Steel and Composite Structures

  • 제33권1호
  • /
  • Pages.67-79
  • /
  • 2019
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and analytical investigation of composite columns made of high strength steel and high strength concrete

  • Lai, Binglin (Department of Civil and Environmental Engineering, National University of Singapore) ;
  • Liew, J.Y. Richard (Department of Civil and Environmental Engineering, National University of Singapore) ;
  • Xiong, Mingxiang (Protective Structures Centre, School of Civil Engineering, Guangzhou University)
  • 투고 : 2019.01.24
  • 심사 : 2019.09.25
  • 발행 : 2019.10.10
⟨ 이전 논문 다음 논문 ⟩

초록

Composite columns made of high strength materials have been used in high-rise construction owing to its excellent structural performance resulting in smaller cross-sectional sizes. However, due to the limited understanding of its structural response, current design codes do not allow the use of high strength materials beyond a certain strength limit. This paper reports additional test data, analytical and numerical studies leading to a new design method to predict the ultimate resistance of composite columns made of high strength steel and high strength concrete. Based on previous study on high strength concrete filled steel tubular members and ongoing work on high strength concrete encased steel columns, this paper provides new findings and presents the feasibility of using high strength steel and high strength concrete for general double symmetric composite columns. A nonlinear finite element model has been developed to capture the composite beam-column behavior. The Eurocode 4 approach of designing composite columns is examined by comparing the test data with results obtained from code's predictions and finite element analysis, from which the validities of the concrete confinement effect and plastic design method are discussed. Eurocode 4 method is found to overestimate the resistance of concrete encased composite columns when ultra-high strength steel is used. Finally, a strain compatibility method is proposed as a modification of existing Eurocode 4 method to give reasonable prediction of the ultimate strength of concrete encased beam-columns with steel strength up to 900 MPa and concrete strength up to 100 MPa.

키워드

참고문헌

  1. AIJ (1997), Recommendations for design and construction of concrete filled steel tubular structures; Architectural Institute of Japan; Japan. [In Japanese]
  2. ANSI/AISC 360-16 (2016), Specification for Structural Steel Buildings, American Institute of Steel Construction (AISC); Chicago, IL, USA.
  3. CEB high performance concrete (1995), Bull. D'information No. 228. Lausanne; 46P.
  4. Chen, C.C. and Lin, N.J. (2006), "Analytical model for predicting axial capacity and behavior of concrete encased steel composite stub columns", J. Constr. Steel Res., 62(5), 424-433. https://doi.org/10.1016/j.jcsr.2005.04.021
  5. Chen, C.C. and Yeh, S.C. (1996), "Ultimate strength of concrete encased steel composite columns",Proceedings of the Third National Conference on Structural Engineering: 2197-206. (in Chinese)
  6. Du, Y.S., Chen, Z.H. and Xiong, M.X. (2016), "Experimental behavior and design method of rectangular concrete-filled tubular columns using Q460 high-strength steel", Constr. Build. Mater., 125, 856-872. https://doi.org/10.1016/j.conbuildmat.2016.08.057
  7. Du, Y.S., Chen, Z.H., Liew, J.Y.R. and Xiong, M.X. (2017), "Rectangular concrete-filled steel tubular beam-columns using high-strength steel: experiments and design", J. Constr. Steel Res., 131, 1-8.https://doi.org/10.1016/j.jcsr.2016.12.016
  8. Ellobody, E. and Young, B. (2011), "Numerical simulation of concrete encased steel composite columns", J. Constr. Steel Res., 67(2), 211-222.https://doi.org/10.1016/j.jcsr.2010.08.003
  9. Ellobody, E., Young, B. and Lam, D. (2011), "Eccentrically loaded concrete encased steel composite columns", Thin-Wall.Struct., 49(1), 53-65.https://doi.org/10.1016/j.tws.2010.08.006
  10. El-Tawil, S. and Deierlein, G.G. (1999), "Strength and ductility of concrete encased composite columns", J. Struct. Eng., 125(9), 1009-1019. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:9(1009)
  11. EN 1992-1-1 (2004), Eurocode 2: Design of Concrete Structures-Part 1-1. General Rules and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
  12. EN 1993-1-1 (2005), Eurocode 3: Design of Steel Structures-Part 1-1. General Rules and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
  13. EN 1994-1-1 (2004), Eurocode 4: Design of Composite Steel and Concrete Structures-Part 1-1. General Rules and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
  14. Fenollosa, E., Gil, E., Cabrera, I. and Vercher, J. (2015), "Elasticplastic formulation for concrete encased sections interaction diagram tracing", Steel Compos. Struct., Int. J., 19(4), 861-876. https://doi.org/10.12989/scs.2015.19.4.861
  15. Guler, K., Demir, F. and Pakdamar, F. (2012), "Stress-strain modelling of high strength concrete by fuzzy logic approach", Constr. Build. Mater., 37, 680-684. https://doi.org/10.1016/j.conbuildmat.2012.07.069
  16. Han, L.H., Zhao, X.L. and Tao, Z. (2001), "Tests and mechanics model for concrete-filled SHS stub columns, columns and beamcolumns", Steel Compos. Struct., Int. J., 1(1), 51-74. https://doi.org/10.12989/scs.2001.1.1.051
  17. Han, L.H., Yao, G.H. and Tao, Z. (2007), "Performance of concrete-filled thin-walled steel tubes under pure torsion", Thin-Wall. Struct., 45(1), 24-36. https://doi.org/10.1016/j.tws.2007.01.008
  18. Hanswille, G., Bergmann, M. and Bergmann, R. (2017), "Design of composite columns with cross-sections not covered by Eucocode 4", Steel Constr., 10(1), 10-16. https://doi.org/10.1002/stco.201710004
  19. JGJ 138-2016 (2016), Code for design of composite structures, Ministry of Housing and Urban-Rural Development of the People's Republic of China, China. [In Chinese]
  20. Johansson, M. and Gylltoft, K. (2001), "Structural behavior of slender circular steel-concrete composite columns under various means of load application", Steel Compos. Struct., Int. J., 1(4), 393-410.https://doi.org/10.12989/scs.2001.1.4.393
  21. Kim, D.K. (2005),"A database for composite columns", Master Dissertation; Georgia Institute of Technology, Atlanta, GA, USA.
  22. Kim, C.S., Park, H.G., Chung, K.S. and Choi, I.R. (2011), "Eccentric axial load testing for concrete-encased steel columns using 800 MPa steel and 100 MPa concrete", J. Struct. Eng., 138(8), 1019-1031. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000533
  23. Kim, C.S., Park, H.G., Chung, K.S. and Choi, I.R. (2013), "Eccentric axial load capacity of high-strength steel-concrete composite columns of various sectional shapes", J. Struct. Eng., 140(4), 04013091. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000879
  24. Lai, B.L., Liew, J.Y.R. and Li, S. (2018), "Finite element analysis of concrete-encased steel composite columns with off-center steel section", Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures, ASCCS 2018, Valencia, June, pp. 297-303.
  25. Lai, B.L., Liew, J.Y.R. and Wang, T.Y. (2019), "Buckling behaviour of high strength concrete encased steel composite columns", J. Constr. Steel Res., 154, 27-42. https://doi.org/10.1016/j.jcsr.2018.11.023
  26. Lam, D. and Williams, C.A. (2004), "Experimental study on concrete filled square hollow sections", Steel Compos. Struct., Int. J., 4(2), 95-112.https://doi.org/10.12989/scs.2004.4.2.095
  27. Liew, J.Y.R. and Xiong, M.X. (2015), "Design guide for concrete filled tubular members with high strength materials - an extension of Eurocode 4 method to C90/105 concrete and S550 steel", Research Publishing, Sinapore.
  28. Liew, J.Y.R., Xiong, M.X. and Xiong, D.X. (2016), "Design of concrete filled tubular beam-columns with high strength steel and concrete", Structures, 8, 213-226. https://doi.org/10.1016/j.istruc.2016.05.005
  29. Liu, S.W., Liu, Y.P. and Chan, S.L. (2012), "Advanced analysis of hybrid steel and concrete frames: part 1: cross-section analysis technique and second-order analysis", J. Constr. Steel Res., 70, 326-336. https://doi.org/10.1016/j.jcsr.2011.09.003
  30. Munoz, P.R. and Hsu, C.T. (1997), "Biaxially loaded concreteencased composite columns: design equation", J. Struct. Eng., 123(12), 1576-1585. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:12(1576)
  31. Roik, K. and Bergmann, R. (1990), "Design method for composite columns with unsymmetrical cross-sections", J. Constr. Steel Res., 15, 153-168. https://doi.org/10.1016/0143-974X(90)90046-J
  32. Tokgoz, S. and Dundar, C. (2008), "Experimental tests on biaxially loaded concrete-encased composite columns", Steel Compos. Struct., Int. J., 8(5), 423-438. https://doi.org/10.12989/scs.2008.8.5.423
  33. Tsai, K.C., Lien, Y. and Chen, C.C. (1996), "Behaviour of axially loaded steel reinforced concrete columns", J. Chinese Inst. Civil Hydraulic Eng., 8(4), 535-545. [In Chinese]
  34. Uy, B. (2001), "Axial compressive strength of short steel and composite columns fabricated with high strength steel plate", Steel Compos.Struct., Int. J., 1(2), 171-185. https://doi.org/10.12989/scs.2001.1.2.171
  35. Wang, Y.B., Liew, J.Y.R., Lee, S.C. and Xiong, D.X. (2016), "Experimental Study of Ultra-High-Strength Concrete under Triaxial Compression", ACI Mater. J., 113(1), 105-112.
  36. Xiong, M.X., Xiong, D.X. and Liew, J.Y.R. (2017a), "Axial performance of short concrete filled steel tubes with high-and ultra-high-strength materials", Eng. Struct., 136, 494-510. https://doi.org/10.1016/j.engstruct.2017.01.037
  37. Xiong, M.X., Xiong, D.X. and Liew, J.Y.R. (2017b), "Behaviour of steel tubular members infilled with ultrahigh strength concrete", J. Constr. Steel Res., 138, 168-183. https://doi.org/10.1016/j.jcsr.2017.07.001
  38. Zhu, W.Q., Meng, G. and Jia, J.Q. (2014), "Experimental studies on axial load performance of high-strength concrete short columns", Proceedings of the Institution of Civil Engineers-Structures and Buildings, 167(9), 509-519. https://doi.org/10.1680/stbu.13.00027

피인용 문헌

  1. Influence of internal pores and graphene platelets on vibration of non-uniform functionally graded columns vol.35, pp.2, 2019, https://doi.org/10.12989/scs.2020.35.2.295
  2. Analytical behavior of built-up square concrete-filled steel tubular columns under combined preload and axial compression vol.38, pp.6, 2019, https://doi.org/10.12989/scs.2021.38.6.617
  3. Behaviour of high strength concrete-filled short steel tubes under sustained loading vol.39, pp.2, 2019, https://doi.org/10.12989/scs.2021.39.2.159