DOI QR코드

DOI QR Code

SMA-based devices: insight across recent proposals toward civil engineering applications

  • 투고 : 2019.02.28
  • 심사 : 2019.03.10
  • 발행 : 2019.07.25

초록

Metallic shape memory alloys present fascinating physical properties such as their super-elastic behavior in austenite phase, which can be exploited for providing a structure with both a self-centering capability and an increased ductility. More or less accurate numerical models have been introduced to model their behavior along the last 25 years. This is the reason for which the literature is rich of suggestions/proposals on how to implement this material in devices for passive and semi-active control. Nevertheless, the thermo-mechanical coupling characterizing the first-order martensite phase transformation process results in several macroscopic features affecting the alloy performance. In particular, the effects of day-night and winter-summer temperature excursions require special attention. This aspect might imply that the deployment of some devices should be restricted to indoor solutions. A further aspect is the dependence of the behavior from the geometry one adopts. Two fundamental lacks of symmetry should also be carefully considered when implementing a SMA-based application: the behavior in tension is different from that in compression, and the heating is easy and fast whereas the cooling is not. This manuscript focuses on the passive devices recently proposed in the literature for civil engineering applications. Based on the challenges above identified, their actual feasibility is investigated in detail and their long term performance is discussed with reference to their fatigue life. A few available semi-active solutions are also considered.

키워드

참고문헌

  1. Amarante dos Santos, F.P., Cismasiu, C. and Teixeira P. (2013), "Semi-active vibration control device based on superelastic NiTi wires", Struct. Control Health Monit., 20(6), 890-902. https://doi.org/10.1002/stc.1500.
  2. Araki, Y., Maekawa, N., Shrestha1, K.C., Yamakawa, M. Koetaka, Y., Omori, T. and Kainuma, R. (2014), "Feasibility of tension braces using Cu-Al-Mn superelastic alloy bars", Struct. Control Health Monit., 21(10), 1304-1315. https://doi.org/10.1002/stc.1644.
  3. Auricchio, F., Faravelli, L., Magonette, G. and Torra, V. (eds.) (2001), Shape memory alloys: advances in modelling and applications, CIMNE, Barcelona.
  4. Carreras, G., Casciati, F., Casciati, S., Isalgue, A., Marzi, A. and Torra, V. (2011), "Fatigue laboratory tests toward the design of SMA portico braces", Smart Struct. Syst., 7(1), 41-57. http://dx.doi.org/10.12989/sss.2011.7.1.041.
  5. Casciati S. and Osman A.M. (2005), "Damage assessment and retrofit study for the Luxor Memnon Colossi", Struct. Control Health Monit., 12(2), 139-156. https://doi.org/10.1002/stc.53.
  6. Casciati, F. and Domaneschi, M. (2007), "Semi-active Electro-inductive devices: Characterization and modelling", J. Vib. Control, 13(6), 815-838. https://doi.org/10.1177/1077546307077465.
  7. Casciati, F. and Faravelli, L. (2009), "A passive control device with SMA components: from the prototype to the model", Struct. Control Health Monit., 16(7-8), 751-765. https://doi.org/10.1002/stc.328.
  8. Casciati, F. and van der Eijk, C. (2008), "Variability in mechanical properties and micro-structure characterization of CuAlBe shape memory alloys for vibration mitigation", Smart Struct. Syst., 4(2), 103-121. http://dx.doi.org/10.12989/sss.2008.4.2.103.
  9. Casciati, F., Casciati, S. and Faravelli, L. (2011), "Fatigue damage accumulation in a Cu-based shape memory alloy: preliminary investigation", CMC-Comput. Mater. Continua, 23(3), 287-306.
  10. Casciati, F., Faravelli, L. and Fuggini, C. (2008), "Cable vibration mitigation by added SMA wires", Acta Mechanica, 195(1-4), 141-155. https://doi.org/10.1007/s00707-007-0541-x
  11. Casciati, F., Faravelli, L. and Petrini, L. (1998), "Energy dissipation in shape memory alloy devices", Comput.-Aided Civil Infrastruct. Eng., 13(6), 433-442. https://doi.org/10.1111/0885-9507.00121.
  12. Casciati, S. and Faravelli, L. (2008), "Structural components in shape memory alloy for localized energy dissipation", Comput. Struct., 86(3-5), 330-339. https://doi.org/10.1016/j.compstruc.2007.01.037.
  13. Casciati, S. and Hamdaoui, K. (2008), "Experimental and numerical studies toward the implementation of shape memory alloy ties in masonry structures", Smart Struct. Syst., 4(2), 153-169. http://dx.doi.org/10.12989/sss.2008.4.2.153.
  14. Casciati, S., Faravelli, L. and Vece, M. (2017). "Investigation on the fatigue performance of Ni-Ti thin wires", Struct. Control Health Monit., 24(1), e1855. https://doi.org/10.1002/stc.1855.
  15. Casciati, S., Faravelli, L. and Vece, M. (2018a), "Long-time storage effects on shape memory alloy wires", Acta Mechanica, 229(2), 697-705. https://doi.org/10.1007/s00707-017-1993-2
  16. Casciati, S., Torra, V. and Vece, M. (2018b), "Local effects induced by dynamic load self-heating in NiTi wires of shape memory alloys", Struct. Control Health Monit., 25(4), e2134. https://doi.org/10.1002/stc.2134.
  17. Chang, W.S. and Araki, Y. (2016), "Use of shape-memory alloys in construction: a critical review", Civil Eng., 169(CE2), 87-95. https://doi.org/10.1680/jcien.15.00010.
  18. Chopra, A.K. (1995), Dynamics of Structures, Theory and Applications to Earthquake Engineering, Prentice-Hall, Englewood Cliffs, NJ.
  19. Chrysostomou, C.Z., Stassis, A., Demetriourder, T. and Hamdaoui, K. (2008), "Application of shape memory alloy prestressing devices on an ancient aqueduct", Smart Struct. Syst., 4(2), 261-268. http://dx.doi.org/10.12989/sss.2008.4.2.261.
  20. Fang, C., Wang, W., He, C. and Chen, Y. (2017), "Self-centring behaviour of steel and steel-concrete composite connections equipped with NiTi SMA bolts", Eng. Struct., 150, 390-408. https://doi.org/10.1016/j.engstruct.2017.07.067.
  21. Fang, C., Yam, M.C.H, Chan, T.M., Wang, W., Yang, X. and Lin, X. (2018), "A study of hybrid self-centring connections equipped with shape memory alloy washers and bolts", Eng. Struct., 164, 155-168. https://doi.org/10.1016/j.engstruct.2018.03.006.
  22. Genta, G. (2008), Vibration Dynamics and Control, Springer, New York.
  23. Gur, S., Frantziskonis, G.N. and Mishra, S.K. (2017), "Thermally modulated shape memory alloy friction pendulum (tmSMA- FP) for substantial near- fault earthquake structure protection", Struct. Control Health Monit., 24(11), e2021. https://doi.org/10.1002/stc.2021.
  24. Hou, H., Li, H., Qiu, C. and Zhang, Y. (2017), "Effect of hysteretic properties of SMAs on seismic behavior of self-centering concentrically braced frames", Struct. Control Health Monit., 25(3), e2110. https://doi.org/10.1002/stc.2110.
  25. Indirli, M., Castellano, M.G., Clemente, P. and Martelli, A. (2001), "Demo-application of shape memory alloy devices: the Rehabilitation of the S. Giorgio Church Bell Tower", Proceedings of the Conference: SPIE Smart Systems for Bridges, Structures, and Highways, Newport Beach, California, USA
  26. Indirli, M. and Castellano, M.G. (2008), "Shape-memory alloy devices for the structural improvement of masonry heritage structures", Int. J. Architect. Heritage, 2(2), 93-119. https://doi.org/10.1080/15583050701636258.
  27. Lecce, L. and Concilio, A. (2014), Shape Memory Alloy Engineering: For Aerospace, Structural and Biomedical Applications. Elsevier, Amsterdam.
  28. Lexcellent, C. (2013), Shape-Memory Alloys Handbook, Wiley-ISTE, New York.
  29. McCormick, J., Tyber, J., DesRoches, R., Gall, K. and Maier, H.J. (2007), "Structural engineering with NiTi. II: mechanical behavior and scaling", J. Eng. Mech., 133(9), 1019-1029. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:9(1019).
  30. Ozbulut, O.E., Hurlebaus, S. and DesRoches, S. (2011), "Seismic response control using shape memory alloys: a review", J. Intel. Mat. Syst. Str., 22(14), 1531-1549. https://doi.org/10.1177/1045389X11411220.
  31. Parulekar, Y.M., Reddy, G.R., Vaze, K.K., Guha, S., Gupta, C., Muthumani, K. and Sreekala, R. (2012), "Seismic response attenuation of structures using shape memory alloy dampers", Struct. Control Health Monit., 19(1), 102-119. https://doi.org/10.1002/stc.428.
  32. Qiu, C. and Zhu, S. (2014), "Characterization of cyclic properties of superelastic monocrystalline Cu-Al-Be SMA wires for seismic applications", Constr. Build. Mater., 72, 219-230. https://doi.org/10.1016/j.conbuildmat.2014.08.065.
  33. Qiu C. and Zhu, S. (2017b), "Performance-based seismic design of self-centering steel frames with SMA-based braces", Eng. Struct., 130, 67-82. https://doi.org/10.1016/j.engstruct.2016.09.051.
  34. Qiu, C. and Zhu, S. (2017a), "Shake table test and numerical study of self-centering steel frame with SMA braces", Earthq. Eng. Struct. D., 46, 117-137. https://doi.org/10.1002/eqe.2777.
  35. Saadat, S., Salichs, J., Noori, M., et al. (2002), "An overview of vibration and seismic applications of NiTi shape memory alloy", Smart Mater, Struct., 11, 218-229. https://doi.org/10.1088/0964-1726/11/2/305
  36. Saiidi, M.S., Tazarv, M., Varela, S., Bennion, S., Marsh M.L., Ghorbani, I. and Murphy, T.P. (2017), Seismic Evaluation of Bridge Columns with Energy Dissipating Mechanisms, Volume 1: Research Overview and Volume 2: Guidelines, The National Academies Press, DOI 10.17226/24985.
  37. Shook, D.A., Roschke, P.N. and Ozbulut, O.E. (2008), "Superelastic semi-active damping of a base-isolated structure", Struct. Control Health Monit., 15(5), 746-768. https://doi.org/10.1002/stc.276.
  38. Song, G., Maa, N. and Li, H.N. (2006), "Applications of shape memory alloys in civil structures", Eng. Struct., 28(9), 1266-1274. https://doi.org/10.1016/j.engstruct.2005.12.010.
  39. Torra, V., Auguet, C., Isalgue, A., Carreras, G., Terriault, P. and Lovey, F.C. (2013), "Built in dampers for stayed cables in bridges via SMA. The SMARTeR-ESF project: A mesoscopic and macroscopic experimental analysis with numerical simulations", Eng. Struct., 49, 43-57. https://doi.org/10.1016/j.engstruct.2012.11.011.
  40. Torra, V., Carreras, G., Casciati, S. and Terriault, P. (2014), "On the NiTi wires in dampers for stayed cables", Smart Struct. Syst., 13(3), 353-374. http://dx.doi.org/10.12989/sss.2014.13.3.353.
  41. Torra, V., Isalgue, A., Lovey, F.C. and Sade, M. (2015), "Shape memory alloys as an effective tool to damp oscillations - Study of the fundamental parameters required to guarantee technological applications", J. Therm. Anal. Calorimetry, 119(3), 1475-1533. https://doi.org/10.1007/s10973-015-4405-7
  42. Wang, B. and Zhu, S. (2018b), "Superelastic SMA U-shaped dampers with self-centering functions", Smart Mater. Struct., 27(5), 055003. https://doi.org/10.1088/1361-665X/aab52d
  43. Wang, W., Fang, C. and Liu, J. (2016), "Large size superelastic SMA bars: heat treatment strategy, mechanical property and seismic application", Smart Mater. Struct., 25(7), 075001 (17pp) https://doi.org/10.1088/0964-1726/25/7/075001
  44. Wang, W., Fang, C., Yang, X., Chen, Y., Ricles, J. and Sause, R. (2017), "Innovative use of a shape memory alloy ring spring system for self-centering connections", Eng. Struct., 153, 503-515. https://doi.org/10.1016/j.engstruct.2017.10.039.
  45. Wang, B. and Zhu, S. (2018a), "Seismic behavior of self-centering reinforced concrete wall enabled by superelastic shape memory alloy bars", Bull. Earthq. Eng., 16(1), 479-502. https://doi.org/10.1007/s10518-017-0213-8
  46. Witting, P.R. and Cozzarelli, F.A. (1992), Shape memory structural dampers: material properties, design and seismic testing, Technical Report NCEER-92e0013.S.
  47. Zhang, Y., Camilleri, J.A. and Zhu, S. (2008), "Mechanical properties of copper-based superelastic alloy at cold temperatures for the seismic protection of bridges", Smart Mater. Struct., 17(2), 025008. https://doi.org/10.1088/0964-1726/17/2/025008
  48. Zhou, H., Qi, S., Yao, G., Zhou, L., Sun, L. and Xing, F. (2018a), "Damping and frequency of a model cable attached with a pre-tensioned shape memory alloy wire: Experiment and analysis", Struct. Control Health Monit., 25(2), e2106. https://doi.org/10.1002/stc.2106.
  49. Zhou, P., Liu, M., Li, H. and Song, G. (2018b), "Experimental investigations on seismic control of cable-stayed bridges using shape memory alloy self-centering dampers", 25(7), Struct. Control Health Monit., e2110. https://doi.org/10.1002/stc.2180.
  50. Zhu, S. (2018), Personal communication.
  51. Zhu, S. and Zhang, Y. (2013), "Loading rate effect on superelastic SMA-based seismic response modification devices", Earthq. Struct., 4(6), 607-627. http://dx.doi.org/10.12989/eas.2013.4.6.607.