DOI QR코드

DOI QR Code

Effects of shear keys on seismic performance of an isolation system

  • Wei, Biao (School of Civil Engineering, Central South University) ;
  • Li, Chaobin (School of Civil Engineering, Central South University) ;
  • Jia, Xiaolong (School of Civil Engineering, Central South University) ;
  • He, Xuhui (School of Civil Engineering, Central South University) ;
  • Yang, Menggang (School of Civil Engineering, Central South University)
  • 투고 : 2019.01.12
  • 심사 : 2019.04.26
  • 발행 : 2019.09.25

초록

The shear keys are set in a seismic isolation system to resist the long-term service loadings, and are cut off to isolate the earthquakes. This paper investigated the influence of shear keys on the seismic performance of a vertical spring-viscous damper-concave Coulomb friction isolation system by an incremental dynamic analysis (IDA) and a performance-based assessment. Results show that the cutting off process of shear keys should be simulated in a numerical analysis to accurately predict the seismic responses of isolation system. Ignoring the cutting off process of shear keys usually leads to untrue seismic responses in a numerical analysis, and many of them are unsafe for the design of isolated structure. And those errors will be increased by increasing the cutting off force of shear keys and decreasing the spring constant of shear keys, especially under a feeble earthquake. The viscous damping action postpones the cutting off time of shear keys during earthquakes, and reduces the seismic isolation efficiency. However, this point can be improved by increasing the spring constant of shear keys.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundations of China, Natural Science Foundations of Hunan Province

참고문헌

  1. Antonyuk, E.Y. and Plakhtienko, N.P. (2004), "Dynamic modes of one seismic-damping mechanism with frictional bonds", Int. Appl. Mech., 40(6), 702-708. https://doi.org/10.1023/B:INAM.0000041399.99257.b3.
  2. Begley, C.J. and Virgin, L.N. (1998), "Impact response and the influence of friction", J. Sound Vib., 211(5), 801-818. https://doi.org/10.1006/jsvi.1997.1389.
  3. Chung, L.L., Kao, P.S., Yang, C.Y., Wu, L.Y. and Chen, H.M. (2015), "Optimal frictional coefficient of structural isolation system", J. Vib. Control, 21(3), 525-538. https://doi.org/10.1177/1077546313487938.
  4. Cui, S. (2012), "Integrated design methodology for isolated floor systems in single-degree-of-freedom structural fuse systems", Ph.D. Dissertation, State University of New York, Buffalo.
  5. Fahjan, Y. and Ozdemir, Z. (2008), "Scaling of earthquake accelerograms for non-linear dynamic analysis to match the earthquake design spectra", Proceedings of the 14th World Conference on Earthquake Engineering, Chinese Society for Earthquake Engineering, Beijing, China.
  6. Flom, D.G. and Bueche, A.M. (1959), "Theory of rolling friction for spheres", J. Appl. Phys., 30(11), 1725-1730. https://doi.org/10.1063/1.1735043
  7. Guerreiro, L., Azevedo, J. and Muhr, A.H. (2007), "Seismic tests and numerical modeling of a rolling-ball isolation system", J. Earthq. Eng., 11(1), 49-66. https://doi.org/10.1080/13632460601123172.
  8. Harvey, P.S. and Gavin, H.P. (2013), "The nonholonomic and chaotic nature of a rolling isolation system", J. Sound Vib., 332(14), 3535-3551. https://doi.org/10.1016/j.jsv.2013.01.036.
  9. Harvey, P.S. and Gavin, H.P. (2014), "Double rolling isolation systems: a mathematical model and experimental validation", Int. J. Nonlinear Mech., 61(1), 80-92. https://doi.org/10.1016/j.ijnonlinmec.2014.01.011.
  10. Harvey, P.S. and Gavin, H.P. (2015), "Assessment of a rolling isolation system using reduced order structural models", Eng. Struct., 99, 708-725. https://doi.org/10.1016/j.engstruct.2015.05.022.
  11. Harvey, P.S., Wiebe, R. and Gavin, H.P. (2013), "On the chaotic response of a nonlinear rolling isolation system", Physica D: Nonlinear Phenomena, 256-257, 36-42. https://doi.org/10.1016/j.physd.2013.04.013.
  12. Harvey, P.S., Zehil, G.P. and Gavin, H.P. (2014), "Experimental validation of a simplified model for rolling isolation systems", Earthq. Eng. Struct. D., 43(7), 1067-1088. https://doi.org/10.1002/eqe.2387.
  13. Ismail, M. (2015), "An isolation system for limited seismic gaps in near-fault zones", Earthq. Eng. Struct. D., 44(7), 1115-1137. https://doi.org/10.1002/eqe.2504.
  14. Ismail, M. and Casas, J.R. (2014), "Novel isolation device for protection of cable-stayed bridges against near-fault earthquakes", J. Bridge Eng., 19(8), 50-65. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000509.
  15. Ismail, M., Rodellar, J. and Pozo, F. (2014), "An isolation device for near-fault ground motions", Struct. Control Health Monit., 21(3), 249-268. https://doi.org/10.1002/stc.1549.
  16. Ismail, M., Rodellar, J. and Pozo, F. (2015), "Passive and hybrid mitigation of potential near-fault inner pounding of a selfbraking seismic isolator", Soil Dynam. Earthq. Eng., 69(2), 233-250. https://doi.org/10.1016/j.soildyn.2014.10.019.
  17. Jangid, R.S. (2000), "Stochastic seismic response of structures isolated by rolling rods", Eng. Struct., 22(8), 937-946. https://doi.org/10.1016/S0141-0296(99)00041-3.
  18. Jangid, R.S. and Londhe, Y.B. (1998), "Effectiveness of elliptical rolling rods for base isolation", J. Struct. Eng., 124(4), 469-472. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:4(469).
  19. JTJ004-89, Standard of the Ministry of Communications of P.R. China (1989), Specifications of Earthquake Resistant Design for Highway Engineering, China Communications Press, Beijing, China (in Chinese).
  20. Kosntantinidis, D. and Makris, N. (2009), "Experimental and analytical studies on the response of freestanding laboratory equipment to earthquake shaking", Earthq. Eng. Struct. D., 38(6), 827-848. https://doi.org/10.1002/eqe.871.
  21. Kurita, K., Aoki, S., Nakanishi, Y., Tominaga, K. and Kanazawa, M. (2011), "Fundamental characteristics of reduction system for seismic response using friction force", J. Civil Eng. Architect., 5(11), 1042-1047.
  22. Lee, G.C., Ou, Y.C., Niu, T.C., Song, J.W. and Liang, Z. (2010), "Characterization of a roller seismic isolation bearing with supplemental energy dissipation for highway bridges", J. Struct. Eng., 136(5), 502-510. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000136.
  23. Lewis, A.D. and Murray, R.M. (1995), "Variational principles for constrained systems: Theory and experiment", Int. J. Nonlinear Mech., 30(6), 793-815. https://doi.org/10.1016/0020-7462(95)00024-0
  24. Nanda, R.P., Agarwal, P. and Shrikhande, M. (2012), "Base isolation system suitable for masonry buildings", Asian J. Civil Eng. (Building and Housing), 13(2), 195-202.
  25. Ortiz, N.A., Magluta, C. and Roitman, N. (2015), "Numerical and experimental studies of a building with roller seismic isolation bearings", Struct. Eng. Mech., 54(3), 475-489. http://dx.doi.org/10.12989/sem.2015.54.3.475.
  26. Ou, Y.C., Song, J.W. and Lee, G.C. (2010), "A parametric study of seismic behavior of roller seismic isolation bearings for highway bridges", Earthq. Eng. Struct. D., 39(5), 541-559. https://doi.org/10.1002/eqe.958.
  27. Siringoringo, D.M. and Fujino, Y. (2015), "Seismic response analyses of an asymmetric base-isolated building during the 2011 Great East Japan (Tohoku) Earthquake", Struct. Control Health Monit., 22(1), 71-90. https://doi.org/10.1002/stc.1661.
  28. Tsai, C.S., Lin, Y.C., Chen, W.S. and Su, H.C. (2010), "Tridirectional shaking table tests of vibration sensitive equipment with static dynamics interchangeable-ball pendulum system", Earthq. Eng. Eng. Vib., 9(1), 103-112. https://doi.org/10.1007/s11803-010-9009-4.
  29. Wang, S.J., Hwang, J.S., Chang, K.C., Shiau, C.Y., Lin, W.C., Tsai, M.S., Hong, J.X. and Yang, Y.H. (2014), "Sloped multi-roller isolation devices for seismic protection of equipment and facilities", Earthq. Eng. Struct. D., 43(10), 1443-1461. https://doi.org/10.1002/eqe.2404.
  30. Wang, Y.J., Wei, Q.C., Shi, J. and Long, X.Y. (2010), "Resonance characteristics of two-span continuous beam under moving high speed trains", Latin Am. J. Solids Struct., 7(2), 185-199. http://dx.doi.org/10.1590/S1679-78252010000200005.
  31. Wei, B., Wang, P., He X.H. and Jiang, L.Z. (2018), "Seismic isolation characteristics of a friction system", J. Test. Eval., 46(4), 1411-1420. DOI: 10.1520/JTE20160598.
  32. Wei, B., Wang, P., He, X.H. and Jiang, L.Z. (2018), "The impact of the convex friction distribution on the seismic response of a spring-friction isolation system", KSCE J. Civil Eng., 22(4), 1203-1213. https://doi.org/10.1007/s12205-017-0938-6.
  33. Wei, B., Yang, T. H., Jiang, L.Z. and He, X.H. (2018), "Effects of uncertain characteristic periods of ground motions on seismic vulnerabilities of a continuous track-bridge system of highspeed railway", Bull. Earthq. Eng., 16(9), 3739-3769. https://doi.org/10.1007/s10518-018-0326-8.
  34. Wei, B., Yang, T. H., Jiang, L.Z. and He, X.H. (2018), "Effects of friction-based fixed bearings on the seismic vulnerability of a high-speed railway continuous bridge", Adv. Struct. Eng., 21(5), 643-657. https://doi.org/10.1177/1369433217726894.
  35. Wei, B., Zhuo, Y., Li, C.B. and Yang, M.G. (2019), "Parameter optimization of a vertical spring-viscous damper-Coulomb friction system", J. Shock Vib., doi: 10.1155/2019/5764946.
  36. Wei, B., Zuo, C.J., He, X.H. and Hu, Q.Y. (2019), "Earthquake isolation of a spring-damper-friction system with a convex friction distribution", J. Test. Eval., 2019, doi:10.1520/JTE20170275.
  37. Wei, B., Zuo, C.J., He, X.H., Jiang, L.Z. and Wang T. (2018), "Effects of vertical ground motions on seismic vulnerabilities of a continuous track-bridge system of high-speed railway", Soil Dynam. Earthq. Eng., 115, 281-290. https://doi.org/10.1016/j.soildyn.2018.08.022.
  38. Yim, C.S., Chopra, A.K. and Penzien, J. (1980), "Rocking response of rigid blocks to earthquakes", Earthq. Eng. Struct. D., 8(6), 565-587. https://doi.org/10.1002/eqe.4290080606.

피인용 문헌

  1. A Numerical Investigation on Scaling Rolling Friction Effects in Shaking Table Model Tests vol.2019, 2019, https://doi.org/10.1155/2019/7473031
  2. Equivalence of Friction and Viscous Damping in a Spring-Friction System with Concave Friction Distribution vol.49, pp.1, 2020, https://doi.org/10.1520/jte20190885
  3. Influence of ground motion duration and isolation bearings on the seismic response of base-isolated bridges vol.222, 2020, https://doi.org/10.1016/j.engstruct.2020.111129
  4. Influence of pier height on the effectiveness of seismic isolation of friction pendulum bearing for single-track railway bridges vol.28, pp.2, 2021, https://doi.org/10.12989/sss.2021.28.2.213