DOI QR코드

DOI QR Code

Influence of a Novel Mold Inhibitor on Mechanical Properties and Water Repellency of Bamboo Fiber-based Composites

  • Qi, Yue (Key Lab Wood Science & Technology, State Forestry Administration, Research Institute of Wood Industry, Chinese Academy of Forestry) ;
  • Huang, Yu-Xiang (Key Lab Wood Science & Technology, State Forestry Administration, Research Institute of Wood Industry, Chinese Academy of Forestry) ;
  • Ma, Hong-Xia (Guangdong Academy of Forestry) ;
  • Yu, Wen-Ji (Key Lab Wood Science & Technology, State Forestry Administration, Research Institute of Wood Industry, Chinese Academy of Forestry) ;
  • Kim, Nam-Hun (Department of Forest Biomaterials Engineering, College of Forest and Environmental Sciences, Kangwon National University) ;
  • Zhang, Ya-Hui (Key Lab Wood Science & Technology, State Forestry Administration, Research Institute of Wood Industry, Chinese Academy of Forestry)
  • 투고 : 2019.01.25
  • 심사 : 2019.05.13
  • 발행 : 2019.05.25

초록

Effects of a novel mold inhibitor specifically for bamboo, on the properties of composite products have been confirmed in this study. The mechanical and dimensional stability properties of bamboo fiber-based composites (BFBCs) from different bamboo species were also investigated. The results showed that Burmanica Gamble possessed the highest values of modulus of elasticity (MOE) of 33.2 GPa, modulus of rupture (MOR) of 286.9 MPa, compressive strength of 182.6 MPa and shear strength of 24.0 MPa. By contrast, Phyllostochys heterocycla among all of species showed the lowest MOE of 16.3 GPa, MOR of 170.3 MPa and compressive strength of 128.9 MPa were the lowest among all of species. Moreover, there is a remarkable variation in the swelling and water absorption between the samples with 4 h and 28 h water immersion treatment, especially Phyllostachys iridenscens. Overall, the results suggested that TCIT (Tebuconazole and 3(2H)-isothiazolone) had no significant effect on the mechanical properties compared with the control condition, and it would be utilized as an antimould of BFBCs manufacturing.

키워드

HMJGBP_2019_v47n3_336_f0001.png 이미지

Fig. 1. Oriented bamboo fiber mats.

HMJGBP_2019_v47n3_336_f0002.png 이미지

Fig. 2. Manufacturing process of TCIT-BFBC.

HMJGBP_2019_v47n3_336_f0003.png 이미지

Fig. 3. Thickness swelling ratio (TSR) of different TCIT-BFBCs.

HMJGBP_2019_v47n3_336_f0004.png 이미지

Fig. 4. Width swelling ratio (WSR) of different TCIT-BFBCs

HMJGBP_2019_v47n3_336_f0005.png 이미지

Fig. 5. Water absorption ratio (WAR) of different TCIT-BFBCs.

Table 1. The basic information of different bamboo species

HMJGBP_2019_v47n3_336_t0001.png 이미지

Table 2. Effect of TCIT treatment on mechanical properties of different bamboo species

HMJGBP_2019_v47n3_336_t0002.png 이미지

참고문헌

  1. ASTM D3501 2005 Standard test method for woodbased structural panels in compression. ASTM International, West Conshohocken, PA.
  2. GB/T 17657 2013 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels. Standardization Administration of China, Beijing, China.
  3. GB/T 20241 2006 Laminated veneer lumber. Standardization Administration of China, Beijing, China.
  4. GB/T 30364 2013 Bamboo scrimber flooring. Standardization Administration of China, Beijing, China.
  5. Gu, D.Y. 2009. Study on effect factors of adhesive shear strength. Chemical Technology Market 32:31-32.
  6. He, S., Xu, J., Wu, Z.X., Chen, Y.H., Song, J.G. 2017. Effect of bamboo knitting on enhancing properties of bamboo scrimber. European Journal of Wood and Wood Products (online published).
  7. Kang, C.W., Chung, W.Y., Han, J.O., Kang, H.Y. 2017. High-Temperature Drying of Bamboo Tubes Pretreated with Polyethylen Glycol Solution. Journal of the Korean Wood Science and Technology 45(2):139-146. https://doi.org/10.5658/WOOD.2017.45.2.139
  8. Lee, J.Y., Kim, C.H., Nam, H.G., Park, H.H., Kwon, S., Park, D.H. 2016. Characteristics of Thermomechanical Pulps Made of Russian Spruce and Larix, and Myanmar Bamboo. Journal of the Korean Wood Science and Technology 44(1): 135-146. https://doi.org/10.5658/WOOD.2016.44.1.135
  9. Maulana, S., Busyra, I., Fatrawana, A., Hidayat, W., Sari, R.K., Sumardi, I., Wistara, I.N.J., Lee, S.H., Kim, N.H., Febrianto, F. 2017. Effects of Steam Treatment on Physical and Mechanical Properties of Bamboo Oriented Strand Board. Journal of the Korean Wood Science and Technology 45(6):872-882. https://doi.org/10.5658/WOOD.2017.45.6.872
  10. Ma, X.X., Jiang, M.L., Wu, Y.Z., Wang, P. 2013. Effect of Wood Surface Treatment on Fungal Decay and Termite Resistance. BioResources 8: 2366-2375.
  11. Meng, F.D., Yu, Y.L., Zhang, Y.M., Yu, W.J.,Gao, J.M. 2016. Surface chemical composition analysis of heat-treated bamboo. Applied Surface Science 371:383-390. https://doi.org/10.1016/j.apsusc.2016.03.015
  12. Park, S.H., Jang, J.H., Wistara, N.J., Hidayat, W., Lee, M., Febrianto, F. 2018. Anatomical and Physical Properties of Indonesian Bamboos Carbonized at Different Temperatures. Journal of the Korean Wood Science and Technology 46(6): 656-669. https://doi.org/10.5658/WOOD.2018.46.6.656
  13. Park, J.W., Kim, H., Lee, J.H., Jang, S.W., Kim, H.J. 2018. Evaluation of Mechanical Performance and Flame Retardant Characteristics of Biomass-based EVA Composites using Intumescent Flame Retardant Technology. Journal of the Korean Wood Science and Technology 46(2): 189-201. https://doi.org/10.5658/WOOD.2018.46.2.189
  14. Roh, J.K., Kim, J.K., Kim, S.I., Ra, J.B., Kim, Y.J., Park, S.J. 2004. Manufacture of wood veneerbamboo zephyr composite board-I. Properties of bamboo zephyr and composite board made from Moso, Giant Timber and Hachiku bamboo. Journal of the Korean Wood Science and Technology 32(3):42-51.
  15. Shin, Y.J., Yun, H.J., Lee, E.J., Chung, W.Y. 2018. A Study on the Development of Bamboo/PLA Bio-composites for 3D Printer Filament. Journal of the Korean Wood Science and Technology 46(1):107-113. https://doi.org/10.5658/WOOD.2018.46.1.107
  16. Umezawa, T. 2001.Chemistry of extractives. In: Wood and Cellulosic Chemistry. Eds. Hon, D.N.S. Shiraishi, N. Marcell Dekker, Inc., New York, pp.213-241.
  17. Wang, J., Yuan, S.F., Fan, H., Li, Q., Wang, H.Y. 2016. Effect of different antimildew and antiseptic agents on reconstructed bamboo timber. Journal of Zhejiang Forest Science and Technology 36: 8-12.
  18. Wei, W.S., Qin, D.C.2011. Effects four mold inhibitor on properties of reconsolidated bamboo. Journal of Northeast Forestry University 39: 93-95.
  19. Wu, B.L., Yu, Y.L., Qi, J.Q., Yu, W.J. 2014. Effects of bamboo bundles treated with fine fluffing and carbonized treatment on the properties of bamboo scrimber. Journal of Nanjing Forest University (Natural Sciences Edition) 38: 115-120.
  20. Youe, W.J., Lee, S.M., Lee, S.S., Kim, Y.S. 2016. Physical and Mechanical Properties of The Ligninbased Carbon Nanofiber-reinforced Epoxy Composite. Journal of the Korean Wood Science and Technology 44(3): 406-414. https://doi.org/10.5658/WOOD.2016.44.3.406
  21. Yu, W.J., Yu, Y.L. 2013. Development and prospect of wood and bamboo scrimber industry in China. China Wood Industry 27: 5-8.
  22. Yu, Y.L., Zhu, R.X., Wu, B.L., Hu, Y.A., Yu, W.J. 2015. Fabrication, material properties, and application of bamboo scrimber. Wood Science and Technology 49: 83-98. https://doi.org/10.1007/s00226-014-0683-7
  23. Zabel, R.A., Morrell, J.J. 1992. Wood Microbiology, Decay and its Prevention, Academic Press, New York, USA.
  24. Zhang, Y.H., Zhu, R.X., Yu, W.J., Ren, D.H. 2012. Performance of exterior crushed bamboo-mat composite after accelerated aging test. China Wood Industry 26: 6-8.
  25. Zhang, Y.M., Yu, W.J. 2013a. Effect of heat treatment on properties of crushed bamboo-mat composite. China Wood Industry 27: 5-8.
  26. Zhang, Y.M., Yu, W.J. 2013b. Effect of heat treatment on properties of crushed bamboo-based fiber composite. China Wood Industry 49: 160-168.
  27. Zhang, Y.H., Huang, Y.X., Ma, H.X., Yu, W.J., Yu, W.J., Qi, Y. 2018. Effect of different pressing processes and density on dimensional stability and mechanical properties of bamboo fiber-based composites. Journal of theKorean Wood Science and Technology 46(4): 355-361.
  28. Zhang, Y., Ma, Y. 2016. Study on The Preparation and Mechanical Properties of Fiberglass Reinforced Wood-Based Composite. Journal of the Korean Wood Science and Technology 44(4): 505-514. https://doi.org/10.5658/WOOD.2016.44.4.505
  29. Zhu, R.X., Yu, W.J. 2011. Effect of density on physical and mechanical properties of reconstituted smallsized bamboo fibrous sheet composite. Advanced Materials Research 150: 634-639. https://doi.org/10.4028/www.scientific.net/AMR.150-151.634
  30. Zhu, R.X., Zhang, Y.M., Yu, W.J. 2015. Changes in the chemical properties of Phyllostachys iridescens bamboo with steam treatment. BioResources 10:5987-5993.