Journal of Digital Convergence (디지털융복합연구)

The Society of Digital Policy and Management (한국디지털정책학회)
권호 표지
DOI QR코드

DOI QR Code

Learning Outcomes of Design and Software Convergence Major for Engineering Education Accreditation

공학교육인증을 위한 디자인과 소프트웨어 융합전공의 학습성과

  • Choi, Ji-Eun (Department of Digital Arts and Technology, Inha University) ;
  • Jin, Sung-Hee (Division of Humanities and Liberal Arts, Hanbat National University)
  • 최지은 (인하대학교 디지털예술공학) ;
  • 진성희 (한밭대학교 인문교양학부)
  • Received : 2019.03.06
  • Accepted : 2019.05.20
  • Published : 2019.05.28
Download PDF
⟨ Previous Next ⟩

Abstract

In the rapidly changing society since the Fourth Industrial Revolution, the cultivation of convergence talents that can solve complex problems is emerging as an important issue. The purpose of this study is to propose the core competencies required to establish the program learning outcomes of the engineering and education curriculum, which is the accreditation standard of engineering education proposed by ABEEK(Accreditation Board for Engineering Education of Korea). Case study methodology was applied to achieve the purpose of the study. The case of analysis is design and software convergence majors of domestic and foreign universities. The educational objectives and course syllabi were analyzed. As a result of the research, four core competencies to be achieved in the design and software convergence majors were derived in addition to the ten program outcomes presented by ABEEK. New core competencies are convergence ability, creative thinking, entrepreneurship, and design ability. The result of this study is expected to contribute to the development of the evaluation system for the convergence engineering education field.

4차 산업혁명 이후 빠르게 변화하는 사회에서는 복잡한 문제를 해결할 수 있는 융합인재양성이 중요한 이슈로 대두되고 있다. 본 연구는 (사)한국공학교육인증원(이하, 공인원)에서 제시하고 있는 공학교육 인증기준인 융 복합분야의 프로그램 학습성과를 설정하기 위해 필요로 하는 핵심역량을 제안하는데 그 목적이 있다. 연구의 목적을 달성하기 위해 사례연구방법론을 적용하였다. 분석사례는 국내외 대학의 디자인과 소프트웨어 융합 전공이다. 선정된 전공의 교육목표 및 교과목의 강의계획서를 분석하였다. 연구결과 공인원에서 제시하고 있는 프로그램 학습성과 10개 외에 디자인 소프트웨어 융합전공에서 추가로 달성해야할 핵심역량 4가지가 도출되었다. 새로 추가된 핵심역량은 융합능력, 창의적 사고, 창업가능력, 디자인 능력이다. 이 연구의 결과는 향후 융합전공을 위한 공학교육인증 융 복합분야의 평가체계 개발에 기여할 수 있을 것으로 기대된다.

Keywords

DJTJBT_2019_v17n5_51_f0001.png 이미지

Fig. 1. Technologies by proportion of companies likely to adopt them by 2022(World Economic Forum, 2018)

DJTJBT_2019_v17n5_51_f0002.png 이미지

Fig. 2. Analysis procedures of Convergence Education

Table 1. 19 Industrial Engine Projects[14]

DJTJBT_2019_v17n5_51_t0001.png 이미지

Table 2. Comparing skills demand, 2018 vs. 2022, top ten(World Economic Forum, 2018)

DJTJBT_2019_v17n5_51_t0002.png 이미지

Table 3. Configuration for key competency elicitation

DJTJBT_2019_v17n5_51_t0003.png 이미지

Table 4. IT Core Competency

DJTJBT_2019_v17n5_51_t0004.png 이미지

Table 5. Global Software Development (GSD) Competencies

DJTJBT_2019_v17n5_51_t0005.png 이미지

Table 6. Analysis of Core Competencies for Design and Software Convergence Education

DJTJBT_2019_v17n5_51_t0006.png 이미지

Table 7. Courses Analysis of Domestic and Foreign Design and Software Majors

DJTJBT_2019_v17n5_51_t0007.png 이미지

Table 8. ‘Entrepreneurship Capability’ related keywords

DJTJBT_2019_v17n5_51_t0008.png 이미지

Table 9. Analysis results of Competencies included in Educational Objectives of Convergence Majors

DJTJBT_2019_v17n5_51_t0009.png 이미지

Table 10. Analysis results of Competencies included in Course Syllabi of Convergence Majors

DJTJBT_2019_v17n5_51_t0010.png 이미지

Table 11. Design and Software Convergence Program Outcomes(PO)

DJTJBT_2019_v17n5_51_t0011.png 이미지

References

  1. World Economic Forum. (2016). 36 best quotes from Davos 2016. World Economic Forum(WEF). https://www.weforum.org/agenda/2016/01/36-best-quotes-of-davos-2016/.
  2. S. H. Jin. (2019). A Case Study and Industry Demand Investigation on Technological Convergence Education Related to the 4th Industrial Revolution: Focused on electronics, software, and automobile. The Journal of the Korea Contents Association, 19(2), 412-418.
  3. ABEEK. (2014). CAC KCC2015. Seoul. ABEEK.
  4. H. S. Yang. (2015). STEAM based Middle school Film Design Teaching.Learning Program. Master dissertation. Graduate School of Education, Gyeongsang National Univeristy, Jinju.
  5. H. N. Lee. (2011). STEM Education in the United States for the Implementation of STEM Education. Science Creative, 161(2), 8-11.
  6. G. Yakman. (2010). What is the point of ste@m?-A brief over view. Retrieved from http://www.steamedu.com/2006-2010_Short_WHAT_IS_STEAM.pdf
  7. B. Maes. (2010). Stop talking about "STEM" education!"TEAMS" is way cooler!. Retrived from https://bertmaes.wordpress.com/2010/10/21/teams/
  8. J. Platz. (2007). How do you turn STEM into STEAM? Add the arts. Ohio Alliance for Arts Education. Retrieved June, 6, 2015.
  9. H. J. Park. (2012). A Study on analysis of Mathematical textbook based on STEAM Education. Master dissertation. Ewha Womans University, Seoul.
  10. Y. S. Baek et al. (2011). The Direction of Korean STEAM Education. Learner-centered curriculum education, 11, 149-171.
  11. M. Sanders. (2009). STEM, STEM education, STEM mania. The Technology and Engineering Teacher, 68(4), 20-26.
  12. Y. H. Kim. (2010). A Study on the Restructuring Policies of Social Engineers by Analyzing the Evasion of Science and Engineering. Human Resource Management Research, 17, 183-202.
  13. World Economic Forum. (2018). Future of Jobs Survey 2018. In World Economic Forum.
  14. Ministry of Trade, Industry and Energy. (2019) http://www.motie.go.kr/motie/py/brf/motiebriefing/motiebriefing2.do?brf_code_v=2#header
  15. C. S. Oh. (2000). A study on the design thinking of Modern Design. Archives of Design Research, 34, 87-101.
  16. G. E. Jo, & S. I. Kim. (2019). A study on competencies of designer in forth industrial revolution. Journal of the Korea Convergence Society, 10(2), 167-173. https://doi.org/10.15207/JKCS.2019.10.2.167
  17. Y. E. Song. (2018). A Study on the Test Model Development for Design Creativity Evaluation and Its Application. A Journal of Brand Design Association of Korea, 16(2), 117-134. https://doi.org/10.18852/BDAK.2018.16.2.117
  18. K. W. Jang., E. J. Lee, & S. W. Bae. (2013). Basice Creative Design. Gyeonggi : Life and Power Press.
  19. Y. S. Chong. (2015). Research on the development and effectiveness of content for a smart learning-based convergent design model: A Study Centering on Fostering Core Competencies via Creating Motion Pictures. Doctor dissertation. The Graduate School of Ewha Womans University, Seoul.
  20. M. Charn (2016). An Action Research on the Engineering.Design Convergence Education for the Creative Developer. Journal of Korea Culture Industry, 16(3), 23-31.
  21. B. L. Kim (2017). Design and Application of Competency-based SW Education Model. Master dissertation. Graduate School of Education, Seoul National University of Education, Seoul.
  22. Y. H. Hwang, K. J. Mun & Y. B. Park. (2016). Study of Perception on Programming and Computational Thinking and Attitude toward Science Learning of High School Students through Software Inquiry Activity: Focus on using Scratch and physical computing materials. Journal of the Korea Association for Science Education, 36(2), 325-335. https://doi.org/10.14697/jkase.2016.36.2.0325
  23. H. K. Lee. (2017). A development study of design principles for scaffolding reflection in computer supported collaborative problem solving. Master dissertation. Graduate School of Education, Seoul National University of Education, Seoul.
  24. P. Holtkamp, J. P. Jokinen & J. M. Pawlowski. (2015). Soft competency requirements in requirements engineering, software design, implementation, and testing. Journal of Systems and Software, 101, 136-146. https://doi.org/10.1016/j.jss.2014.12.010
  25. T. Anderson., R. Liam, D. R. Garrison., & W. Archer. (2001). Assessing teaching presence in a computer conferencing context.
  26. ABEEK. (2019). KCC2015 ABEEK Accreditation.
  27. ABEEK. (2019). 2019 KCC2015.
  28. Y. Y. Kim., J. S. Chung., C. K. Lee., & Y. J. Yi. (2010). An Analysis undergraduate Students' Perception of Core Competencies and Educational Needs. The Korean Journal of Educational Methodology Studies, 22(4), 1-20. https://doi.org/10.3946/kjme.2010.22.1.1
  29. K. S. Hwang, S. C. Kwon & B. J. Ko. (2015). Study on Analysis of the core competencies collegiate students recognized-J university targets students. Korean Journal of general Education, 2(2), 7-24. https://doi.org/10.24173/jge.2015.12.2.7
  30. K. M. Park. (2014). Development of Key Competency Factors for Measuring Study Outcomes in Science, Technology, Engineering, Arts, Mathematics(STEAM). The Korean Journal of Technology Education, 14(2), 234-257
  31. T. Lockwood (2010). Design thinking: Integrating innovation, customer experience, and brand value. Simon and Schuster.
  32. T. L. Stone. (2010). Managing the Design Process-Implementing Design: An Essential Manual for the Working Designer. Rockport Publishers.
  33. T. Cerovsek, T. Zupancic, & V. Kilar. (2010). Framework for model-based competency management for design in physical and virtual worlds. Journal of Information Technology in Construction (ITcon), 15(1), 1-22.
  34. J. A. Timmons., D. F. Muzyka., H. H. Stevenson & W. D. Bygrave. (1987). Opportunity recognition: the core of entrepreneurship. Frontiers of entrepreneurship research, 109-123.
  35. G. N. Chandler., & E. Jansen. (1992). The founder's self-assessed competence and venture performance. Journal of Business venturing, 7(3), 223-236. https://doi.org/10.1016/0883-9026(92)90028-P
  36. B. Smith & E. Morse. (2005), Entrepreneurial Competencies: Literature Review and Best Practices, Canada, Ottawa : Small Business Policy Branch, Industry.
  37. H. W. Yim. (2018). A Study on Development of SMEs Start-up Consulting Course byConvergence subject STEAM. Journal of Convergence for Information Technology, 8(6), 381-387. https://doi.org/10.22156/CS4SMB.2018.8.6.381
  38. M. J. Kim (2017). The Effect of Design Management Capability on Technology-Design Convergence. Master dissertation. Graduate School of Management of Technology, Sogang Univeristy, Seoul.
  39. S. I. Kim & S. J. Jun. (2013). The Development of Convergence Design Education Process. Journal of Digital Design, 13(2), 127-136. https://doi.org/10.17280/jdd.2013.13.2.013
  40. T. Y. Kim (2014). Proposal of an Interdisciplinary UX Design Education Program Model. Master dissertation. Graduate School Art, Chung Ang University, AnSeong.
  41. Y. J. Jeon. (2018). A study on the implication of AI development for design work force : focused on social contribution and core competence of future designers. Master dissertation. Grauate School of HongIk University, Seoul.