Fig. 1. Block diagram of the wireless charger system
Fig. 2. Block diagram of the wireless charger system verification procedure
Fig. 3. Configuration of the PCB Circuit
Fig. 4. Configuration of the PCB model
Fig. 5. Configuration of the heat point PCB(HyperLynx)
Fig. 6. Configuration of the heat point PCB(FloTHERM)
Fig. 7. Configuration modeling for wireless Power charger system using FloTHERM
Fig. 8. Results of upper PCB thermal simulations using the HyperLynx Thermal
Fig. 9. Results of lower PCB thermal simulations using the HyperLynx Thermal
Fig. 10. Results of Upper and Lower PCB thermal Simulations using the FloTHERM
Fig. 11. Results of Wireless Charger system
Fig. 12. Result of transient thermal simulation until 120min
Fig. 13. Test setup to measure the temperature of the wireless charger device
Fig. 14. Comparison of result obtained from IR thermography measurements
Table 1. Simulation modeling conditions
Table 2. Simulation and experiment conditions
Table 3. Temperature Comparison
참고문헌
- T. A. Asghari, "PCB Thermal via optimization using design of experiments," IEEE Tr. Thermal and thermomechanical proceedings 10th intersociety conference, pp.224-228, 2006. DOI: https://dx.doi.org/10.1109/ITHERM.2006.1645346
- Yi. Wang, S. W. H de Haan and J. A. Ferreira "Thermal design guideline of PCB traces under DC and AC Current," IEEE Tr. Energy conversion congress and exposition, pp.1240-1246, 2009. DOI: https://dx.doi.org/10.1109/ECCE.2009.5316250
- S. C. Jang, M. S. Kweon and S. M. Han, "Heat Characteristics Analysis of Radiator for PCB-Board," Journal of the Korean Society for Power System Engineering, Vol.20, No.6, pp.20-26, 2016. DOI: https://doi.org/10.9726/kspse.2016.20.6.020
- S. C. Kim, B "Thermal Design and Analysis Evaluation of ISG Motor for Hybrid Electric Vehicles Considering High-speed Driving Condition," Transactions of KASE, Vol. 22, NO.1, pp.59-64, 2014. DOI: https://doi.org/10.7467/KSAE.2014.22.1.059
- K. J. Park, D. W. Kim "A study of Temperature Predictions for Manual Transmission Clutch System Via Anti-fade and Hill Start Virtual Test," Transactions of KASE, Vol. 23, NO.1, pp.122-129, 2015. Available From: DOI: https://doi.org/10.7467/KSAE.2015.23.1.122
- T. Y. Tom Lee, J. "Application of a CFD Tool for System-Level Thermal Simulation," IEEE Tr. Packaging and Manufacturing Technology, Vol.17, No.4, pp.564-572, 1994. DOI: https://dx.doi.org/10.1109/95.335043