참고문헌
- J. Y. Park, "Study on the analysis of wetting forces in the wetting balance curve and application to the prediction of solder joint geometry", in Ph.D. Thesis, Seoul National University, Seoul (2000).
- M. F. Arenas, and V. L. Acoff, "Contact angle measurements of Sn-Ag and Sn-Cu lead-free solders on copper substrates", J. Electron. Mater., 33(12), 1452 (2004). https://doi.org/10.1007/s11664-004-0086-x
- S. M. Hong, J. Y. Park, C. S. Kang, and J. P. Jung, "Fluxless wetting properties of UBM-coated Si-wafer to Sn-3.5wt%Ag solder", IEEE Trans. Compon. Packag. Technol., 26(1), 255 (2003). https://doi.org/10.1109/TADVP.2002.807622
- D. H. Jung, and J. P. Jung, "Review of the wettability of solder with a wetting balance test for recent advanced microelectronic pacakaging", Crit. Rev. Solid State Mater. Sci., 44(4), 324 (2018). https://doi.org/10.1080/10408436.2018.1490249
- L. G. Earle, "A quantitative study of soft soldering by means of the Kollagraph", J. I. Met., 7(6)1, 45 (1945).
- J. Y. Park, C. S. Kang, and J. P. Jung, "The analysis of the withdrawal force curve of the wetting curve using 63Sn-37Pb and 96.5Sn-3.5Ag eutectic solders", J. Electron. Mater., 28(11), 1256 (1999). https://doi.org/10.1007/s11664-999-0165-0
- J. L. Jellison, D. R. Johnson, and F. M. Hosking, "Statistical interpretation of meniscograph solderability tests", IEEE Transactions on Parts, Hybrids, and Packaging, 12(2), 126 (1976). https://doi.org/10.1109/TPHP.1976.1135115
- C. Lea, and W. A. Dench, Quantitative solderability measurement of electronic components Part 2: An Index of solderability", Solder. Surf. Mount Tech., 2(1), 14 (1990). https://doi.org/10.1108/eb037702
- A. Mayhew, and K. Monger, "Solderability by Meniscometry", Proc. Internepcon, 53 (1972).
- I. Artaki, A. M. Jackson, and P. T. Vianco, "Evaluation of lead-free solder joints in electronic assemblies", J. Electron. Mater., 23(8), 757 (1994). https://doi.org/10.1007/BF02651370
- W. Gasior, Z. Moser, J. Pstrus, K. Bukat, R. Kisiel, and J. Sitek, "(Sn-Ag)eut + Cu soldering materials, Part I: Wettability studies", J. Phase Equilib. Diff., 25(2), 115 (2003). https://doi.org/10.1007/s11669-004-0003-2
- J. I. Lee, S. W. Chen, H. Y. Chang, and C. M. Chen, "Reactive wetting between molten Sn-Bi and Ni substrate", J. Electron. Mater., 32(3), 117 (2003). https://doi.org/10.1007/s11664-003-0181-4
- JFE Techno-Research Corporation, "Solder wettability test", http://www.jfe-tec.co.jp/en/electronic-component/case/case03.html
- K. M. Martorano, M. A. Martorano, and S. D. Brandi, "Optimal conditions for the wetting balance test", J. Mater. Process. Tech., 209(6), 3091 (2009).
- C. B. Lee, S. B.Jung, Y. E. Shin, and C. C. Shur, "The effect of Bi concentration on wettability of Cu substrate by Sn-Bi solders", Mater. Trans., 42(5), 751 (2001). https://doi.org/10.2320/matertrans.42.751
- https://en.wikipedia.org/wiki/Restriction_of_Hazardous_Substances_Directive
- https://en.wikipedia.org/wiki/Waste_Electrical_and_Electronic_Equipment_Directive
- https://en.wikipedia.org/wiki/End_of_Life_Vehicles_Directive
-
X. Zhao, Y. Wen, Y. Li, Y. Liu, and Y. Wang, "Effect of
${\gamma}$ -$Fe_2O_3$ nanoparticles size on the properties of Sn-1.0Ag-0.5Cu nano-composite solders and joints", J. Alloy. Compd., 662, 272 (2016). https://doi.org/10.1016/j.jallcom.2015.11.213 -
Y. Li, X. C. Zhao, Y. Liu, Y. Wang, and Y. Wang, "Effect of
$TiO_2$ addition concentration on the wettability and intermetallic compounds growth of Sn-3.0Ag-0.5Cu-$xTiO_2$ nanocomposite solders", Journal of Materials Science: Materials in Electronics, 25(9), 3816 (2014). https://doi.org/10.1007/s10854-014-2094-9 - A. Sharma, H. R. Sohn, and J. P. Jung, "Effect of graphene nanoplatelets on wetting, microstructure, and tensile characteristics of Sn-3.0Ag-0.5Cu (SAC) alloy", Metall. Mater. Trans. A., 47(1), 494 (2016). https://doi.org/10.1007/s11661-015-3214-8
- D. H. Jung, A. Sharma, D. U. Lim, J. H. Yun, and J. P. Jung, "Effects of AlN nanoparticles on the microstructure, solderability, and mechanical properties of Sn-Ag-Cu solder", Metall. Mater. Trans. A., 48(9), 4372 (2017). https://doi.org/10.1007/s11661-017-4178-7
- Y. Gu, Y. Liu, X. Zhao, S. Wen, H. Li, and Y. Wang, "Effects of Cobalt nanoparticles addition on shear strength, wettability and interfacial intermetallic growth of Sn-3.0Ag-0.5Cu solder during thermal cycling", Materials Science Forum, 815, 97 (2015). https://doi.org/10.4028/www.scientific.net/MSF.815.97
- X. Jiachen, X. Songbai, L. Dongxue, W. He, and X. Peng, "Effect of Ga on the inoxidizability and wettability of Sn-0.5Ag-0.7Cu-0.05Pr solder", Adv. Mater. Sci. Eng., 1 (2017).
- S. M. Hong, J. Y. Park, C. B. Park, and J. P. Jung, C. S. Kang, "A study on the wetting properties of UBM-coated Si-wafer", J. Microelectron. Packag. Soc., 7(2), 55 (2000).
- S. J. Lee, and J. P. Jung, "Lead-free solder technology and reliability for automotive electronics", J. Microelectron. Packag. Soc., 22(3), 1 (2015). https://doi.org/10.6117/kmeps.2015.22.3.001