DOI QR코드

DOI QR Code

Combined seismic and energy upgrading of existing reinforced concrete buildings using TRM jacketing and thermal insulation

  • Gkournelos, Panagiotis D. (Department of Civil Engineering, University of Patras) ;
  • Bournas, Dionysios A. (European Commission, Joint Research Centre (JRC)) ;
  • Triantafillou, Thanasis C. (Department of Civil Engineering, University of Patras)
  • 투고 : 2018.09.24
  • 심사 : 2018.12.17
  • 발행 : 2019.05.25

초록

The concept of the combined seismic and energy retrofitting of existing reinforced concrete (RC) buildings was examined in this paper through a number of case studies conducted on model buildings (simulating buildings of the '60s-'80s in southern Europe) constructed according to outdated design standards. Specifically, seismic and thermal analyses have been conducted prior to and after the application of selected retrofitting schemes, in order to quantify the positive effect that retrofitting could provide to RC buildings both in terms of their structural and energy performance. Advanced materials, namely the textile reinforced mortars (TRM), were used for providing seismic retrofitting by means of jacketing of masonry infills in RC frames. Moreover, following the application of the TRM jackets, thermal insulation materials were simultaneously provided to the RC building envelope, exploiting the fresh mortar used to bind the TRM jackets. In addition to the externally applied insulation material, all the fenestration elements (windows and doors) were replaced with new high energy efficiency ones. Afterwards, an economic measure, namely the expected annual loss (EAL) was used to evaluate the efficiency of each retrofitting method, but also to assess whether the combined seismic and energy retrofitting is economically feasible. From the results of this preliminary study, it was concluded that the selected seismic retrofitting technique can indeed enhance significantly the structural behaviour of an existing RC building and lower its EAL related to earthquake risks. Finally, it was found that the combined seismic and energy upgrading is economically more efficient than a sole energy or seismic retrofitting scenario for seismic areas of south Europe.

키워드

참고문헌

  1. Al-Chaar, G., Lamb, G.E. and Issa, M.A. (2003), "Effect of openings on structural performance of unreinforced masonry infilled frames", ACI, 211, 247-261.
  2. Antonopoulos, C.P. and Triantafillou, T.C. (2003), "Experimental investigation of FRP-strengthened RC beam-column joints", J. Compos. Constr., ASCE, 7(1), 39-49. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:1(39)
  3. Asteris, P.G., Giannopoulos, I.P. and Chrysostomou, C.Z. (2012), "Modeling of infilled frames with openings", Open Constr. Build. Tech. J., 6, 81-91. https://doi.org/10.2174/1874836801206010081
  4. Atanasiou, B., Despret, C., Economidou, M., Maio, J., Nolte, I. and Rapf, O. (2011), "Europe's buildings under the microscope: A country-by-country review of the energy performance of buildings", Research Report No. 9789491143014, Buildings Performance Institute Europe (BPIE).
  5. Belleri, A. and Marini, A. (2016), "Does seismic risk affect the environmental impact of existing buildings?", Energy Build., 110, 149-158. https://doi.org/10.1016/j.enbuild.2015.10.048
  6. Bournas, D.A. (2018a), "Concurrent seismic and energy retrofitting of RC and masonry building envelopes using inorganic textile-based composites with insulation materials: A new concept", Compos. Part B: Eng., 148, 166-179. https://doi.org/10.1016/j.compositesb.2018.04.002
  7. Bournas, D.A. (2018b), "Innovative materials for seismic and energy retrofitting of the existing EU buildings", Research Report, No. EUR 29184 EN, Joint Research Centre, Ispra, Italy.
  8. Bournas, D.A., Triantafillou, T.C., Zygouris, K. and Stavropoulos, F. (2009), "Textile-Reinforced Mortar (TRM) versus FRP jacketing in seismic retrofitting of RC columns with continuous or lap-spliced deformed vars", J. Compos. Constr., ASCE, 13(5), 360-371. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000028
  9. Calvi, G.M. (2013), "Choices and criteria for seismic strengthening", J. Earthq. Eng., 17(6), 769-802. https://doi.org/10.1080/13632469.2013.781556
  10. Calvi, G.M., Sousa, L. and Ruggeri, C. (2016), "Energy efficiency and seismic resilience: A common approach", Multi-hazard Approaches to Civil Infrastructure Engineering, Springer International Publishing.
  11. Chalioris, C.E., Papadopoulos, C.P., Pourzitidis, C.N., Fotis, D. and Sideris, K.K. (2013), "Application of a reinforced selfcompacting concrete jacket in damaged reinforced concrete beams under monotonic and repeated loading", J. Eng., Article ID 912983, 12.
  12. Chalioris, C.E., Thermou, G.E. and Pantazopoulou, S.J. (2014), "Behaviour of rehabilitated RC beams with self-compacting concrete jacketing-Analytical model and test results", Constr. Build. Mater., 55, 257-273. https://doi.org/10.1016/j.conbuildmat.2014.01.031
  13. Chen, X. and Liu, Y. (2015), "Numerical study of in-plane behavior and strength of concrete masonry infills with openings", Eng. Struct., 82, 226-235. https://doi.org/10.1016/j.engstruct.2014.10.042
  14. Daskalaki, E.G., Droutsa, K., Balaras, K.A. and Kontogiannidis, S. (2016), "Typology of Greek residency buildings", Research Report, Institute of Environmental Research, Sustainable Development and National Observatory of Athens, Athens. (in Greek)
  15. EnergyPlus (1997), https://energyplus.net/
  16. Eurocode (2004), Eurocode 8: Design of Structures for Earthquake Resistance-Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  17. Eurocode (2005), Eurocode 8: Design of Structures for Earthquake Resistance-Part 3: Assessment and Retrofitting of Buildings, European Committee for Standardization, Brussels, Belgium.
  18. Eurostat (2018), https://ec.europa.eu/eurostat/
  19. Fardis, M.N. and Panagiotakos, T.B. (1997), "Seismic design and response of bare and masonry-infilled reinforced concrete buildings. Part II: Infilled structures", J. Earthq. Eng., 1(3), 475-503. https://doi.org/10.1080/13632469708962375
  20. Favvata, M., Naoum, M. and Karayannis, C. (2013), "Limit states of RC structures with first floor irregularities", Struct. Eng. Mech., 47(6), 791-818. https://doi.org/10.12989/sem.2013.47.6.791
  21. FEMA-306 (1999), Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings.Basic Procedures Manual, Chapter 8, Infilled Frames, ATC, CA.
  22. Grondzik, W.T., Kwok, A.G., Stein, B. and Reynolds, J.S. (2010), Mechanical and Electrical Equipment for Buildings, 11th Edition, John Wiley & Sons, Inc.
  23. HAZUS99 (1999), Technical and User's Manual, Washington DC.
  24. Immobiliare (2018), https://www.immobiliare.it/
  25. Interactive Seismic Hazard Maps (2007), http://esse1-gis.mi.ingv.it/
  26. Julio, E.S., Branco, F. and Silva, V.D. (2003), "Structural rehabilitation of columns with reinforced concrete jacketing", Prog. Struct. Eng Mater., 5, 29-37. https://doi.org/10.1002/pse.140
  27. Kakaletsis, D.J. and Karayannis, C.G. (2008), "Influence of masonry strength and openings on infilled R/C frames under cycling loading", J. Earthq. Eng., 12(2), 197-221. https://doi.org/10.1080/13632460701299138
  28. Kalogeropoulos, G.I., Tsonos, G.A., Konstandinidis, D. and Tsetines, S. (2016), "Pre-earthquake and post-earthquake retrofitting of poorly detailed exterior RC beam-to-column joints", Eng. Struct., 109, 1-15. https://doi.org/10.1016/j.engstruct.2015.11.009
  29. Karlos, K. and Triantafillou, T.C. (2018), "Innovative integrated structural and energy retrofitting system for masonry walls using textile reinforced mortars combined with thermal insulation", European Conference on Earthquake Engineering, Thessaloniki, Greece, June.
  30. Koutas, L., Tetta, Z., Bournas, D.A. and Triantafillou, T.C. (2019), "A strengthening of concrete structures with Textile Reinforced Mortars (TRM): State-of-the-art review", Doctoral Dissertation, American Society of Civil Engineers.
  31. Koutas, L.N. and Bournas, D.A. (2019), "Out-of-plane strengthening of masonry-infilled RC frames with textilereinforced mortar jackets", J. Compos. Constr., 23(1), 04018079. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000911
  32. Koutas, L.N., Bousias, S.N. and Triantafillou, T.C. (2015a), "Seismic strengthening of masonry-infilled RC frames retrofitted with textile-reinforced mortar", J. Compos. Constr., 19(2), 04014048. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000507
  33. Koutas, L.N., Triantafillou, T.C. and Bousias, S.N. (2015b), "Analytical modelling of masonry-infilled RC frames with textile-reinforced mortar", J. Compos. Constr., 19(5), 04014082. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000553
  34. Marini, A., Passoni, C., Belleri, A., Feroldi, F., Preti, M., Metelli, G., Riva, P., Giurani, E. and Plizzari, G. (2017), "Combining seismic retrofit with energy refurbishment for the sustainable renovation of RC buildings: a proof of concept", Eur. J. Environ. Civil Eng., DOI: 10.1080/19648189.2017.1363665.
  35. Mastroberti, M., Bournas, D.A., Vona, M. and Palermo, V. (2018), "Combined seismic plus energy retrofitting for the existing RC buildings: Economic feasibility and environmental benefits", European Conference on Earthquake Engineering, Thessaloniki, Greece, June.
  36. Mondal, G. and Jain, S.K. (2008), "Lateral stiffness of masonry infilled Reinforced Concrete (RC) frames with central opening", Earthq. Spectra, 24(3), 701-723. https://doi.org/10.1193/1.2942376
  37. OpenSees (1999), http://opensees.berkeley.edu/
  38. Poljansek, M., Taucer, F., Chrysostomou, C., Kyriakides, N., Onoufriou, T., Roussis, P., Kotronis, P., Panagiotakos, T., Kosmopoulos, A. and Molina, J.R. (2014), "Seismic retrofitting of RC frames with RC infilling (SERFIN Project)", Research Report No. 227887, Joint Research Centre, Ispra, Italy.
  39. Raoof, S. and Bournas, D.A. (2017a), "TRM versus FRP in flexural strengthening of RC beams: Behaviour at high temperatures", Constr. Build. Mater., 154, 424-437. https://doi.org/10.1016/j.conbuildmat.2017.07.195
  40. Raoof, S. and Bournas, D.A. (2017b), "Bond between TRM versus FRP composites and concrete at high temperatures", Compos. Part B, 127, 150-165. https://doi.org/10.1016/j.compositesb.2017.05.064
  41. Tasnimi, A.A. and Mohebkhah, A. (2011), "Investigation on the behavior of brick-infilled steel frames with openings, experimental and analytical approaches", Eng. Struct., 33(3), 968-980. https://doi.org/10.1016/j.engstruct.2010.12.018
  42. Tetta, Z.C. and Bournas, D.A. (2016), "TRM vs FRP jacketing in shear strengthening of concrete members subjected to high temperatures", Compos. Part B, 106, 190-205. https://doi.org/10.1016/j.compositesb.2016.09.026
  43. Triantafillou, T.C., Karlos, K., Kapsalis, P. and Georgiou, L. (2018), "Innovative structural and energy retrofitting system for masonry walls using textile reinforced mortars combined with thermal insulation: In-plane Mechanical behavior", J. Compos. Constr., 22(5), 04018029. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000869
  44. Triantafillou, T.C., Karlos, K., Kefalou, K. and Argyropoulou, E. (2017), "An innovative structural and energy retrofitting system for URM walls using textile reinforced mortars combined with thermal insulation: Mechanical and fire behavior", Constr. Build. Mater., 133, 1-13. https://doi.org/10.1016/j.conbuildmat.2016.12.032
  45. Tsonos, G.A. (2008), "Effectiveness of CFRP-jackets and RCjackets in post-earthquake and pre-earthquake retrofitting of beam-column subassemblages", Eng. Struct., 30(3), 777-793. https://doi.org/10.1016/j.engstruct.2007.05.008
  46. Tsonos, G.A. (2014), "An innovative solution for strengthening of old R/C structures and for improving the FRP strengthening method", Struct. Monit. Mainten., 1(3), 323-338. https://doi.org/10.12989/SMM.2014.1.3.323
  47. Vamvatsikos, D. and Cornell, C.A. (2001), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141

피인용 문헌

  1. Modeling Strategies of Ductile Masonry Infills for the Reduction of the Seismic Vulnerability of RC Frames vol.6, 2020, https://doi.org/10.3389/fbuil.2020.601215
  2. Concrete confinement with TRM versus FRP jackets at elevated temperatures vol.53, pp.3, 2019, https://doi.org/10.1617/s11527-020-01492-x
  3. Integrated Seismic and Energy Retrofitting System for Masonry Walls Using Textile-Reinforced Mortars Combined with Thermal Insulation: Experimental, Analytical, and Numerical Study vol.4, pp.4, 2019, https://doi.org/10.3390/jcs4040189
  4. Ultimate shear strength prediction model for unreinforced masonry retrofitted externally with textile reinforced mortar vol.19, pp.6, 2019, https://doi.org/10.12989/eas.2020.19.6.411