Fig. 1. Comparison of Al and PP total heat transfer
Fig. 2. Heat exchaner shape of orthogonal and refraction type.
Fig. 3. Computational analysis results.
Fig. 4. Simulation result value of Orthogonal type.
Fig. 5. Simulation result value of Refraction type.
Table 1. Flat heat exchanger materials.
Table 2. Total heat transfer coefficient of Al and PP.
Table 3. Variables of analysis for Orthogonal type.
Table 4. Variables of analysis for Refraction type.
Table 5. Material properties.
References
- H. H. Hyeon. (2019). A Study on the Optimal Design Technology in the Medical Ventilation System. Master's thesis. Nambu University, GwangJu.
- R. Fehle, J. Klas, & F. Mayinger. (1995) Investigation of local heat transfer in compact heat exchangers by holgraphic interferometry. Experimental Thermal and Fluid Science, 10(2), 181-194. https://doi.org/10.1016/0894-1777(94)00088-P
- V. Saravanan & C. K. Umesh. (2017). Experimental investigation for flow and heat transfer over pin fin heat exchanger. International J. of Eng. Sci. & Reserach Tech., 6(12), 511-518.
- S. W. Choi, Y. H. Paik, H. C. Kang & D. Y. Kim. (1997). Calculation of a 2-D Channel Flow with a Dimple. J. of Mechanical engineering B, 21(1), 49-56.
- S. Y. Yoo, M. H. Chung & Y. M. Lee. (2005). A Study on the Factors Affecting the Performance of Plastic Plate Heat Exchanger. Korean Journal of Air-Conditioning and Refrigeration Eng., 17(9), 839-848.
- H. Zhao, Z. Liu, C. Zhang, N. Guan, & H. Zhao. (2016). Pressure drop and friction factor of a rectangular channel with staggered mini pin fins of different shapes. Experimental Thermal and fluid Sci., 71, 57-69. https://doi.org/10.1016/j.expthermflusci.2015.10.010
- C. A. Rubio-Jimenez, S. G. Kandlikar, & A. Hernandez-Guerrero. (2012). Numerical Analysis of Novel Micro Pin Fin Heat Sink With Variable Fin Density. IEEE Trans. On Components, Packaging And Manufacturing Giutechnology, 2(5), 825-833. https://doi.org/10.1109/TCPMT.2012.2189925
- Y. Kim & Y. Kim. (2005). Heat transfer characteristics of flat plate finned-tube heat exchangers with large fin pitch. Int. J. Refrig., 28(6), 851-858. https://doi.org/10.1016/j.ijrefrig.2005.01.013
- J. Yoo. (2012). Influence of Chevron Angle on Performance and Life-cycle of the Brazed Plate Heat Exchangers. Master's thesis. Chungnam National University. Chungnam.
- R. Borrajo-Pelaez, J. Ortega-Casanova & J. M. Cejudo-Lopez. (2010). A Three-Dimensional Numerical Study and Comparison Between the Air Side Model and the Air/Water Side Model of a Plain Fin-and-Tube Heat Exchanger. Appl Therm Engineering, 30(13), 1608-1615. https://doi.org/10.1016/j.applthermaleng.2010.03.018
- J. G. Cevallos, A. E. Bergles, A. B. Cohen, P. Rodgers & A. K. Gupta. (2012). Polymer Heat Exchangers- History, Opportunities, and Challenges. Heat Trans Eng, 33(13), 1075-1093. https://doi.org/10.1080/01457632.2012.663654
- G. Hetsroni & A. Moyak. (1994). Heat transfer and pressure drop in a plastic heat exchanger with triangular channels. Chemical Engineering and Processing, 33(2), 91-100. https://doi.org/10.1016/0255-2701(94)85007-0
- M. H. Chung. (2002). Study on the Heat Recovery Performance of Plastic and Paper Plate Heat Exchanger. Master's thesis. Chungnam National University. Chungnam
- K. Aydin, O. V. Guler & A. Kecebas. (2017). Parameters Affecting the Performance of a Plate Heat Exchanger using the CFD. Energy Research Journal. 8(2), 22-31 https://doi.org/10.3844/erjsp.2017.22.31
- J. H. Park. (2010). A Study on the Efficiency of a Heat Exchange by Simulator Experiment for an Aluminium Plate Heat Exchanger. Master's thesis. Tong-Myong University. Busan.