에너지공학 (Journal of Energy Engineering)

  • 제28권1호
  • /
  • Pages.1-9
  • /
  • 2019
  • /
  • 1598-7981(pISSN)
  • /
  • 2713-7074(eISSN)
한국에너지학회 (The Korean Society for Energy)
권호 표지
DOI QR코드

DOI QR Code

국내 탈황용 석회석의 분쇄성 지수 평가 및 응용

Evaluation and application of grinding index of domestic desulfurization limestone

  • 투고 : 2019.02.08
  • 심사 : 2019.03.11
  • 발행 : 2019.03.29
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

석탄 화력발전소의 배연탈황공정에서 탈황용 흡수제로 사용하는 석회석을 대상으로 본드의 분쇄일지수(BWI) 및 하드그로브지수(HGI) 측정 후 분쇄효율을 비교하였다. 측정결과, 국내 탈황용 석회석의 분쇄성지수는 HGI가 증가함에 따라 BWI가 감소하는 선형적인 반비례 관계를 확인할 수 있었으며, 석회석의 화학조성 및 채광위치에 따른 결정구조에 따라 분쇄효율의 차이가 발생하였다. 이에 따라, 석회석의 분쇄성을 측정할 경우 측정방법이 까다롭고 시간이 오래 걸리는 BWI 보다 간편하게 측정할 수 있는 HGI를 활용하여도 시료의 분쇄성 차이를 확인할 수 있을 것으로 사료되며, 분쇄 특성에 따른 석회석의 선택적 활용 시 탈황효율 또한 향상시킬 수 있을 것으로 판단된다.

In the flue gas desulfurization process of the coal-fired power plant, the grinding efficiencies of the limestone as the sorbent for desulfurization were compared after BWI and HGI measurements. As a result, the grinding index of the domestic desulfurization limestone were linear inversely proportional relationship with decreasing BWI was observed with increasing HGI. There was a difference in grinding efficiency depending on the chemical composition and crystal structure. Therefore, it is considered that when grinding ability of limestone is measured, the grinding property of the sample can be confirmed even by using HGI which can be measured more easily than BWI which is difficult to measure and takes a long time. The desulfurization efficiency can be improved by selective utilization of limestone depending on the crushing characteristics.

키워드

참고문헌

  1. Srivastava, R. K., Jozewicz, W., 2001, Flue Gas Desulfurization : The State of the Art, Journal of the Air and Waste Management Assiciation, Vol 51, No. 12, pp. 1676-1688 https://doi.org/10.1080/10473289.2001.10464387
  2. Angel, I., Javier, R., Immaculada, O., 1990, Thermal Dehydration of Calcium Hydroxide. 1. Kinetic Model and Parameters, Journal of Industrial and Engineering Chemistry, Vol. 29, No. 8, pp. 1599-1606 https://doi.org/10.1021/ie00104a004
  3. Lee, H., Cho, H. C., 2002, Determination of the Breakage Parameters on the Nonmetallic Minerals, Journal of Korean Society of Mineral and Energy Resources, Vol. 39, No. 4, pp. 248-256
  4. Cho, H. C., Jeong, S., 2005, A Characteristic Study of Ball Mill and Centrifugal Mill using Discrete Element Method, Journal of Korean Society of Mineral and Energy Resources, Vol. 42, No. 4, pp. 393-402.
  5. Bond, F. C., 1961, Crushing and Grinding Calculations ; Part 1. British Chemical Engineering, Vol. 6, No. 6, pp. 378-385
  6. Bond, F. C., 1952, The Third theroy of comminution, Transactions of the American Institute of Mining and Metallurgical Engineers, Vol. 193, No. 4, pp. 484-494
  7. The British Standards Institution., 1995, Methods for Analysis and testing of coal and coke, Determination of Hardgrove grindability index of hard coal (BS 1016-112), England
  8. Kong, B. S., Kim, Y. H., 2015, Grinding and equipment for limestone, Mineral science and industry, Vol. 18, No. 2, pp. 52-62
  9. Han, S. S. et al., 2018, Simulation of Grinding/Classification Circuit in Domestic Gold ore Processing Plant Using Energy-based Grinding Model and Mathematical Classification Model, Journal of Korean Society of Mineral and Energy Engineers, Vol. 55, No. 1, pp. 8-19. https://doi.org/10.12972/ksmer.2018.55.1.008
  10. Noh, J. H., Lee, N. K., 2007, Applied-mineralogical Study on the Grinding Effects and Powder Properties of High- Ca Limestone, Journal of the Korean Society of Mineral and Energy Resources Engineers, Vol. 44, No. 3, pp. 191-207
  11. Cho, J. S. et al., 2010, The Effect on Calcination and Hydration Properties of Different Grade Limestone in Danyang Area, Journal of the Korean Society of Mineral and Energy Resources Engineers, Vol. 47, No. 4, pp 487-495
  12. Geological Investigation Corps of Teabaeksan Regian in Korea (GICTR), 1962, Geological Investigation Report of Taebaeksan Regian, Journal of the Geological Society of Korea, p. 107
  13. Korea Institute of Geoscience and mineral resources(KIGAM), 2016, MEGO Geologic Information System, mego.kigam.re.kr
  14. Korea Industrial Standards Commission (KISC), 2002, Method for X-ray fluorescence spectrometric analysis of limestone and dolomite (KS E 3075), Korea
  15. Korea Agency for Technology and Standards (KATS), 2011, Testing method of grinding work index (KS E 3600), Korea
  16. Cuhadaroglu, A. D. et al., 2013, Characterization of the Grinding Behavior of Binary Mixtures of Clinker and Colemanite, Particulate Science and Technology, Vol. 31, No. 6, pp. 596-602 https://doi.org/10.1080/02726351.2013.806974
  17. American society for testing and materials (ASTM), 2008, Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method (ASTM D 409), USA
  18. American society for testing and materials (ASTM), 1987, Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size (ASTM D 4749), USA
  19. Korea Limestone Industry Cooperation (KLIC), 2015, Limestone for flue gas desulfurization (SPS-KLIC-004-775), Korea
  20. Ohliger, A., Forster, M., Kneer, R., 2013, Torrefaction of beechwood: a parametric study including heat of reaction and grindability, Fuel, Vol. 104, pp. 607-613 https://doi.org/10.1016/j.fuel.2012.06.112
  21. Raimie, H. H. et al., 2013, Physicochemical characterization of torrefied biomass, Journal of Analytical and Applied Pyrolysis, Vol. 103, pp. 21-30 https://doi.org/10.1016/j.jaap.2012.10.004
  22. Bond, F. C., 1955, How Does Rock Break?, The Scientific Monthly, Vol. 81, No. 4, pp. 196-198.
  23. Jung, M. Y., 2003, Development Trend of Mineral Powder Manufacturing Technology, Mineral science and industry, Vol. 16, No. 2, pp, 24-35
  24. Agus, F., Waters, P. L., 1971, Determination of the grindability of coals, shales and other minerals by a modified Hardgrove-machine method, Fuel, Vol. 50, No. 4, pp. 405-431 https://doi.org/10.1016/0016-2361(71)90029-9
  25. Park, S. S., Kim, K. H. and Park, S. Y., 1997, Grindability and Reactivity of Limestones for Flue Gas Desulfurization, Applied Chemistry, Vol. 1, No. 2, pp. 465-4680
  26. McIntyre, A., Plitt, L. R., 1980, Interrelationship between Bond and Hardgrove grindabilities. Canadian Institute of Mining and Metallurgy, Vol. 73, No. 818, pp. 149-155
  27. Hower, J. C., Barton, L. S., Moshier, S. O., 1992, Application of the Hardgrove grindability index in carbonate characterization, Minerals and Metallurgical Processing, Vol. 9, No. 3, pp. 146-150
  28. Frantisek, T., 2008, Contribution to determination of coal grindability using Hardgrove method, GeoScience Engineering, Vol. LIV, No. 1, pp. 27-32