DOI QR코드

DOI QR Code

동적 특성이 고려된 역해석를 이용한 적층 복합재료 내부의 탄소섬유 프리프레그의 물성 예측

Prediction of Material Properties of Carbon Fiber Prepreg in the Laminated Composite Using Reverse Analysis with Dynamic Characteristics

  • Hwang, Mun-Young (Department of Mechatronics Engineering, and LANL-CBNU Engineering Institute-Korea, Chonbuk National University) ;
  • Kang, Lae-Hyong (Department of Mechatronics Engineering, Department of Flexible and Printable Electronics, and LANL-CBNU Engineering Institute-Korea, Chonbuk National University)
  • 투고 : 2019.03.25
  • 심사 : 2019.08.26
  • 발행 : 2019.08.31

초록

이미 제작된 복합재료 제품을 분석하여 층별로 어떤 기계적 물성을 가지는지 알아낼 수 있다면, 기존 제품에 비해 더 좋은 성능을 내는 복합재료 개발을 수행할 수 있게 된다. 본 연구에서는 프리프레그를 적층하여 제작된 복합재료 구조물에 대해 역설계 기법을 적용하여 내부 프리프레그 층의 물성을 계산하고자 하였다. 단순히 인장시험으로 얻어지는 물리량을 이용한 경우와 인장시험 및 모드 해석을 통해 얻어지는 물리량을 이용한 경우를 비교한 결과 후자의 정확도가 더 높음을 알 수 있었다. 최종적으로 예측된 $E_1$의 최대 오차는 0.09%였고 예측된 $E_2$의 최대 오차는 7%였다.

If what the mechanical properties according to a layer have was found out by analyzing the already fabricated composite, it could be possible to develop the composite of the better performance than the existing products. In this study, we tried to calculate the mechanical properties of the inner prepreg lamina by applying the reverse design technique to the composite structure made by laminating prepregs. When the physical quantities obtained by the simple tensile test are used alone and the physical quantities obtained by the tensile test and the mode analysis are used at the same time, the results of this study show that the accuracy of the latter is higher Finally, the maximum error of $E_1$ predicted was 0.09% and the maximum error of predicted $E_2$ was 7%.

키워드

참고문헌

  1. Mahmood, M.S., and Davood, R., "Analysis and Optimization of a Composite Leaf Spring," Composite structures, Vol. 60, No. 3, 2003, pp. 317-325. https://doi.org/10.1016/S0263-8223(02)00349-5
  2. Choi, B.H., Lee, J.B., and Choi, B.K., "A Study on the Hysteresis Characteristics and Finite Element Analysis of FRP Leaf Spring," Journal of Advance Engineering Technology, Vol. 2, No. 2, 2009, pp. 291-298.
  3. Kim, C.-S., and Park, S.-Y., "Diesel Engine Intake Port Analysis Using Reverse-engineering Technique," Transactions of the Korean Society of Automotive Engineers, Vol. 23, No. 5, 2009, pp. 502-507. https://doi.org/10.7467/KSAE.2015.23.5.502
  4. Roos, T.H., Quin, R.L., De Beer, F.C., and Nshimirimana, R.M., "Neutron Tomography as a Reverse Engineering Method Applied to the IS-60 Rover Gas Turbine," Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 651, No. 1, 2011, pp. 329-335.
  5. Dubravcik, M., and Kender, S., "Application of Reverse Engineering Techniques in Mechanics System Services," Procedia Engineering, Vol. 48, 2012, pp. 96-104. https://doi.org/10.1016/j.proeng.2012.09.491
  6. Gameros, A., De Chiffre, L., Siller, H., Hiller, J., and Genta, G., "A Reverse Engineering Methodology for Nickel Alloy Turbine Blades with Internal Features," CIRP Journal of Manufacturing Science and Technology, Vol. 9, 2015, pp. 116-124. https://doi.org/10.1016/j.cirpj.2014.12.001
  7. Oh, S., Chang, B., and Ro, Y., "A Study on the Appropriateness of Virtual Machine for Reverse Engineering," Transactions of the Korean Society of Automotive Engineers, Vol. 22, No. 6, 2014, pp. 31-38. https://doi.org/10.7467/KSAE.2014.22.6.031
  8. Kim, Y.-W., Kim, J.-H., and Jeong, K.-S., "Crash FE Analysis of Front Side Assembly for Reverse Engineering," Transactions of the Korean Society of Automotive Engineers, Vol. 15, No. 1, 2007, pp. 89-98.
  9. Gibson, R.F., Principles of Composite Material Mechanics, CRC press, Ohio State Uni., USA, 2011.
  10. Moon, J.B., Kim, J.H., Jang, H.K., and Park, J.S., "A Study on Calculation of Composites Lamina Material Properties through Reverse Engineering of Light Weight Composite Carbody," Transactions of KSAE, Vol. 25, No. 1, 2017, pp. 1-10. https://doi.org/10.7467/KSAE.2017.25.1.001
  11. Lee, Y.-K., Lim, D.-J., Yoon, H.-S., Kim, M.-H., and Kim, C.-H., "Behavior for 2 Ply Rubber/Cord Laminates," Composites Research, Vol. 16, No. 4, 2003, pp. 1-9.
  12. Hwang, Y.-T., Lim, J.-Y., Nam, B.-G., and Kim, H.-S., "Analytical Prediction and Validation of Elastic Behavior of Carbon- Fiber-Reinforced Woven Composites," Composites Research, Vol. 31, No. 5, 2018, pp. 276-281. https://doi.org/10.7234/COMPOSRES.2018.31.5.276
  13. Voyiadjis, G.Z., and Kattan, P.I., Mechanics of Composite Materials with MATLAB, Springer Science & Business Media, Louisiana State Uni., USA, 2005.
  14. Zebdi, O., Boukhili, R., and Trochu, F., "An Inverse Approach Based on Laminate Theory to Calculate the Mechanical Properties of Braided Composites," Journal of Reinforced Plastics and Composites, Vol. 28, No. 23, 2009, pp. 2911-2930. https://doi.org/10.1177/0731684408094063
  15. Sztefek, P., and Olsson, R., "Nonlinear Compressive Stiffness in Impacted Composite Laminates Determined by an Inverse Method," Composites Part A: Applied Science and Manufacturing, Vol. 40, No. 3, 2009, pp. 260-272. https://doi.org/10.1016/j.compositesa.2008.12.002
  16. Standard, A. S. T. M., "Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials," American Society of Testing and Materials D3039/D M 3039, 2008.