Fig. 1. Models A, B and C
Fig. 2. Constraint conditions of seat
Fig. 3. Total deformation at models
Fig. 4. Equivalent stress at models
Fig. 5. Mean stress correction theory
Fig. 6. Load histories at nonuniform fatigue loads
Fig. 7. Fatigue lives of models A, B and C
References
- G. W. Hwan & J. U. Cho. (2017). Analysis Study on the Damage of Crack Happening with the Bending at CFRP Plate due to Stacking Angle. Journal of the Korea Convergence Society, 8(3), 185-190. https://doi.org/10.15207/JKCS.2017.8.3.185
- G. G. Choi & J. U. Cho. (2018). A Convergence Study through Durability Analysis due to the Configuration of Automotive Frame Butted. Journal of the Korea Convergence Society, 9(11), 271-276. https://doi.org/10.15207/JKCS.2018.9.11.271
- J. W. Park & J. U. Cho. (2017). Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle. Journal of the Korea Convergence Society, 8(7), 231-236. https://doi.org/10.15207/JKCS.2017.8.7.231
- J. U. Cho.(2014). Analytical Study on Durability due to the Load of Artificial Knee Joint, Journal of the Korea Convergence Society 5(2), 7-11. https://doi.org/10.15207/JKCS.2014.5.2.007
- Y. K. Park & B. G. Lee. (2018). A Study on the Structural Analysis of the Spindle of Swiss Turn Type Lathe for Ultra Precision Convergence Machining. Journal of the Korea Convergence Society, 9(5), 145-150. https://doi.org/10.15207/JKCS.2018.9.5.145
- J. H. Lee & J. U. Cho. (2015). Study on the Convergent Life Evaluation due to the Bumper Configuration of Multipurpose Vehicle. Journal of the Korea Convergence Society, 6(5), 85-90. https://doi.org/10.15207/JKCS.2015.6.5.085
- Z. H. Wang., C. K. Chun & Y. C. Kwon. (2018). Study on Exhaust Air Heat Transfer Characteristics of Heat Exchange System for White Smoke Reduction. Journal of Korean Society of Mechanical Technology, 20(6), 739-744. https://doi.org/10.17958/ksmt.20.6.201812.739
- Y. S. Choi & Y. C. Kwon. (2019). An Experimental Study of Air-side Heat Transfer and Pressure Drop of Evaporator for Refrigerator Unit. Journal of Korean Society of Mechanical Technology, 21(1), 42-47. https://doi.org/10.17958/ksmt.21.1.201902.42
- S. W. Hwang. (2019). A Comparison Study of Performance due to the Oil-cooler Fin Shape for Diesel Engine using Numerical Analysis. Journal of Korean Society of Mechanical Technology, 21(1), 1-7. https://doi.org/10.17958/ksmt.21.1.201902.1
- B. M. Jang & D. H. Cho. (2019). A Study on the Flow Characteristics around Vertical Wall with Flap. Journal of Korean Society of Mechanical Technology, 21(2). 248-253. https://doi.org/10.17958/ksmt.21.2.201904.248
- H. J. Kang & H. S. Lee. (2019). A Study on Heating and Cooling Performance Characteristics of Heat Meter for Water Source Heat Pump System. Journal of Korean Society of Mechanical Technology, 21(2), 321-326. https://doi.org/10.17958/ksmt.21.2.201904.321
- J. S. Lee. (2018). Structural Analysis of a 24 Person Elevator Emergency Brake. Journal of the Korea Convergence Society, 9(12), 189-194. https://doi.org/10.15207/JKCS.2018.9.12.189
- J. W. Park & J. U. Cho. (2017). Convergence Study on Composite Material of Unidirectional CFRP and SM 45C Sandwich Type that Differs in Stacking Angle, Journal of the Korea Convergence Society, 8(7), 231-236. https://doi.org/10.15207/JKCS.2017.8.7.231
- J. I. Lee. (2017). The Convergence Design for Stiffness and Structure Advancement of Automotive Body. Journal of the Korea Convergence Society, 8(4), 189-197. https://doi.org/10.15207/JKCS.2017.8.4.189
- J. U. Cho. (2015). Study on Convergence Technique through Strength Analysis of Stabilizer Link by Type. Journal of the Korea Convergence Society, 6(1), 57-63. https://doi.org/10.15207/JKCS.2015.6.1.057
- M. K, Park & B. G. Lee. (2018). A Study on the Structural Analysis of the Spindle of Swiss Turn Type Lathe for Ultra Precision Convergence Machining. Journal of the Korea Convergence Society, 9(5), 145-150. https://doi.org/10.15207/JKCS.2018.9.5.145
- J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique through Structural Analysis due to the Configuration of Guitar. Journal of the Korea Convergence Society, 6(4), 9-14. https://doi.org/10.15207/JKCS.2015.6.4.009
- S. Y. Oh. (2012). A Traffic Hazard Prediction Algorithm for Vehicle Safety Communications on a highway. Journal of Digital Convergence, 10(9), 319-324. https://doi.org/10.14400/JDPM.2012.10.9.319
- K. H. Ko. (2018). An Estimating Algorithm of Vehicle Collision Speed Through Images of Blackbox. Journal of Digital Convergence, 16(9), 173-178. https://doi.org/10.14400/JDC.2018.16.9.173
- J. H. Hyeon, Y. H. Moon & S. W. Ha. (2018). Development of Automation Software for Corner Radius Analysis of Composite Laminated Structure. Journal of Convergence for Information Technology, 8(3), 107-114. https://doi.org/10.22156/CS4SMB.2018.8.3.107
- J. H. Ku. (2017). A Study on the Platform for Big Data Analysis of Manufacturing Process. Journal of Convergence for Information Technology, 7(5), 177-182. https://doi.org/10.22156/CS4SMB.2017.7.5.177