한국가시화정보학회지 (Journal of the Korean Society of Visualization)

  • 제17권2호
  • /
  • Pages.73-82
  • /
  • 2019
  • /
  • 1598-8430(pISSN)
  • /
  • 2093-808X(eISSN)
한국가시화정보학회 (The Korean Society of Visualization)
권호 표지
DOI QR코드

DOI QR Code

원통형 펌프 흡입정 벽면에서 발생하는 수중 보텍스 제어

Control of Subsurface Vortex on Cylindrical Sump Wall

  • Park, Young Kyu (Research Institute of Industrial Science & Technology, Pukyong National University) ;
  • Jeon, Joon Ho (Department of Mechanical Design Engineering, Pukyong National University) ;
  • Lee, Yoen Won (Department of Mechanical Design Engineering, Pukyong National University)
  • 투고 : 2019.07.30
  • 심사 : 2019.08.23
  • 발행 : 2019.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The subsurface vortex - which occurs inside the cylindrical sump - was visualized through Computational Fluid Dynamics (CFD) and experiment. The analysis of subsurface vortex inside the cylindrical sump was already carried out using CFD techniques by the first author. To understand the subsurface vortex more clearly, an experimental analysis was carried out with a 1/5th scale model; and the flow rate was calculated according to the similarity law. The experimental results of vortex visualization matches well with the CFD results. The surface roughness model and Anti Vortex Device (AVD) model have been investigated to control the subsurface vortex. For the case of average surface roughness of 1mm and 5mm, the subsurface vortex appears and the vorticity is higher when compared to that of a smooth surface condition. However, for the AVD model, the subsurface vortex is completely removed and the internal flow is stabilized.

키워드

참고문헌

  1. American National Standard for Rotodynamic Pumps for Pump Intake Design, ANSI/HI 9.8-2012
  2. Anwar, O. H., Weller, A. J. and Amphlett, B. M., 1977, "SIMILARITY OF FREE-VORTEX AT HORIZONTAL INTAKE", Journal of Hydraulic Research, Vol. 16(2), pp. 95-105. https://doi.org/10.1080/00221687809499623
  3. Rajendran, B. P., Constantinescu, S. G. and Patel, V. C., 1999, "EXPERIMENTAL VALIDATION OF NUMERICAL MODEL OF FLOW IN PUMP-INTAKE BAYS", Journal of Hydraulic Engineering, Vol. 125(11), pp. 1119-1125 https://doi.org/10.1061/(ASCE)0733-9429(1999)125:11(1119)
  4. Park, Y. K., Li, K. M., Choi, Y. H. and Lee, Y. W., 2011, "Visualization of Air Absorption Induced by Free Surface Vortex in the Pump Sump Using Multi-phase Flow Simulation", Journal of Korean Society of Visualization, Vol. 9(3), pp. 59-64. https://doi.org/10.5407/JKSV.2011.9.3.059
  5. Dury, T. V., 2004, "CFD Design Support at PSI for the International MEGAPIE Liquid-Metal Spallation Target", Journal of NUCLEAR SCIENCE and TECHNOLOGY, Vol. 41(3), pp. 285-295. https://doi.org/10.1080/18811248.2004.9715487
  6. Lee, C. M. and Choi, Y. D., 2007, "Comparison of thermo-hydraulic performances of large scale vortex flow (LSVF) and small scale vortex flow (SSVF) mixing vanes in $17\times17$ nuclear rod bundle", Nuclear Engineering and Design, Vol. 237, pp. 2322-2331 https://doi.org/10.1016/j.nucengdes.2007.04.011
  7. Mochizuki, H., 2007, "Inter-subassembly heat transfer of sodium cooled fast reactors: Validation of the ETFLOW code", Nuclear Engineering and Design, Vol. 237, pp. 2040-2053 https://doi.org/10.1016/j.nucengdes.2007.03.023
  8. Rogozhkin, S. A., Osipov, S. L., Sobolev, V. A., Shepelev, S. F., Kozhaev, A. A., Mavrin, M. S. and Ryabov, A. A., 2014, "Computational and Experimental Studies Substantiating Setups for Localizing Fast-Reactor Melted Fuel", Atomic Energy, Vol. 115(6), pp. 416-421 https://doi.org/10.1007/s10512-014-9804-5
  9. Parthasarathy, U., Sundararajan, T., Balaji, C. and Velusamy, K., 2012, "Development of a porous body model for decay heat removal studies in a pool type sodium cooled fast reactor", International Journal of Advances in Engineering Sciences, Vol. 4(3), pp. 202-216
  10. Jeong, J., Park, J. and Han, H., 2008, "Head Loss Coefficient Evaluation Based on CFD Analysis for PWR Downcomer and Lower Plenum", Heat Transfer Engineering, Vol. 29(8), pp. 677-684 https://doi.org/10.1080/01457630801980640
  11. Natesan, K., Kasinathan, N., Velusamy, K., Selvaraj, P., Chellapandi, P. and Chetal, S.C., 2006, "Thermal hydraulic investigations of primary coolant pipe rupture in an LMFBR", Nuclear Engineering and Design, Vol. 236, pp. 1165-1178 https://doi.org/10.1016/j.nucengdes.2005.10.019
  12. Velusamy, K., Chellapandi, P., Chetal, S. C. and Raj, B., 2010, "Overview of pool hydraulic design of Indian prototype fast breeder reactor", sadhana, Vol. 35, Part 2, pp. 97-128 https://doi.org/10.1007/s12046-010-0022-0
  13. Park, Y. K., Choi, Y. H., Han, J. W., Jung, Y. H., Kim, H. J., and Lee, Y. W., 2018, "Study on Vortex Control Around Pump Intake in a Circular Pump Station", Trans. Korea Soc. Mech. Eng. B, Vol. 42(1), pp. 27-33 https://doi.org/10.3795/KSME-B.2018.42.1.027
  14. Schlichting, H., and Gersten, K., 1997, "Grenzschicht-Theorie", 9. Auflage, Springer-Verlag Berlin, Heidelberg, New York
  15. H. Schlichting., 1979, "Boundary Layer Theory", McGraw-Hill