References
- M. Li, D. W. Kim, S. Gu, D. Y. Parkinson, H. Barnard, and K. N. Tu, "Joule heating induced thermomigration failure in un-powered microbumps due to thermal crosstalk in 2.5D IC technology", J. Appl. Phys., 120, 075105 (2016). https://doi.org/10.1063/1.4961219
-
J. Feng, C. Hang, Y. Tian, B. Liu, and C. Wang, "Growth kinetics of
$Cu_6Sn_5$ intermetallic compound in Cu-liquid Sn interfacial reaction enhanced by electric current", Scientific reports, 8, 1775 (2018). https://doi.org/10.1038/s41598-018-20100-1 - The European Parliament and of the Council of the European Union, "Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS)", JO EU L, 37, 19 (2003).
- J. H. Lee, N. H. Kang, C. W. Lee, and J. H. Kim, "Necessity of Low Melting Temperature Pb-free Solder Alloy and Characteristics of Representative Alloys", J. of KWJS, 24(2), 17 (2006).
- S. H. Kim, G. T. Park, B. R. Lee, J. M. Kim, S. Yoo, and Y. B. Park, "Effects of PCB Surface Finishes on in-situ Intermetallics Growth and Electromigration Characteristics of Sn-3.0Ag-0.5Cu Pb-free Solder Joints", J. Microelectron. Packag. Soc., 22(2), 47 (2015). https://doi.org/10.6117/kmeps.2015.22.2.047
- Y. E. Shin, and S. J. Hwang, "Characterization of the Sn-Ag-Cu and Sn-Cu Lead-free Solder by adding P", J. Korean Inst. Electr. Electron. Mater. Eng., 16(6), 549 (2003). https://doi.org/10.4313/JKEM.2003.16.6.549
- D. Suh, D. W. Kim, P. Liu, H. Kim, J. A. Weninger, C. M. Kumar, A. Prasad, B. W. Grimsley, and H. B. Tejada, "Effects of Ag Content on Fracture Resistance of Sn-Ag-Cu Lead-Free Solders under High-Strain Rate Conditions", Mater. Sci. Eng. A., 460, 595 (2007).
- Y. H. Ko, K. Choi, S.W. Kim, D. Y. Yu, J. Bang, and T. S. Kim, "Trends of Researches and Technologies of Electronic Packaging Using Graphene", J. Microelectron. Packag. Soc., 23(2), 1 (2016). https://doi.org/10.6117/kmeps.2016.23.2.001
- A. Sharma, H. R. Sohn, and J. P. Jung, "Effect of Graphene Nanoplatelets on Wetting, Microstructure, and Tensile Characteristics of Sn-3.0Ag-0.5Cu (SAC) Alloy", Metall. Mater. Trans. A., 47A, 494 (2016).
- M. Ding, G Wang, B. Chao, P. S. Ho, P. Su, and T. Uehling, "Effect of contact metallization on electromigration reliability of Pb-free solder joints", J. Appl. Phys., 99, 094906 (2006). https://doi.org/10.1063/1.2193037
- S. H. Kim, B. R. Lee, G. T. Park, J. M. Kim, S. Yoo, and Y. B. Park, "Effects of PCB surface finishes on the Mechanical and Electrical Reliabilities f Sn-0.7Cu Pb-free Solder Bump", Korean J. Met. Mater., 53(10), 735 (2015). https://doi.org/10.3365/KJMM.2015.53.10.735
-
L. C. Tsao, "Suppressing effect of 0.5 wt.% nano-
$TiO_2$ addition into Sn-3.5Ag-0.5Cu solder alloy on the intermetallic growth with Cu substrate during isothermal aging", J. Alloys Compd., 509, 8441 (2011). https://doi.org/10.1016/j.jallcom.2011.05.116 -
A. K. Gain, Y. C. Chan, and W. K. C. Yung, "Effect of additions of
$ZrO_2$ nano-particles on the microstructure and shear strength of Sn-Ag-Cu solder on Au/Ni metallized Cu pads", Microelectron. Reliab., 51, 2306 (2011). https://doi.org/10.1016/j.microrel.2011.03.042 -
T. H. Chuang, M. W. Wu, S. Y. Chang, S. F. Ping, and L. C. Tsao,"Strengthening mechanism of nano-
$Al_2O_3$ particles reinforced Sn3.5Ag0.5Cu lead-free solder", Journal of Materials Science: Materials in Electronics, 22(8), 1021 (2011) https://doi.org/10.1007/s10854-010-0253-1 - Y. D. Han, S. M. L. Nai, H. Y. Jing, L. Y. Xu, C. M. Tan, and J. Wei, "Development of a Sn-Ag-Cu solder reinforced with Ni-coated carbon nanotubes", Journal of Materials Science: Materials in Electronics, 22(3), 315 (2011) https://doi.org/10.1007/s10854-010-0135-6
- L. Zhang, and K. N. Tu, "Structure and properties of lead-free solders bearing micro and nano particles", Materials Science and Engineering R, 82, 1 (2014). https://doi.org/10.1016/j.mser.2014.06.001
- C. Lee, X. Wei, J. W. Kysar, and J. Hone, "Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene", Science, 321, 385 (2008). https://doi.org/10.1126/science.1157996
- S. H. Lee , D. H. Lee , W. J. Lee, and S. O. Kim, "Tailored Assembly of Carbon Nanotubes and Graphene", Adv. Funct. Mater., 21, 1338 (2011). https://doi.org/10.1002/adfm.201002048
- M. Sobhy, A. M. El-Refai, and A. Fawzy, "Effect of Graphene Oxide Nano-Sheets (GONSs) on thermal, microstructure and stress-strain characteristics of Sn-5 wt% Sb-1wt% Ag solder alloy", J. Mater. Sci.: Mater. Electron., 27, 2349 (2016). https://doi.org/10.1007/s10854-015-4032-x
- X. D. Liu, Y. D. Han, H. Y. Jing, J. Wei, and L. Y. Xu, "Effect of graphene nanosheets reinforcement on the performance of Sn-Ag-Cu lead-free solder", Mater. Sci. Eng. A, 562, 25 (2013). https://doi.org/10.1016/j.msea.2012.10.079
- L. Xu, L. Wang, H. Jing, X. Liu, J. Wei, and Y. Han, "Effects of graphene nanosheets on interfacial reaction of Sn-Ag-Cu solder joints", J. Alloys Compd., 650, 475 (2015). https://doi.org/10.1016/j.jallcom.2015.08.018
- D. Ma, and P. Wu, "Improved microstructure and mechanical properties for Sn-58Bi-0.7Zn solder joint by addition of graphene nanosheets", J. Alloys. Compd., 671, 127 (2016). https://doi.org/10.1016/j.jallcom.2016.02.093
- Y. H. Ko, J. D. Lee, T. Yoon, C. W. Lee, and T. S. Kim, "Controlling Interfacial Reactions and Intermetallic Compound Growth at the Interface of a Lead-free Solder Joint with Layer-by-Layer Transferred Graphene", ACS Appl. Mater. Interfaces, 8, 5679 (2016). https://doi.org/10.1021/acsami.5b11903
- JEP 154, "Guideline for Characterizing Solder Bump Electromigration under Constant Current and Temperature Stress", JEDEC, (2008)
- J. M. Kim, M. H. Jeong, S. H. Yoo, and Y. B. Park, "Effects of Surface Finishes and Current Stressing on Interfacial Reaction Characteristics of Sn-3.0Ag-0.5Cu Solder Bumps", J. Electron. Mater. 41, 791 (2012). https://doi.org/10.1007/s11664-011-1888-2
- J. M. Kim, M. H. Jeong, S. H. Yoo, C. W. Lee, and Y. B. Park, "Effects of Surface Finishes and loading Speeds on Shear Strength of Sn-3.0Ag-0.5Cu Solder Joints", Microelectronic Engineering, 89, 55 (2012). https://doi.org/10.1016/j.mee.2011.03.148
- H. P. Shin, B. W. Ahn, J. H. Ahn, J. G. Lee, K. S. Kim, D. H. Kim, and S. B. Jung, "Interfacial Reaction and Joint Strength of the Sn-58Bi Solder Paste with ENIG Surface Finished Substrate", J. of KWJS, 30, 64 (2012).
- J. H. Kim, and C. Y. Hyun, "Fabrication of Cu Flakes by Ball Milling of Sub-micrometer Spherical Cu Particles", J. Microelectron. Packag. Soc., 21(4), 133 (2014). https://doi.org/10.6117/kmeps.2014.21.4.133
- S. H. Kim, J. H. Kim, S. H. Yoo, and Y. B. Park, "Effects of Surface Finishes and Current Stressing on the Interfacial Reaction Characteristics of Sne1.2Age0.7Cue0.4In Solder Bumps", Curr. Appl. Phys., 13, S103 (2013). https://doi.org/10.1016/j.cap.2013.01.002
- C. E. Ho, R. Y. Tsai, Y. L. Lin, and C. R. Kao, "Effect of Cu Concentration on the Reactions between Sn-Ag-Cu Solders and Ni", J. Electron. Mater., 31(6), 584 (2002). https://doi.org/10.1007/s11664-002-0129-0
- C. K. Lin, Y. W. Chang, and C. Chen, "Experimental and Simulation Analysis of Concave-down Resistance Curve During Electromigration in Solder Joints", J. Appl. Phys., 115, 083707 (2014). https://doi.org/10.1063/1.4867048
- J. H. Lee, and Y. B. Park, "Abnormal Failure Behavior of Sn-3.5Ag Solder Bumps Under Excessive Electric Current Stressing Conditions", J. Electron. Mater., 38(10), 2194 (2009). https://doi.org/10.1007/s11664-009-0855-7
- M. H. Chu, S. W. Liang, C. Chen, and A. T. Huang, "Electromigration Failure Mechanism in Sn-Cu Solder Alloys with OSP Cu Surface Finish", J. Electron. Mater., 41, 2502 (2012). https://doi.org/10.1007/s11664-012-2175-6
- S. H. Chae, J. Im, T. Uehling, and P. S. Ho, "Effects of UBM Thickness, Contact Trace Structure and Solder Joint Scaling on Electromigration Reliability of Pb-free solder Joints", Proc. 58th Electronic Components and Technology Conference (ECTC), Orlando, 354, IEEE Components, Packaging and Manufacturing Technology Society (CPMT) (2008).
- Y. Kim, S. Nagao, T. Sugahara, K. Suganuma, M. Ueshima, H. J. Albrecht, K. Wilke, and J. Strogies, "Refinement of the Microstructure of Sn-Ag-Bi-In Solder, by Addition of SiC Nanoparticles, to Reduce Electromigration Damage Under High Electric Current", J. Electron. Mater., 43, 4428 (2014). https://doi.org/10.1007/s11664-014-3377-x