DOI QR코드

DOI QR Code

Active tuned tandem mass dampers for seismic structures

  • Li, Chunxiang (Department of Civil Engineering, Shanghai University) ;
  • Cao, Liyuan (Department of Civil Engineering, Shanghai University)
  • 투고 : 2019.03.27
  • 심사 : 2019.05.05
  • 발행 : 2019.08.25

초록

Motivated by a simpler and more compact hybrid active tuned mass damper (ATMD) system with wide frequency spacing (i.e., high robustness) but not reducing the effectiveness using the least number of ATMD units, the active tuned tandem mass dampers (ATTMD) have been proposed to attenuate undesirable oscillations of structures under the ground acceleration. Likewise, it is expected that the frequency spacing of the ATTMD is comparable to that of the active multiple tuned mass dampers (AMTMD) or the multiple tuned mass dampers (MTMD). In accordance with the mode generalised system in the specific vibration mode being controlled (simply referred herein to as the structure), the closed-form expression of the dimensionless displacement variances has been derived for the structure with the attached ATTMD. The criterion for the optimum searching may then be determined as minimization of the dimensionless displacement variances. Employing the gradient-based optimization technique, the effects of varying key parameters on the performance of the ATTMD have been scrutinized in order to probe into its superiority. Meanwhile, for the purpose of a systematic comparison, the optimum results of two active tuned mass dampers (two ATMDs), two tuned mass dampers (two TMDs) without the linking damper, and the TTMD are included into consideration. Subsequent to work in the frequency domain, a real-time Simulink implementation of dynamic analysis of the structure with the ATTMD under earthquakes is carried out to verify the findings of effectiveness and stroke in the frequency domain. Results clearly show that the findings in the time domain support the ones in the frequency domain. The whole work demonstrates that ATTMD outperforms two ATMDs, two TMDs, and TTMD. Thereinto, a wide frequency spacing feature of the ATTMD is its highlight, thus deeming it a high robustness control device. Furthermore, the ATTMD system only needs the linking dashpot, thus embodying its simplicity.

키워드

참고문헌

  1. Amini, F., Hazaveh, N.K. and Rad, A.A. (2013), "Wavelet PSObased LQR algorithm for optimal structural control using active tuned mass dampers", Comput. Aid. Civil Infrastr. Eng., 28(7), 542-557. https://doi.org/10.1111/mice.12017.
  2. Angelis, M.D., Perno, S. and Reggio, A. (2012), "Dynamic response and optimal design of structures with large mass ratio TMD", Earthq. Eng. Struct. Dyn., 41(1), 41-60. https://doi.org/10.1002/eqe.1117.
  3. Ankireddi, S. and Yang, H.T.Y. (1996), "Simple ATMD control methodology for tall buildings subject to wind loads", J. Struct. Eng., ASCE, 122(1), 83-91. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:1(83).
  4. Basu, B. and Nagarajaiah, S. (2008), "A wavelet-based timevarying adaptive LQR algorithm for structural control", Eng. Struct., 30(9) 2470-2477. https://doi.org/10.1016/j.engstruct.2008.01.011.
  5. Bekdas, G. and Nigdeli, S.M. (2013), "Mass ratio factor for optimum tuned mass damper strategies", Int. J. Mech. Sci., 71, 68-84. https://doi.org/10.1016/j.ijmecsci.2013.03.014.
  6. Cao, L. and Li, C. (2018), "Enhanced hybrid active tuned mass dampers for structures", Struct. Control Hlth. Monit., 25(2), e2067. https://doi.org/10.1002/stc.2067.
  7. Cao, L. and Li, C. (2019), "Tuned tandem mass dampers-inerters with broadband high effectiveness for structures under white noise base excitations", Struct. Control Hlth. Monit., 26(4), e2319. https://doi.org/ 10.1002/stc.2319.
  8. Carpineto, N., Lacarbonara, W. and Vestroni, F. (2014), "Hysteretic tuned mass dampers for structural vibration mitigation", J. Sound Vib., 333(5), 1302-1318. https://doi.org/10.1016/j.jsv.2013.10.010.
  9. Casalotti, A., Arena, A. and Lacarbonara, W. (2014), "Mitigation of post-flutter oscillations in suspension bridges by hysteretic tuned mass dampers", Eng. Struct., 69, 62-71. https://doi.org/10.1016/j.engstruct.2014.03.001.
  10. Chang, C.C. and Yang, H.T.Y. (1995), "Control of buildings using active tuned mass dampers", J. Eng. Mech., ASCE, 121(3), 355-366. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:3(355).
  11. Chang, J.C.H. and Soong, T.T. (1980), "Structural control using active tuned mass damper", J. Eng. Mech., ASCE, 106(6), 1091-1098.
  12. Chen, G. and Wu, J. (2001), "Optimal placement of multiple tuned mass dampers for seismic structures", J. Struct. Eng., ASCE, 127(9), 1054-1062. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1054).
  13. Chey, M.H., Chase, J.G., Mander, J.B. and Carr, A.J. (2010), "Semi-active tuned mass damper building systems: Design", Earthq. Eng. Struct. Dyn., 39(2), 119-139. https://doi.org/10.1002/eqe.934.
  14. Chung, L.L., Lai, Y.A., Yang, C.S.W., Lien, K.H. and Wu, L.Y. (2013), "Semi-active tuned mass dampers with phase control", J. Sound Vib., 332(15), 3610-3625. https://doi.org/10.1016/j.jsv.2013.02.008.
  15. Chung, L.L., Wu, L.Y., Walter Yang, C.S.W., Lien, K.H., Lin, M.C. and Huang, H.H. (2013), "Optimal design formulas for viscous tuned mass dampers in wind-excited structures", Struct. Control Hlth. Monit., 20(3), 320-336. https://doi.org/10.1002/stc.496.
  16. Collins, R., Basu, B. and Broderick, B. (2006), "Control strategy using bang-bang and minimax principle for FRF with ATMDs", Eng. Struct., 28(3), 349-356. https://doi.org/10.1016/j.engstruct.2005.08.012.
  17. Daniel, Y., Lavan, O. and Levy, R. (2012), "Multiple-tuned mass dampers for multimodal control of pedestrian bridges", J. Struct. Eng., ASCE, 138(9), 1173-1178. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000527.
  18. Dinh, V.N. and Basu, B. (2015), "Passive control of floating offshore wind turbine nacelle and spar vibrations by multiple tuned mass dampers", Struct. Control Hlth. Monit., 22(1), 152-176. https://doi.org/10.1002/stc.1666.
  19. Domaneschi, M., Martinelli, L. and Po, E. (2015), "Control of wind buffeting vibrations in a suspension bridge by TMD: Hybridization and robustness issues", Comput. Struct., 155, 3-17. https://doi.org/10.1016/j.compstruc.2015.02.031.
  20. Erduran, E. (2012), "Evaluation of Rayleigh damping and its influence on engineering demand parameter estimates", Earthq. Eng. Struct. Dyn., 41(14), 1905-1919. https://doi.org/10.1002/eqe.2164.
  21. Fitzgerald, B. and Basu, B. (2014), "Cable connected active tuned mass dampers for control of in-plane vibrations of wind turbine blades", J. Sound Vib., 333(23), 5980-6004. https://doi.org/10.1002/stc.1524.
  22. Fu, T.S. and Johnson, E.A. (2011), "Distributed mass damper system for integrating structural and environmental controls in buildings", J. Eng. Mech., ASCE, 137(3), 205-213. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000211.
  23. Gu, M., Xiang, H.F. and Chen, A.R. (1994), "A practical method of TMD for suppressing wind-induced vertical buffeting of long-span cable-stayed bridges and its application", J. Wind Eng. Ind. Aerodyn., 51(2), 203-213. https://doi.org/10.1016/0167-6105(94)90004-3.
  24. Guclu, R. and Yazici, H. (2008), "Vibration control of a structure with ATMD against earthquake using fuzzy logic controllers", J. Sound Vib., 318(1-2), 36-49. https://doi.org/10.1016/j.jsv.2008.03.058.
  25. Jangid, R.S. (1995), "Dynamic characteristics of structures with multiple tuned mass dampers", Struct. Eng. Mech., 3(5), 497-509. https://doi.org/10.12989/sem.1995.3.5.497.
  26. Jangid, R.S. (1999), "Optimum multiple tuned mass dampers for base-excited undamped system", Earthq. Eng. Struct. Dyn., 28(9), 1041-1049. https://doi.org/10.1002/(SICI)1096-9845(199909)28:9.
  27. Jokic, M., Stegic, M. and Butkovic, M. (2011), "Reduced-order multiple tuned mass damper optimization: A bounded real lemma for descriptor systems approach", J. Sound Vib., 330(22), 5259-5268. https://doi.org/10.1016/j.jsv.2011.06.005.
  28. Kaiming, B. and Hong, H. (2016), "Using pipe-in-pipe systems for subsea pipeline vibration control", Eng. Struct., 109, 75-84. https://doi.org/10.1016/j.engstruct.2015.11.018.
  29. Kareem, A. and Kline, S. (1995), "Performance of multiple mass dampers under random loading", J. Struct. Eng., ASCE, 121(2), 348-361. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:2(348).
  30. Kaveh, A., Mohammadi, Khademhosseini, S., Keyhani, O.A. and Kalatjari, V.R. (2015), "Optimum parameters of tuned mass dampers for seismic applications using charged system search", Iran. J. Sci. Tech., Trans. Civil Eng., 39(C1), 21-40.
  31. Kaveh, A., Pirgholizadeh, S. and Khademhosseini, O. (2015), "Semi-active tuned mass damper performance with optimized fuzzy controller using CSS algorithm", Asian J. Civil Eng., 16(5), 587-606.
  32. Lavan, O. (2017), "Multi-objective optimal design of tuned mass dampers", Struct. Control Hlth. Monit., 24(11), e2008. https://doi.org/10.1002/stc.2008.
  33. Leung, A.Y.T. and Zhang, H. (2009), "Particle swarm optimization of tuned mass dampers", Eng. Struc., 31, 715-728. https://doi.org/10.1016/j.engstruct.2008.11.017.
  34. Li, C and Cao, L. (2019). "High performance active tuned mass damper inerter for structures under the ground acceleration", Earthq. Struct., 16(2), 149-163. https://doi.org/10.12989/eas.2019.16.2.149.
  35. Li, C. (2000), "Performance of multiple tuned mass dampers for attenuating undesirable oscillations of structures under the ground acceleration", Earthq. Eng. Struct. Dyn., 29(9), 1405-1421. https://doi.org/10.1002/1096-9845(200009)29:9.
  36. Li, C. and Cao, B. (2015), "Hybrid active tuned mass dampers for structures under the ground acceleration", Struct. Control Hlth. Monit., 22(4), 757-773. https://doi.org/10.1002/stc.1716.
  37. Li, C. and Liu, Y. (2002), "Active multiple tuned mass dampers for structures under the ground acceleration", Earthq. Eng. Struct. Dyn., 31(5), 1041-1052. https://doi.org/10.1002/eqe.136.
  38. Li, C. and Liu, Y. (2002), "Further characteristics for multiple tuned mass dampers", J. Struct. Eng., ASCE, 128(10), 1362-1365. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:10(1362).
  39. Li, C. and Liu, Y. (2003), "Optimum multiple tuned mass dampers for structures under ground acceleration based on the uniform distribution of system parameters", Earthq. Eng. Struct. Dyn., 32(5), 671-690. https://doi.org/10.1002/eqe.239.
  40. Li, C. and Qu, W. (2006), "Optimum properties of multiple tuned mass dampers for reduction of translational and torsional response of structures subject to ground acceleration", Eng. Struct., 28(4), 472-494. https://doi.org/10.1016/j.engstruct.2005.09.003.
  41. Li, C. and Zhu, B. (2006), "Estimating double tuned mass dampers for structures under the ground acceleration using a novel optimum criterion", J. Sound Vib., 298(1-2), 280-297. https://doi.org/10.1016/j.jsv.2006.05.018.
  42. Li, C., Li, J. and Qu, Y. (2010), "An optimum design methodology of active tuned mass damper for asymmetric structures", Mech. Syst. Signal Pr., 24(3), 746-765. https://doi.org/10.1016/j.ymssp.2009.09.011.
  43. Li, C., Liu, Y. and Wang, Z. (2003), "Active multiple tuned mass dampers: a new control strategy", J. Struct. Eng., ASCE, 129(7), 972-977. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:7(972).
  44. Li, H.N., Zhang, P., Song, G., Patil, D. and Mo, Y. (2015), "Robustness study of the pounding tuned mass damper for vibration control of subsea jumpers", Smart Mater. Struct., 24(9), 095001. https://doi.org/10.1088/0964-1726/24/9/095001
  45. Lin, C.C., Lu, L.Y., Lin, G.L. and Yang, T.W. (2010), "Vibration control of seismic structures using semi-active friction multiple tuned mass dampers", Eng. Struct., 32(10), 3404-3417. https://doi.org/10.1016/j.engstruct.2010.07.014.
  46. Lin, C.C., Wang, J.F., Lien, C.H., Chiang, H.W. and Lin, C.S. (2010), "Optimum design and experimental study of multiple tuned mass dampers with limited stroke", Earthq. Eng. Struct. Dyn., 39(14), 1631-1651. https://doi.org/10.1002/eqe.1008.
  47. Lin, G.L., Lin, C.C., Chen, B.C. and Soong, T.T. (2015), "Vibration control performance of tuned mass dampers with resettable variable stiffness", Eng. Struct., 83, 187-197. https://doi.org/10.1016/j.engstruct.2014.10.041.
  48. Lin, G.L., Lin, C.C., Lu, L.Y. and Ho, Y.B. (2012), "Experimental verification of seismic vibration control using a semi-active friction tuned mass damper", Earthq. Eng. Struct. Dyn., 41(4), 813-830. https://doi.org/10.1002/eqe.1162.
  49. Lu, X. and Chen, J. (2011), "Mitigation of wind-induced response of Shanghai Center Tower by tuned mass damper", Struct. Des. Tall Spec. Build., 20(4), 435-452. https://doi.org/10.1002/tal.659.
  50. Lu, X. and Chen, J. (2011), "Parameter optimization and structural design of tuned mass damper for Shanghai center tower", Struct Des. Tall Spec Build., 20(4), 453-471. https://doi.org/10.1002/tal.649.
  51. Lu, X., Zhang, Q., Weng, D., Zhou, Z., Wang, S., Mahin, S.A., Ding, S. and Qian, F. (2017), "Improving performance of a super tall building using a new eddy-current tuned mass damper", Struct. Control Hlth. Monit., 24(3), e1882. https//doi:10.1002/stc.1882.
  52. Matta, E. (2013), "Effectiveness of tuned mass dampers against ground motion pulses", J. Struct. Eng., ASCE, 139(2), 188-198. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000629.
  53. Mohebbi, M., Shakeri, K., Ghanbarpour, Y. and Majzoub, H. (2013), "Designing optimal multiple tuned mass dampers using genetic algorithms (GAs) for mitigating the seismic response of structures", J. Vib. Control, 19(4), 605-625. https://doi.org/10.1177/1077546311434520.
  54. Nagarajaiah, S. (2009), "Adaptive passive, semi-active, smart tuned mass dampers: identification and control using empirical mode decomposition, Hilbert transform, and short-term Fourier transform", Struct. Control Hlth. Monit., 16(7-8), 800-841. https://doi.org/10.1002/stc.349.
  55. Nagarajaiah, S. and Sonmez, E. (2007), "Structures with semiactive variable stiffness single/ multiple tuned mass dampers", J. Struct. Eng., ASCE, 133(1), 67-77. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:1(67).
  56. Nagarajaiah, S. and Varadarajan, N. (2005), "Short time Fourier transform algorithm for wind response control of buildings with variable stiffness TMD", Eng. Struct., 27(3), 431-441. https://doi.org/10.1016/j.engstruct.2004.10.015.
  57. Nagashima, I. (2001), "Optimal displacement feedback control law for active tuned mass damper", Earthq. Eng. Struct. Dyn., 30(8), 1221-1242. https://doi.org/10.1002/eqe.60.
  58. Nishitani, A. and Inoue, Y. (2001), "Overview of the application of active/semi-active control to building structures in Japan", Earthq. Eng. Struct. Dyn., 30(11), 1565-1574. https://doi.org/10.1002/eqe.81.
  59. Ok, S.Y., Song, J. and Park, K.S. (2009), "Development of optimal design formula for bi-tuned mass dampers using multi-objective optimization", J. Sound Vib., 322(1-2), 60-77. https://doi.org/10.1016/j.jsv.2008.11.023.
  60. Reggio, A. and Angelis, M.D. (2015), "Optimal energy-based seismic design of non-conventional Tuned Mass Damper (TMD) implemented via inter-story isolation", Earthq. Eng. Struct. Dyn., 44(10), 1623-1642. https://doi.org/10.1002/eqe.2548.
  61. Shu, Z., Li, S., Zhang, J. and He, M. (2017), "Optimum seismic design of a power plant building with pendulum tuned mass damper system by its heavy suspended buckets", Eng. Struct., 136, 114-132. https://doi.org/10.1016/j.engstruct.2017.01.010.
  62. Si, Y., Karimi, H.R. and Gao, H. (2014), "Modelling and optimization of a passive structural control design for a spartype floating wind turbine", Eng. Struct., 69, 168-182. https://doi.org/10.1016/j.engstruct.2014.03.011.
  63. Song, G., Zhang, P., Li, L., Singla, M., Patil, D., Li, H.N. and Mo, Y. (2016), "Vibration control of a pipeline structure using pounding tuned mass damper", J. Eng. Mech., ASCE, 142(6), 04016031. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001078.
  64. Spanos, P.T.D. (1983), "Spectral moments calculation of linear system output", J. Appl. Mech., ASME, 50(4), 901-903. https://doi.org/10.1115/1.3167169.
  65. Spencer, B. and Nagarajaiah, S. (2003), "State of the art of structural control", J. Struct. Eng., ASCE, 129(7), 845-856. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:7(845).
  66. Stancioiu, D. and Ouyang, H. (2012), "Structural modification formula and iterative design method using multiple tuned mass dampers for structures subjected to moving loads", Mech. Syst. Signal Pr., 28, 542-560. https://doi.org/10.1016/j.ymssp.2011.11.009.
  67. Stewart, G.M. and Lackner, M.A. (2014), "The impact of passive tuned mass dampers and wind-wave misalignment on offshore wind turbine loads", Eng. Struct., 73, 54-61. https://doi.org/10.1016/j.engstruct.2014.04.045.
  68. Sun, C. (2018), "Semi-active control of monopile offshore wind turbines under multi-hazards", Mech. Syst. Signal Pr., 99, 285-305. https://doi.org/10.1016/j.ymssp.2017.06.016.
  69. Sun, C. and Nagarajaiah, S. (2014), "Study on semi-active tuned mass damper with variable damping and stiffness under seismic excitations", Struct. Control Hlth. Monit., 21(6), 890-906. https://doi.org/10.1002/stc.1620.
  70. Venanzi, I., Ubertini, F. and Materazzi, A.L. (2013), "Optimal design of an array of active tuned mass dampers for windexposed high-rise buildings", Struct. Control Hlth. Monit., 20(6), 903-917. https://doi.org/10.1002/stc.1502.
  71. Weber, F. (2014), "Semi-active vibration absorber based on realtime controlled MR damper", Mech. Syst. Signal Pr., 46(2-3), 272-288. https://doi.org/10.1016/j.ymssp.2014.01.017.
  72. Weber, F., Boston, C. and Maslanka, M. (2011), "An adaptive tuned mass damper based on the emulation of positive and negative stiffness with an MR damper", Smart Mater. Struct., 20(1), 015012. https://doi.org/10.1088/0964-1726/20/1/015012
  73. Xu, K. and Igusa, T. (1992), "Dynamic characteristics of multiple substructures with closely spaced frequencies", Earthq. Eng. Struct. Dyn., 21(12), 1059-1070. https://doi.org/10.1002/eqe.4290211203
  74. Yan, N., Wang, C.M. and Balendra, T. (1999), "Optimum damper characteristics of ATMD for buildings under wind loads", J. Struct. Eng., ASCE, 125(12), 1376-1383. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:12(1376).
  75. Yang, Y. and Li, C. (2017), "Performance of tuned tandem mass dampers for structures under the ground acceleration", Struct, Control Hlth. Monit., 24(10), e1974, https://doi.org/10.1002/stc.1974.
  76. Zhang, P., Song, G., Li, H.N. and Lin, Y.X. (2013), "Seismic control of power transmission tower using pounding TMD", J. Eng. Mech., ASCE, 139(10), 1395-1406. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000576.
  77. Zuo, L. and Nayfeh, S. (2005), "Optimization of the individual stiffness and damping parameters in multiple-tuned-massdamper systems", J. Vib. Acoust., ASME, 127(1), 77-83. https://doi.org/10.1115/1.1855929.

피인용 문헌

  1. Seismic performance analysis of rocking wall TMDs structure based on shaking table test vol.21, pp.1, 2019, https://doi.org/10.12989/eas.2021.21.1.023