• 한국세라믹학회지
• /
• 제54권2호
• /
• pp.128-136
• /
• 2017

Fly ash from a circulating fluidized bed combustion boiler (CFBC fly ash) is very different in mineralogical composition, chemical composition, and morphology from coal ash from traditional pulverized fuel firing because of many differences in their combustion processes. The main minerals of CFBC fly ash are lime and anhydrous gypsum; however, due to the fuel type, the strength development of CFBC fly ash is affected by minor components of active $SiO_2$ and $Al_2O_3$. The initial hydration product of the circulating fluidized bed combustion fly ash (B CFBC ash) using petro coke as a fuel is Portlandite which becomes gypsum after 7 days. Due to the structural features of the portlandite and gypsum, the self-cementitious strength of B CFBC ash was low. While the hydration products of the circulating fluidized bed combustion fly ash (A CFBC ash) using bituminous coal as a fuel were initially portlandite and ettringite, after 7 days the hydration products were gypsum and C-S-H. Due to the structural features of ettringite and C-S-H, A CFBC ash showed a certain degree of self-cementitious strength.

• 한국건축시공학회지
• /
• 제21권2호
• /
• pp.141-148
• /
• 2021

본 연구에서는 산업부산물 중 순환유동층 연소방식과 미분탄 연소과정에서 발생되는 플라이애시와 고로슬래그 미분말을 치환한 시멘트 모르타르의 특성을 파악하였다. 연구 결과, 순환유동층 플라이애시 및 미분탄 플라이애시 혼합 사용 시 강도발현 뿐만 아니라 내구성 측면에서도 유리하게 나타난다. 순환유동층 플라이애시는 초기 반응성 향상에 기여하며, 미분탄 플라이애시는 포졸란 반응으로 장기 강도 발현에 관여하게 된다. 따라서 순환유동층 플라이애시와 미분탄 플라이애시의 혼합사용은 고로슬래그 미분말을 치환한 시멘트 모르타르의 상호 보완적인 요소로 작용함을 알 수 있다.

• 한국세라믹학회지
• /
• 제54권5호
• /
• pp.380-387
• /
• 2017

In this study, unstable CaO was converted into a stable Ca compound by using carbonation in a circulating fluidized bed boiler of fly ash to confirm material usability as cement admixture; also undertaken was carbonation test and mortar to examine chemical and physical change by measuring absorption rate and compressive strength. To investigate the chemical properties of circulating fluidized bed boiler fly ash, XRD and TG-DTA were used to determine how the properties of the reaction product change quantitatively during carbonation. In order to stabilize CaO, carbonation of CaO is considered to be the most desirable process. This is because $CaCO_3$, which is a Ca compound, was produced by carbonate reaction of unstable CaO, and decrease of the absorption rate and improvement of the compressive strength were observed when the carbonated fly ash was replaced with cement.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.153-159
• /
• 2019

In this study, fly ash of a fluidized bed boiler produced in a power plant was stabilized by hydration and carbonation reaction. Then, each raw material was pulverized by two kinds of grinding equipment (Planetary mills and pot mills); the degree of grinding and the agglomeration behavior were observed. It was found that there were changes of specific surface area and particle size distribution according to grinding time. The surface of the raw material was observed using an optical microscope. As a result, agglomerates of about 75 ㎛ or more due to electrostatic phenomenon were formed as the grinding time became longer; it was confirmed that the crushing efficiency slightly increased with use of antistatic agent.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권5호
• /
• pp.119-126
• /
• 2018

최근 화력발전소에서는 순환유동층 연소방식의 발전소가 증가하는 추세이다. 순환유동층 보일러애시는 탈황 효과를 위해 석회석을 첨가함에 따라 애시 중에 포함되는 CaO, $SO_3$성분이 증가하여 일반적인 플라이애시 보다 free-CaO 함량이 높다. 또한 순환유동층 보일러애시는 기존의 플라이애시와 다르게 자기수경성 특성과, 높은 free-CaO함량에 의해 물과 만나면 높은 반응성을 갖는다. 본 연구는 순환유동층 보일러애시의 자기수경성 특성을 이용하여, 시멘트를 대체할 수 있는 비소성 결합재로써 활용 가능성에 대해 분석하였다. 순환유동층 보일러 애시의 함량에 따른 역학적 및 수화특성에 대해 검토하였다. 또한 석고의 종류 및 함유량에 따른 순환유동층 보일러애시 활용 비소성 결합재에 대한 압축강도 및 미세구조에 미치는 영향을 분석하였다.

• Computers and Concrete
• /
• 제9권5호
• /
• pp.375-387
• /
• 2012

The objective of this investigation was to develop rules for automatic categorization of concrete quality using selected artificial intelligence methods based on machine learning. The range of tested materials included concrete containing a new waste material - solid residue from coal combustion in fluidized bed boilers (CFBC fly ash) used as additive. The rapid chloride permeability test - Nordtest Method BUILD 492 method was used for determining chloride ions penetration in concrete. Performed experimental tests on obtained chloride migration provided data for learning and testing of rules discovered by machine learning techniques. It has been found that machine learning is a tool which can be applied to determine concrete durability. The rules generated by computer programs AQ21 and WEKA using J48 algorithm provided means for adequate categorization of plain concrete and concrete modified with CFBC fly ash as materials of good and acceptable resistance to chloride penetration.

• 자원리싸이클링
• /
• 제20권1호
• /
• pp.54-60
• /
• 2011

유동층 연소 방식의 화력발전소에서 발생된 석탄 비산재를 점토와 혼합하여 8 mm 크기의 구형 성형체를 제조한 후, $1050^{\circ}C{\sim}1250^{\circ}C$에서 10분 직화 소성하여 인공골재를 제조하고, 골재의 발포특성에 미치는 비산재의 영향을 분석하였다. 비산재가 50 wt% 미만으로 첨가원 시편은 발포되면서 black-coring 현상을 나타내었다. 비산재가 50 wt% 이상 포함되면, 소성온도와 함께 골재의 부피비중이 높아지면서 시편 전체가 검은색으로 변하였다. 이는 미연탄소 함량의 증가로 인해 과도한 환원분위기가 형성되고 따라서 가스가 급속히 방출됨과 동시에 대부분의 산화철이 환원되기 때문이다. 소성온도가 같을 경우 비산재 함유량이 높을수록 골재의 부피비중은 낮아지는 경향을 보였다. 비산재 첨가량이 10 wt%인 경우를 제외한 모든 시편들은 소성 온도를 높이면 홉수율이 감소하였는데 이는 고온일수록 액상이 많이 형성되었기 때문이다. 본 연구에서 제조된 유통층 연소기 석탄 비산재에 점토가 10~90 wt% 첨가된 시편들은 부피비중이 0,9~1.8, 흡수율이 8~60%로 다양한 특성을 나타내어 중량 내지 경량골재로 사용이 가능할 것으로 생각된다.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.154-158
• /
• 2015

This paper investigates the reaction rates of $CO_2$ that stores carbonation through comparing the carbonation behavior between $Ca(OH)_2$ and fly ash with circulating fluidized bed combustion (CFBC) containing a large amount of free CaO. Because fly ash with CFBC contains abundant free CaO, it cannot be used as a raw material for concrete admixtures; hence, its usage is limited. Thus, it has been buried until now. In order to consider its reuse, we conduct carbonation reactions and investigate its rates. X-ray diffraction (XRD), thermogravimetric/differential thermal analysis (TG/DTA), and X-ray fluorescence (XRF) are conducted for the physical and chemical analyses of the raw materials. Furthermore, we use a PH meter and thermometer to verify the carbonization rates. We set the content of the fly ash of CFBC, $Ca(OH)_2$, $CO_2$ flow rate, and water to 100 ~ 400 g, 30 ~ 120 g, 700 cc/min, and 300 ~ 1200 g, respectively, based on the content of the free CaO determined through the TG/DTA analyses. As a result, the carbonization rate of the fly ash with CFBC is the same as that of $Ca(OH)_2$, and it tends to increase linearly. Based on these results, we investigate the carbonization behavior as a function of the free CaO content contained in the raw material.

• 한국세라믹학회지
• /
• 제55권2호
• /
• pp.160-165
• /
• 2018

This paper investigates the reaction rate of $CO_2$ storing carbonation hybrid reaction by comparing the behavior of carbonation between $Ca(OH)_2$ and fly ash with that of CFBC (Circulating Fluidized Bed Combustion) containing plenty of Free-CaO. Because fly ash with CFBC contains a lot of unreacted CaO, it cannot be used as a raw material for concrete admixtures and its usages are limited. To reuse such material, we stabilized unreacted CaO by carbonation and investigated the carbonation rate. We used a pH meter and a thermometer to check the rate of the carbonization. Also, we set the contents of fly ash with CFBC, $Ca(OH)_2$, flow and fluid of $CO_2$, respectively, to 100 g, 50 g, 100 ~ 1000 cc/min and 400 g based on the content of Free-CaO. We used carbonated water instead of water, and added an alkaline activator to promote the carbonation rate. As a result, the addition of the alkaline activator and carbonated water promoted the rate of carbonation via a hybrid reaction.

• 한국환경과학회지
• /
• 제15권6호
• /
• pp.587-592
• /
• 2006

The advantage of CFBC(Circulating fluidized bed combustor) is that it can apply to various fuel sources including the lower rank fuel and remove SOx by means of direct supply of limestone to the combustor without additional desulfation facility. In this paper, we denote characteristics of fly and bed ash to reuse finer limestone usually abandoned(used spec[Coarse LS] 0.1mm under 25%, new spec[Fine LS] 0.1mm under 50%). According to the results, the chemical composition of fly ash was as follows; $SiO_2\;40.8%,\;Al_2O_3\;31.9%,\;CaO\;10.7%,\;K_2O\;4.46%$ in the case of coarse limestone and $SiO_2\;41.1%,\;Al_2O_3\;31.3%,\;CaO\;10.9%,\;K_2O\;4.66%$ in the case of fine limestone. The chemical composition of bed ash was as follows; $SiO_2\;54.2%,\;Al_2O_3\;33.1%,\;CaO\;1.56%,\;K_2O\;4.34%$ in the case of coarse limestone and $SiO_2\;53.8%,\;Al_2O_3\;32.6%,\;CaO\;2.21%,\;K_2O\;4.45%$ in the case of fine limestone. It showed that there was no significant change in chemical composition. And it is conformed that there was no significant change in particle size and shapes.