DOI QR코드

DOI QR Code

Active control to reduce the vibration amplitude of the solar honeycomb sandwich panels with CNTRC facesheets using piezoelectric patch sensor and actuator

  • Amini, Amir (Department of Control, Faculty of Computer and Electrical Engineering, University of Kashan) ;
  • Mohammadimehr, M. (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Faraji, A.R. (Department of Control, Faculty of Computer and Electrical Engineering, University of Kashan)
  • 투고 : 2019.04.22
  • 심사 : 2019.06.15
  • 발행 : 2019.09.10

초록

Active control of solar panels with honeycomb core and carbon nanotube reinforced composite (CNTRC) facesheets for smart structures using piezoelectric patch sensor and actuator to reduce the amplitude of vibration is a lack of the previous study and it is the novelty of this research. Of active control elements are piezoelectric patches which act as sensors and actuators in many systems. Their low power consumption is worth mentioning. Thus, deriving a simple and efficient model of piezoelectric patch's elastic, electrical, and elastoelectric properties would be of much significance. In the present study, first, to reduce vibrations in composite plates reinforced by carbon nanotubes, motion equations were obtained by the extended rule of mixture. Second, to simulate the equations of the system, up to 36 mode shape vectors were considered so that the stress strain behavior of the panel and extent of displacement are thoroughly evaluated. Then, to have a more acceptable analysis, the effects of external disturbances (Aerodynamic forces) and lumped mass are investigated on the stability of the system. Finally, elastoelectric effects are examined in piezoelectric patches. The results of the present research can be used for micro-vibration suppression in satellites such as solar panels, space telescopes, and interferometers and also to optimize active control panel for various applications.

키워드

과제정보

연구 과제 주관 기관 : University of Kashan

참고문헌

  1. Aglietti, G.S., Gabriel, S.B., Langley, R.S. and Rogers, E. (1997), "A modeling technique for active control design studies with application to spacecraft microvibrations", J. Acoust. Soc. Am., 102(4), 2158-2166. https://doi.org/10.1121/1.419631
  2. Aglietti, G.S., Langley, R.S., Rogers, E. and Gabriel, S.B. (2000), "An efficient model of an equipment loaded panel for active control design studies", J. Acoust. Soc. Am., 108(4), 1663-1673. https://doi.org/10.1121/1.1287844
  3. Aglietti, G.S., Stoustrup, J., Langley, R.S., Rogers, E. and Gabriel, S.B. (2002), "Modelling and feedback control of microvibrations", In: The Institution of Electrical Engineers, pp. 241-274.
  4. Aglietti, G.S., Langley, R.S., Rogers, E. and Gabriel, S.B. (2004), "Model building and verification for active control of microvibrations with probabilistic assessment of the effects of uncertainties", Proceedings of the Institution of Mechanical Engineers, Part C: J. Mech. Eng. Sci., 218(4), 389-399. https://doi.org/10.1177/095440620421800404
  5. Arani, A.G. and Kiani, F. (2018), "Nonlinear free and forced vibration analysis of microbeams resting on the nonlinear orthotropic visco-Pasternak foundation with different boundary conditions", Steel Compos. Struct., Int. J., 28(2), 149-165. https://doi.org/10.12989/scs.2018.28.2.149
  6. Arani, A.G., Hashemian, M., Loghman, A. and Mohammadimehr, M. (2011), "Study of dynamic stability of the double-walled carbon nanotube under axial loading embedded in an elastic medium by the energy method", J. Appl. Mech. Tech. Phys., 52(5), 815-824. https://doi.org/10.1134/S0021894411050178
  7. Aydin, M.R. and Gundogdu, O. (2018), "Vibration analysis of honeycomb sandwich composites filled with polyurethane foam by Taguchi Method", Steel Compos. Struct., Int. J., 28(4), 461-470. https://doi.org/10.12989/scs.2018.28.4.461
  8. Bui, T.Q., Khosravifard, A., Zhang, C., Hematiyan, M.R. and Golub, M.V. (2013), "Dynamic analysis of sandwich beams with functionally graded core using a truly meshfree radial point interpolation method", Eng. Struct., 47, 90-104. https://doi.org/10.1016/j.engstruct.2012.03.041
  9. Chhabra, D., Chandna, P. and Bhushan, G. (2011), "Design and analysis of smart structures for active vibration control using piezo-crystals", Int. J. Eng. Technol., 1(3), 153-163.
  10. Daouadji, T.H., Benferhat, R. and Adim, B. (2016), "A novel higher order shear deformation theory based on the neutral surface concept of FGM plate under transverse load", Adv. Mater. Res., Int. J., 5(2), 107-120. https://doi.org/10.12989/amr.2016.5.2.107
  11. Daraji, A.H., Hale, J.M. and Ye, J. (2017), "New methodology for optimal placement of piezoelectric sensor/actuator pairs for active vibration control of flexible structures", J. Vib. Acoust., 140(1), 011015. https://doi.org/10.1115/1.4037510
  12. Do, T.V., Bui, T.Q., Yu, T.T., Pham, D.T. and Nguyen, C.T. (2017), "Role of material combination and new results of mechanical behavior for FG sandwich plates in thermal environment", J. Computat. Sci., 21, 164-181. https://doi.org/10.1016/j.jocs.2017.06.015
  13. Emdadi, M., Mohammadimehr, M. and Navi, B.R. (2019), "Free vibration of an annular sandwich plate with CNTRC facesheets and FG porous cores using Ritz method", Adv. Nano Res., Int. J., 7(2), 109-123. https://doi.org/10.12989/anr.2019.7.2.109
  14. Fang, Y., Fei, J. and Hu, T. (2018), "Adaptive backstepping fuzzy sliding mode vibration control of flexible structure", J. Low Frequency Noise Vib. Active Control, 37(4), 1079-1096. https://doi.org/10.1016/j.jocs.2017.06.015
  15. Han, Y. and Elliott, J. (2007), "Molecular dynamics simulations of the elastic properties of polymer/carbon nanotube composites", Computat. Mater. Sci., 39(2), 315-323. https://doi.org/10.1016/j.commatsci.2006.06.011
  16. He, X., He, W., Chen, Y., Mu, X., Yu, Y. and Sun, C. (2018), "Boundary control of flexible aircraft wings for vibration suppression", Int. J. Control, 10, 1-10. https://doi.org/10.1080/00207179.2018.1442025
  17. Kim, B.J. and Lee, D.G. (2008), "Characteristics of joining inserts for composite sandwich panels", Compos. Struct., 86(1), 55-60. https://doi.org/10.1016/j.compstruct.2008.03.020
  18. Kumar, K.R. and Narayanan, S. (2008), "Active vibration control of beams with optimal placement of piezoelectric sensor/actuator pairs", Smart Mater. Struct., 17(5), 055008. https://doi.org/10.1088/0964-1726/17/5/055008
  19. Kumar, R., Dey, T. and Panda, S.K. (2019), "Instability and vibration analyses of FG cylindrical panels under parabolic axial compressions", Steel Compos. Struct., Int. J., 31(2), 187-199. https://doi.org/10.12989/scs.2019.31.2.187
  20. Lin, H. and Cao, D.Q. (2018), "A unified Gram-Schmidt-Ritz formulation for vibration and active flutter control analysis of honeycomb sandwich plate with general elastic support", J. Vibroeng., 20(5), 1982-2000. https://doi.org/10.1088/0964-1726/17/5/055008
  21. Malekzadeh, M., Naghash, A. and Talebi, H.A. (2012), "Robust attitude and vibration control of a nonlinear flexible spacecraft", Asian J. Control, 14(2), 553-563. https://doi.org/10.1002/asjc.332
  22. Marynowski, K. (2012), "Dynamic analysis of an axially moving sandwich beam with viscoelastic core", Compos. Struct., 94(9), 2931-2936. https://doi.org/10.1016/j.compstruct.2012.03.040
  23. Mohammadimehr, M. and Mehrabi, M. (2017), "Stability and free vibration analyses of double-bonded micro composite sandwich cylindrical shells conveying fluid flow", Appl. Math. Model., 47, 685-709. https://doi.org/10.1016/j.apm.2017.03.054
  24. Mohammadimehr, M. and Rahmati, A.H. (2013), "Small scale effect on electro-thermo-mechanical vibration analysis of single-walled boron nitride nanorods under electric excitation", Turkish J. Eng. Environ. Sci., 37(1), 1-15.
  25. Mohammadimehr, M. and Shahedi, S. (2017), "High-order buckling and free vibration analysis of two types sandwich beam including AL or PVC-foam flexible core and CNTs reinforced nanocomposite face sheets using GDQM", Compos. Part B: Eng., 108, 91-107. https://doi.org/10.1016/j.compositesb.2016.09.040
  26. Mohammadimehr, M., Navi, B.R. and Arani, A.G. (2016a), "Dynamic stability of MSGT sinusoidal viscoelastic piezoelectric polymeric FG-SWNT reinforced nanocomposite plate considering surface stress and agglomeration effects under hydro-thermo-electro-magneto-mechanical loadings", Mech. Adv. Mater. Struct., 24(16), 1325-1342. http://dx.doi.org/10.1080/15376494.2016.1227507
  27. Mohammadimehr, M., Rostami, R. and Arefi, M. (2016b), "Electro-elastic analysis of a sandwich thick plate considering FG core and composite piezoelectric layers on Pasternak foundation using TSDT", Steel Compos. Struct., Int. J., 20(3), 513-543. https://doi.org/10.12989/scs.2016.20.3.513
  28. Mohammadimehr, M., Zarei, H.B., Parakandeh, A. and Arani, A.G. (2017a), "Vibration analysis of double-bonded sandwich microplates with nanocomposite facesheets reinforced by symmetric and un-symmetric distributions of nanotubes under multi physical fields", Struct. Eng. Mech., Int. J., 64(3), 361-379. https://doi.org/10.12989/sem.2017.64.3.361
  29. Mohammadimehr, M., Monajemi, A.A. and Afshari, H. (2017b), "Free and forced vibration analysis of viscoelastic damped FGCNT reinforced micro composite beams", Microsyst. Technol., 1-15. https://doi.org/10.1007/s00542-017-3682-4
  30. Mohammadimehr, M., Shahedi, S. and Rousta Navi, B. (2017c), "Nonlinear vibration analysis of FG-CNTRC sandwich Timoshenko beam based on modified couple stress theory subjected to longitudinal magnetic field using generalized differential quadrature method", Proceedings of the Institution of Mechanical Engineers, Part C: J. Mech. Eng. Sci., 231(20), 3866-3885. https://doi.org/10.1177/0954406216653622
  31. Mohammadimehr, M., Mohammadi-Dehabadi, A.A., Akhavan Alavi, S.M., Alambeigi, K., Bamdad, M., Yazdani, R. and Hanifehlou, S. (2018a), "Bending, buckling, and free vibration analyses of carbon nanotube reinforced composite beams and experimental tensile test to obtain the mechanical properties of nanocomposite", Steel Compos. Struct., Int. J., 29(3), 405-422. https://doi.org/10.12989/scs.2018.29.3.405
  32. Mohammadimehr, M., Okhravi, S.V. and Akhavan Alavi, S.M. (2018b), "Free vibration analysis of magneto-electro-elastic cylindrical composite panel reinforced by various distributions of CNTs with considering open and closed circuits boundary conditions based on FSDT", J. Vib. Control, 24(8), 1551-1569. https://doi.org/10.1177/1077546316664022
  33. Murray, R.M. (2006), Lecture 2 - LQR Control, California Institute of Technology Control and Dynamical Systems.
  34. Nadirian, N., Biglari, H. and Hamed, M.A. (2017), "LQG vibration control of sandwich beams with transversely flexible core equipped with piezoelectric patches", J. Computat. Appl. Res. Mech. Eng. (JCARME), 7(1), 85-97. http://dx.doi.org/10.22061/JCARME.2017.643
  35. Nasihatgozar, M., Khalili, S.M.R. and Fard, K.M. (2017), "General equations for free vibrations of thick doubly curved sandwich panels with compressible and incompressible core using higher order shear deformation theory", Steel Compos. Struct., Int. J., 24(2), 151-176. https://doi.org/10.12989/scs.2017.24.2.151
  36. Nguyen, K., Thai, H.T. and Vo, T. (2015), "A refined higher-order shear deformation theory for bending, vibration and buckling analysis of functionally graded sandwich plates", Steel Compos. Struct., Int. J., 18(1), 91-120. http://dx.doi.org/10.12989/scs.2015.18.1.091
  37. Nguyen, D.K. and Tran, T.T. (2018), "Free vibration of tapered BFGM beams using an efficient shear deformable finite element model", Steel Compos. Struct., Int. J., 29(3), 363-377. https://doi.org/10.12989/scs.2018.29.3.363
  38. Niu, W., Zou, C., Li, B. and Wang, W. (2019), "Adaptive vibration suppression of time-varying structures with enhanced FxLMS algorithm", Mech. Syst. Signal Process., 118, 93-107. https://doi.org/10.1016/j.ymssp.2018.08.009
  39. Qiu, Z. and Ling, D. (2014), "Finite element modeling and robust vibration control of two-hinged plate using bonded piezoelectric sensors and actuators", Acta Mechanica Solida Sinica, 27(2), 146-161. https://doi.org/10.1016/S0894-9166(14)60025-2
  40. Rajabi, J. and Mohammadimehr, M. (2019), "Bending analysis of a micro sandwich skew plate using extended Kantorovich method based on Eshelby-Mori-Tanaka approach", Comput. Concrete, Int. J., 23(5), 361-376. https://doi.org/10.12989/cac.2019.23.5.361
  41. Rashad, M., Wahab, Mostafa M.A. and Yang, T.Y. (2019), "Experimental and numerical investigation of RC sandwich panels with helical springs under free air blast loads", Steel Compos. Struct., Int. J., 30(3), 217-230. https://doi.org/10.12989/scs.2019.30.3.217
  42. Selim, B.A., Zhang, L.W. and Liew, K.M. (2017), "Active vibration control of CNT-reinforced composite plates with piezoelectric layers based on Reddy's higher-order shear deformation theory", Compos. Struct., 163, 350-364. https://doi.org/10.1016/j.compstruct.2016.11.011
  43. Sharma, S., Vig, R. and Kumar, N. (2015), "Active vibration control: considering effect of electric field on PZT patches", Smart Struct. Syst., Int. J., 16(6), 1091-1105. https://doi.org/10.12989/sss.2015.16.6.1091
  44. Shen, H.S. and Xiang, Y. (2012), "Nonlinear vibration of nanotube-reinforced composite cylindrical shells in thermal environments", Comput. Methods Appl. Mech. Eng., 213-216, 196-205. https://doi.org/10.1016/j.cma.2011.11.025
  45. Tahouneh, V. (2017), "Vibration and mode shape analysis of sandwich panel with MWCNTs FG-reinforcement core", Steel Compos. Struct., Int. J., 25(3), 347-360. https://doi.org/10.12989/scs.2017.25.3.347
  46. Xu, S., Cui, N., Fan, Y. and Guan, Y. (2018a), "Active vibration suppression of flexible spacecraft during attitude maneuver with actuator dynamics", IEEE Access, 6, 35327-35337. https://doi.org/10.1109/ACCESS.2018.2851665
  47. Xu, Y., Li, Z. and Guo, K. (2018b), "Active vibration robust control for FGM beams with piezoelectric layers", Struct. Eng. Mech., Int. J., 67(1), 33-43. https://doi.org/10.12989/sem.2018.67.1.033
  48. Yazdani, R., Mohammadimehr, M. and Navi, B.R. (2019), "Free vibration of Cooper-Naghdi micro saturated porous sandwich cylindrical shells with reinforced CNT face sheets under magneto-hydro-thermo-mechanical loadings", Struct. Eng. Mech., Int. J., 70(3), 351-365. https://doi.org/10.12989/sem.2019.70.3.351
  49. Zenkour, A.M. and Aljadani, M.H. (2018), "Mechanical buckling of functionally graded plates using a refined higher-order shear and normal deformation plate theory", Adv. Aircraft Spacecr. Sci., Int. J., 5(6), 615-632. https://doi.org/10.12989/aas.2018.5.6.615

피인용 문헌

  1. Optimal placement of piezoelectric actuator/senor patches pair in sandwich plate by improved genetic algorithm vol.26, pp.6, 2019, https://doi.org/10.12989/sss.2020.26.6.721
  2. Computer modeling to forecast accurate of efficiency parameters of different size of graphene platelet, carbon, and boron nitride nanotubes: A molecular dynamics simulation vol.27, pp.2, 2019, https://doi.org/10.12989/cac.2021.27.2.111
  3. Computer simulation for stability analysis of the viscoelastic annular plate with reinforced concrete face sheets vol.27, pp.4, 2019, https://doi.org/10.12989/cac.2021.27.4.369
  4. Computer simulation for stability performance of sandwich annular system via adaptive tuned deep learning neural network optimization vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.083