DOI QR코드

DOI QR Code

Cyclic performance of steel fiber-reinforced concrete exterior beam-column joints

  • Oinam, Romanbabu M. (Department of Civil and Environmental Engineering, Indian Institute of Technology Tirupati) ;
  • Kumar, P.C. Ashwin (Department of Earthquake Engineering, Indian Institute of Technology Roorkee) ;
  • Sahoo, Dipti R. (Department of Civil Engineering, Indian Institute of Technology Delhi)
  • 투고 : 2019.02.01
  • 심사 : 2019.03.26
  • 발행 : 2019.05.25

초록

This study presents an experimental investigation on six beam-column joint specimens under the lateral cyclic loading. The aim was to explore the effectiveness of steel fiber-reinforced concrete (SFRC) in reducing the transverse shear stirrups in beam-column joints of the reinforced concrete (RC) frames with strong-columns and weak-beams. Two RC and four SFRC specimens with different types of reinforcement detailing and steel fibers of volume fraction in the range of 0.75-1.5% were tested under gradually increasing cyclic displacements. The main parameters investigated were lateral load-resisting capacity, hysteresis response, energy dissipation capacity, stiffness degradation, viscous damping variation, and mode of failure. Test results showed that the diagonally bent configuration of beam longitudinal bars in the beam-column joints resulted in the shear failure at the joint region against the flexural failure of beams having straight bar configurations. However, all SFRC specimens exhibited similar lateral strength, energy dissipation potential and mode of failure even in the absence of transverse steel in the beam-column joints. Finally, a methodology has been proposed to compute the shear strength of SFRC beam-column joints under the lateral loading condition.

키워드

과제정보

연구 과제 주관 기관 : Ministry of Human Resource Development

참고문헌

  1. Abbas, A.A., Syed, Mohsin, S.M. and Cotsovos, D.M. (2014), "Seismic response of steel fibre reinforced concrete beamcolumn joints", Eng. Struct., 59, 261-283. https://doi.org/10.1016/j.engstruct.2013.10.046.
  2. ACI-544.1R-96 (2002), Design Considerations for Steel Fiber Reinforced Concrete, American Concrete Institute, Farmington Hills, Michigan, USA.
  3. ACI 374.1-05 (2006), Acceptance Criteria for Moment Frames based on Structural Testing and Commentary-An ACI Standard, American Concrete Institute, Farmington Hills, MI, USA.
  4. Aoude, H., Belghiti, M., Cook, W.D. and Mitchell, D. (2012), "Response of steel fiber-reinforced concrete beams with and without stirrups", ACI Struct J., 109(3), 359-368.
  5. ASCE 41-13 (2013), Seismic Evaluation and Retrofit of Existing Buildings, American Society of Civil Engineers, Reston, Virginia, USA.
  6. ASTM C1609/C1609M (2006), Standard Test Method for Flexural Performance of Fiber-reinforced Concrete, American Society for Testing and Materials, West Conshohocken, PA, USA.
  7. Barbhuiya, S. and Choudhury, A.M. (2015), "A study on the size effect of RC beam-column connections under cyclic loading", Eng. Struct., 95, 1-7. https://doi.org/10.1016/j.engstruct.2015.03.052.
  8. Bayasi, Z. and Gebman, M. (2002), "Reduction of lateral reinforcement in seismic beam-column connection via application of steel fibers", ACI Struct. J., 99(78), 772-780. https://doi.org/10.1016/j.engstruct.2015.03.052.
  9. Chutarat, N. and Aboutaha, R.S. (2003), "Cyclic response of exterior reinforced concrete beam-column joints reinforced with headed bars-Experimental investigation", ACI Struct. J., 100(2), 259-264.
  10. Dinh, H.H., Parra-Montesinos, G.J. and Wight, J.K. (2010), "Shear strength of steel fiber reinforced concrete beams without stirrup reinforcement", ACI Struct. J., 107(5), 597-606.
  11. Eurocode 8 (2004), Design of Structures for Earthquake Resistance, British Standards Institution, London, UK.
  12. FEMA 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Applied Technology Council, Washington, DC, USA.
  13. Filiatrault, A., Ladicani, K. and Massicotte, B. (1994), "Seismic performance of code-designed fiber-reinforced concrete joints", ACI Struct. J., 91(54), 564-571.
  14. Gefken, P.R. and Ramey, M.R. (1989), "Increased joint hoop spacing in type 2 seismic joints using fiber reinforced concrete", ACI Struct. J., 56(19), 168-172.
  15. Harajli, M.H., Hout, M. and Jalkh, W. (1995), "Local bond stressslip behavior of reinforcing bars embedded in plain and fiber concrete", ACI Mater J., 92(4), 343-354.
  16. IS:10262 (2009), Concrete Mix Proportioning-Guidelines, Bureau of Indian Standards, New Delhi, India.
  17. IS:1893 (2016), Criteria for Earthquake Resistant Design of Structures, Bureau of Indian Standards, New Delhi, India.
  18. IS:456 (2000), Plain and Reinforced Concrete - Code of Practice, Bureau of Indian Standards, New Delhi, India.
  19. IS:516-1959 (2004), Methods of Tests for Strength of Concrete, Bureau of Indian Standards, New Delhi, India.
  20. IS:5816 (1999), Splitting Tensile Strength of Concrete, Bureau of Indian Standards, New Delhi, India.
  21. Jiuru, T., Chaobin, H., Kaijian, Y. and Yongcheng, Y. (1992), "Seismic behavior and shear strength of framed joint using steel-fiber reinforced concrete", ASCE J. Struct. Eng., 118(2), 341-358. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:2(341).
  22. Karayannis, C.G. and Golias, E. (2018), "Full scale tests of RC joints with minor to moderate seismic damage repaired using CFRP sheets", Earthq. Struct., 15(6), 617-627. https://doi.org/10.12989/eas.2018.15.6.617.
  23. Kheni, D., Scott, R.H., Deb, S.K. and Dutta, A. (2015), "Ductility enhancement in beam-column connections using hybrid fiberreinforced concrete", ACI Struct. J., 112(2), 167-178. https://doi.org/10.14359/51687405
  24. Kwak, Y.K., Eberhard, M.O., Kim, W.S. and Kim, J. (2002), "Shear strength of steel fiber-reinforced concrete beams without stirrups", ACI Struct J., 99(4), 530-538.
  25. Lee, H.H. (2007), "Shear strength and behavior of steel fiber reinforced concrete columns under seismic loading", Eng. Struct., 29(7), 1253-1262. https://doi.org/10.1016/j.engstruct.2006.08.016.
  26. Li, B., Lam, E.S., Cheng, Y., Wu, B. and Wang, Y. (2015), "Strengthening of non-seismically designed beam-column joints by ferrocement jackets with chamfers", Earthq. Struct., 8(5), 1017-1038. https://doi.org/10.12989/eas.2015.8.5.1017.
  27. Lim, T.Y., Paramasivam, P. and Lee, S.L. (1987), "Analytical model for tensile behavior of steel-fiber concrete", ACI Mater. J., 84(4), 286-298.
  28. Liu, C. (2006), "Seismic behaviour of beam-column joint subassemblies reinforced with steel fibres", Master's Thesis, Department of Civil Engineering, University of Canterbury, Christchurch, NZ.
  29. Lu, X., Urukap, T.H., Li, S. and Lin, F. (2012), "Seismic behavior of interior RC beam-column joints with additional bars under cyclic loading", Earthq. Struct., 3(1), 37-57. http://dx.doi.org/10.12989/eas.2012.3.1.037.
  30. Murty, C.V.R., Rai, D.C., Bajpai, K.K. and Jain, S.K. (2004), "Effectiveness of reinforcement details in exterior reinforced concrete beam-column joints for earthquake resistance", ACI Struct. J., 101(2), 149-156.
  31. Oh, H. (1992), "Flexural analysis of reinforced concrete beams containing steel fibers", ASCE J. Struct. Eng., 118(10), 2821-2835. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:10(2821).
  32. Oinam, R.M., Sahoo, D.R. and Sindhu, R. (2014), "Cyclic response of non-ductile RC frame with steel fibers at beamcolumn joints and plastic hinge regions", J. Earthq. Eng., 18(6), 908-928. https://doi.org/10.1080/13632469.2014.916239.
  33. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures, John Wiley and Sons, NY, USA.
  34. Park, S. and Mosalam, K.M. (2012), "Parameters for shear strength prediction of exterior beam-column joints without transverse reinforcement", Eng. Struct., 36, 198-209. https://doi.org/10.1016/j.engstruct.2011.11.017.
  35. Paulay, T. and Priestley, M. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley and Sons, Inc., NY, USA.
  36. Paulay, T., Park, R. and Priestley, M.J.N. (1978), "Reinforced concrete beam-column joints under seismic actions", ACI Struct. J., 75(11), 585-593.
  37. Rajagopal, S., Prabavathy, S. and Kang, T.H.-K. (2014), "Seismic behavior evaluation of exterior beam-column joints with headed or hooked bars using nonlinear finite element analysis", Earthq. Struct., 7(5), 861-875. https://doi.org/10.12989/eas.2014.7.5.861.
  38. Sahoo, D.R. and Kumar, N. (2015), "Monotonic behavior of largescale SFRC beams without stirrups", Eng. Struct., 92, 46-54. https://doi.org/10.1016/j.engstruct.2015.03.014.
  39. Sahoo, D.R. and Sharma, A. (2014), "Effect of steel fiber content on behavior of concrete beams with and without stirrups", ACI Struct. J., 111(5), 1157-1166 https://doi.org/10.14359/51686821
  40. Sahoo, D.R., Bhagat, S. and Reddy, T.C.V. (2016), "Experimental study on shear-span to effective-depth ratio of steel fiber reinforced concrete T-beams", Mater. Struct., 49(9), 3815-3830. https://doi.org/10.1617/s11527-015-0756-6.
  41. Sahoo, D.R., Solanki, A. and Kumar, A. (2015), "Influence of steel and polypropylene fibers on flexural behavior of RC beams", ASCE J. Mater. Civil Eng., 27(8), 04014232. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001193.
  42. Tsonos, A.G. (1992), "Seismic resistance of Type 2 exterior beamcolumn joints reinforced with inclined bars", ACI Struct. J., 89(1), 3-12.
  43. Tsonos, A.G. (2004), "Improvement of the earthquake resistance of R/C beam-column joints under the influence of Ρ-${\Delta}$ effect and axial force variations using inclined bars", Struct. Eng. Mech., 18(4), 389-410. https://doi.org/10.12989/sem.2004.18.4.389.
  44. Tsonos, A.G. (2007), "Cyclic load behaviour of reinforced concrete beam-column subassemblages of modern structures", ACI Struct. J., 194(4), 468-478. https://doi.org/10.2495/ERES050421
  45. Tsonos, A.G. (2014), "A new method for earthquake strengthening of old R/C structures without the use of conventional reinforcement", Struct. Eng. Mech., 52(2), 391-403. : http://dx.doi.org/10.12989/sem.2014.52.2.391.
  46. Yang, Y., Chen, Y., Chen, Z., Wang, N. and Yu, Y. (2018), "Experimental study on seismic behavior of RC beam-column joints retrofitted using prestressed steel strips", Earthq. Struct., 15(5), 499-511. https://doi.org/10.12989/eas.2018.15.5.499.