한국전자통신학회논문지 (The Journal of the Korea institute of electronic communication sciences)

한국전자통신학회 (Korea Institute of Electronic Communication Science)
권호 표지
DOI QR코드

DOI QR Code

멀티 툴 조각기 및 기계 제어 소프트웨어 개발

Development of a Multi-tool Carving Machine and a Machine Control Software

  • 김응곤 (순천대학교 컴퓨터공학과)
  • Kim, Eung-Kon (Dept. of Computer Engineering, Sunchon National University)
  • 투고 : 2019.07.21
  • 심사 : 2019.08.15
  • 발행 : 2019.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문은 기존 열선조각기, 열선 커팅기, 스핀들을 통합한 멀티 툴 조각기 개발을 통해 복잡한 구조의 형상도 손쉽고 빠르게 제작할 수 있도록 하였다. 또한 G-Code가 단일 툴에만 적용되는 문제점을 해결하고 기존 3D 모델링 툴로써 관리할 수 없는 기계의 세부 동작들을 제어할 수 있도록 소프트웨어를 개발하였다.

In this paper, we developed the multi-tool carving machine which integrates the existing hot-wire carving machine, hot-wire cutting machine and spindle so that the shape of complex structure can be produced easily and quickly. We have also developed software that solves the problem that G-Code applies only to a single tool, and controls the details of the machine's operations that can not be managed with existing 3D modeling tools.

키워드

KCTSAD_2019_v14n4_755_f0001.png 이미지

그림 1. 다축 프레임 모형 Fig. 1 Multi-axis frame model

KCTSAD_2019_v14n4_755_f0002.png 이미지

그림 2. 툴 결합법 Fig. 2 Way to combine tools

KCTSAD_2019_v14n4_755_f0003.png 이미지

그림 3. 열선 조각 장치 개념도 Fig. 3 Concept of the hot-wire craving tool

KCTSAD_2019_v14n4_755_f0004.png 이미지

그림 4. 열선 조각 장치 응용도 Fig. 4 Application of the hot-wire craving tool

KCTSAD_2019_v14n4_755_f0005.png 이미지

그림 5. 툴 자동교환 헤드의 모형도 Fig. 5 Model of automatic tool exchange head

KCTSAD_2019_v14n4_755_f0006.png 이미지

그림 6. 소프트웨어 인터페이스 Fig. 6 Software interface

KCTSAD_2019_v14n4_755_f0007.png 이미지

그림 7. 프로그램 구조도 Fig. 7 Program structure chart

KCTSAD_2019_v14n4_755_f0008.png 이미지

그림 8. 주요 함수 알고리즘 Fig. 8 Main function algorithm

표 1. 프로그램 개발 도구 및 운영 환경 Table 1. Program development tools and operating environment

KCTSAD_2019_v14n4_755_t0001.png 이미지

참고문헌

  1. D. Cho, "A Study on the Influence of Macroeconomic Variables of the ADF Test Method Using Public Big Data on the Real Estate Market," J. of the Korean Institute of Electronic Communication Sciences, vol. 12, no. 3, 2017, pp. 499-506.
  2. G. Boo and S. Lee "An Experimental Study on the Effects of Chief Officer Endorsements in Ads for Local Governments : by Product and Proposition Types," J. The Korean Journal of Advertising, vol. 23, no. 6, 2012, pp. 107-131
  3. Y. Cha, H. Lee, and M. Shin, "A Study on the perception and demand for Advertising Education to foster advertising personnel and to improve understanding about advertising," J. The Korean Journal of Advertising, vol. 23, no. 5, 2012, pp. 255-276.
  4. P. Moon, "The Comparison and Analysis of Mobile Advertising Platform," J. of the Korean Institute of Electronic Communication Sciences, vol. 7, no. 3, 2012, pp. 515-520.
  5. J. Kim, "A Study on Necessity of Symbolic Sculpture According to City Image -Focused on Symbolic Sculpture of Gwangju," J. The Treatise on The Plastic Media, vol. 14, no. 4, 2011, pp. 45-54.
  6. W. Lee, T. Kim, and H. Jang, "An Inter-floor Noise Prevention System using an Open-source Controller," J. of the Korean Institute of Electronic Communication Sciences, vol. 12, no. 5, 2017, pp. 899-906.
  7. J. Kim and W. Oh, "A design method of the active noise controllers for the perceived noise reduction,"J. of the Korean Institute of Electronic Communication Sciences, vol. 14, no. 1, 2019, pp. 179-184.
  8. E. Kim, "Design of Integrated Control System for Combustion Type CO2 Generator with Solar Radiation Sensitiveness and Irrigation Supply," J. of the Korean Institute of Electronic Communication Sciences, vol. 12, no. 1, 2018, pp. 239-240.
  9. J. Seo and C. Kim, "Design and Implementation of Realtime Things Control System Using MQTT and WebSocket in IoT Environment," J. of the Korean Institute of Electronic Communication Sciences, vol. 12, no. 1, 2018, pp. 265-266.
  10. M. Yang, "A Development of CNC Engraving Machine System for Non-experts," J. Transactions of the Korean Society of mechanical engineers, vol. 41, no. 7, 2017, pp. 673-682.
  11. B. Kim and E. Kim, "The Development of a Multi-Tool Carving Machine and a Machine Control Software," J. of the The Korea Institute of Electronic Communication Sciences, Busan, South Korea, June 2019, pp. 265.