In this case report, the patient has a severely resorbed edentulous ridge from severe periodontitis and has some soft tissue problems after the glossectomy due to tongue cancer. To obtain additional retention and stability, some trials such as polished surface impression taking, internally weighted metal insertion and minimal pressure impression were done for the better result. Moreover To make a metal framework that precisely shapes the desired three-dimensional shape and reduces the complicated process, minimal pressure impression method and direct metal laser sintering technique were used.

키워드

참고문헌

  1. Bencharit S, Schardt-Sacco D, Border MB, Barbaro CP. Full mouth rehabilitation with implant-supported prostheses for severe periodontitis: a case report. Open Dent J 2010;4:165-71. https://doi.org/10.2174/1874210601004010165
  2. Doundoulakis JH, Eckert SE, Lindquist CC, Jeffcoat MK. The implant-supported overdenture as an alternative to the complete mandibular denture. J Am Dent Assoc 2003;134:1455-8. https://doi.org/10.14219/jada.archive.2003.0073
  3. MacEntee MI, Walton JN. The economics of complete dentures and implant-related services: a framework for analysis and preliminary outcomes. J Prosthet Dent 1998;79:24-30. https://doi.org/10.1016/S0022-3913(98)70189-1
  4. Jacobson TE, Krol AJ. A contemporary review of the factors involved in complete dentures. Part II: stability. J Prosthet Dent 1983;49:165-72. https://doi.org/10.1016/0022-3913(83)90494-8
  5. Pleasure MA. Anatomic versus nonanatomic teeth. J Prosthet Dent 1953;3:747-54. https://doi.org/10.1016/0022-3913(53)90143-7
  6. Kapur KK, Soman S. The effect of denture factors on masticatory performance: Part II: Influence of the polished surface contour of denture base. J Prosthet Dent 1965;15:231-40. https://doi.org/10.1016/0022-3913(65)90092-2
  7. Hazari P, Yadav M, Gaikwad A, Singh V, Somkuwar K. Internally weighted dentures: a treatment modality for severely resorbed mandibular ridge: a case report. J Evol Med Dent Sci 2014;3:10374-8. https://doi.org/10.14260/jemds/2014/3347
  8. Ciocca L, Fantini M, De Crescenzio F, Corinaldesi G, Scotti R. Direct metal laser sintering (DMLS) of a customized titanium mesh for prosthetically guided bone regeneration of atrophic maxillary arches. Med Biol Eng Comput 2011;49:1347-52. https://doi.org/10.1007/s11517-011-0813-4
  9. Cawood JI, Howell RA. A classification of the edentulous jaws. Int J Oral Maxillofac Surg 1988;17:232-6. https://doi.org/10.1016/S0901-5027(88)80047-X
  10. Tallgren A. The continuing reduction of the residual alveolar ridges in complete denture wearers: a mixed-longitudinal study covering 25 years. J Prosthet Dent 1972;27:120-32. https://doi.org/10.1016/0022-3913(72)90188-6
  11. Lytle RB. Soft tissue displacement beneath removable partial and complete dentures. J Prosthet Dent 1962;12:34-43. https://doi.org/10.1016/0022-3913(62)90005-7
  12. Zlataric DK, Celebic A. Clinical bone densitometric evaluation of the mandible in removable denture wearers dependent on the morphology of the mandibular cortex. J Prosthet Dent 2003;90:86-91. https://doi.org/10.1016/S0022-3913(03)00171-9
  13. Pleasure MA. Prosthetic occlusion-A problem in mechanics. J Am Dent Assoc Dent Cosm 1937;24:1303-18. https://doi.org/10.14219/jada.archive.1937.0216
  14. Thomson JC. The load factor in complete denture intolerance. J Prosthet Dent 1971;25:4-11. https://doi.org/10.1016/0022-3913(71)90143-0
  15. Ikebe K, Morii K, Kashiwagi J, Nokubi T, Ettinger RL. Impact of dry mouth on oral symptoms and function in removable denture wearers in Japan. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2005;99:704-10. https://doi.org/10.1016/j.tripleo.2004.09.008
  16. Papadiochou S, Emmanouil I, Papadiochos I. Denture adhesives: a systematic review. J Prosthet Dent 2015;113:391-7. https://doi.org/10.1016/j.prosdent.2014.11.001
  17. Beresin VE, Schiesser FJ. The neutral zone in complete dentures. 1976. J Prosthet Dent 2006;95:93-100. https://doi.org/10.1016/j.prosdent.2005.10.005
  18. Grunewald AH. Gold base lower dentures. J Prosthet Dent 1964;14:432-41. https://doi.org/10.1016/S0022-3913(64)80008-1
  19. Kim H, Brewer JD, Monaco E. Internally weighted mandibular denture fabrication using a processed denture base. J Prosthet Dent 2009;102:123-5. https://doi.org/10.1016/S0022-3913(09)60121-9
  20. Balch JH, Smith PD, Marin MA, Cagna DR. Reinforcement of a mandibular complete denture with internal metal framework. J Prosthet Dent 2013;109:202-5. https://doi.org/10.1016/S0022-3913(13)60045-1