DOI QR코드

DOI QR Code

기체-고체 유동층에서 사이클론과 프리보드의 형상이 고체 비산 손실에 미치는 영향

Effects of Cyclone and Freeboard Geometry on Solid Entrainment Loss in a Gas-Solid Fluidized Bed

  • 투고 : 2019.07.23
  • 심사 : 2019.08.31
  • 발행 : 2019.08.31

초록

Effects of cyclone and freeboard geometry on solid entrainment loss were investigated with two different types of cyclones and bubbling beds in a gas-solid fluidized bed system. The solid entrainment loss was measured by collected fines during continuous solid circulation condition. Bubbling bed which has an expanded freeboard showed less solid entrainment than the bubbling bed which has a straight freeboard. The cyclone which has a wide gas-solid mixture inlet showed less solid entrainment loss than the cyclone which has a narrow gas-solid mixture inlet. Moreover, the cyclone has a wide gas-solid mixture inlet can capture smaller particles.

키워드

참고문헌

  1. D. Lee, D. Shun, D. H. Bae, H. J. Ryu, and J. I. Baek, "Solid Circulation Characteristics of Two Lower Loop Seals with Two Kinds of Particles in a Circulating Fluidized Bed System", Journal of Chemical Engineering of Japan, Vol. 52, No. 1, 2019, pp. 106-110, doi: https://doi.org/10.1252/jcej.18we057.
  2. H. Ryu, D. Lee, M. Jang, J. Kim, and J. I. Baek, "Conceptual Design and Feasibility Study on 0.5 MWth Pressurized Chemical Looping Combustor", Trans. of Korean Hydrogen and New Energy Society, Vol. 27, No. 2, 2016, pp. 201-210, doi: https://doi.org/10.7316/KHNES.2016.27.2.201.
  3. H. J. Ryu, H. S. Kim, S. Y. Lee, D. H. Lee, and J. C. Kim, "Effects of Operating Variables on Sorption Capacity of $CO_2$ Absorbents for SEWGS Process", Korean Chem. Eng. Res., Vol. 50, No. 6, 2012, pp. 994-1001, doi: http://dx.doi.org/10.9713/kcer.2012.50.6.994.
  4. K. Kim, S. Yang, J. B. Lee, T. H. Eom, C. K. Ryu, H. J. Lee, T. S. Bae, Y. B. Lee, and S. J. Lee, "A Log-term Test of a New $CO_2$ Sorbent (KEP-CO2P2) in a 0.5 $MW_e\;CO_2$ Capture Test Bed", Korean J. Chem. Eng., Vol. 32, No. 4, 2015, pp. 677-684, doi: http://dx.doi.org/10.1007/s11814-014-0297-7.
  5. H. J. Ryu, S. H. Jo, S. Y. Lee, D. Lee, H. Nam, B. W. Hwang, H. Kim, J. Kim, and J. I. Bark, "Solid Circulation and Reaction Characteristics of Mass Produced Particle in a 0.5 MWth Chemical Looping Combustion System", Trans. of Korean Hydrogen and New Energy Society, Vol. 30, No. 2, 2019, pp. 170-177, doi: https://doi.org/10.7316/KHNES.2019.30.2.170.
  6. H. Ryu, D. Lee, S. Lee, and G. Jin, "Attrition Characteristics of WGS Catalyst for SEWGS System", Trans. of Korean Hydrogen and New Energy Society, Vol. 25, No. 2, 2014, pp. 122-130, doi: http://dx.doi.org/10.7316/KHNES.2014.25.2.122.
  7. H. J. Ryu, D. Lee, H. Nam, S. H. Jo, and J. I. Baek, "Solid Circulation Characteristics of Two Oxygen Carriers for Chemical Looping Combustion System", Trans. of Korean Hydrogen and New Energy Society, Vol. 29, No. 4, 2018, pp. 393-400, doi: https://doi.org/10.7316/KHNES.2018.29.4.393.
  8. D. H. Lee, S. H. Jo, G. T. Jin, C. K. Yi, H. J. Ryu, and S. B. Park, "Comparison of Solid Circulation Characteristics with Change of Lower Loop Seal Geometry in a Circulating Fluidized Bed", Korean Chemical Engineering Research, Vol. 52, No. 4, 2014, pp. 522-529, doi: https://doi.org/10.9713/kcer.2014.52.4.522.
  9. J. Yoon, H. Kim, J. Kim, D. Lee, J. I. Baek, and H. J. Ryu, "Solid Circulation Characteristics of Oxygen Carrier for Chemical Looping Combustion System at Ambient Temperature and Pressure", Trans. of Korean Hydrogen and New Energy Society, Vol. 28, No. 4, 2017, pp. 384-391. doi: https://doi.org/10.7316/KHNES.2017.28.4.384.
  10. Y. S. Won, M. S. Khurram, A. R. Jeong, J. H. Choi, and H. J. Ryu, "Predicting the Transport Velocity by the Correlation on Particle Entrainment Rate in the Gas Fluidized-bed", Korean Chem. Eng. Res., Vol. 55, No. 5, 2017, pp. 638-645, doi: https://doi.org/10.9713/kcer.2017.55.5.638.