References
- P. Scott, P. Combrade, R. Kilian, A. Roth, P. Andresen, Y. Kim, Status Review of Initiation of Environmentally Assisted Cracking and Short Crack Growth, General Electric Global Research, France: Framatome ANP, Schenectady (NY), 2005 Dec 06. Report No. TR-1011788. Sponsored by Electric Power Research Institute, Palo Alto, CA.
- H.S. Chung, H.D. Kim, S.J. Oh, M.H. Boo, K.H. Na, E.S. Yun, Y.S. Kang, W.B. Kim, J.G. Lee, D.J. Kim, H.P. Kim, A review on the odscc of steam generator tubes in Korean NPPS, Nucl Eng Technol 45 (4) (2013s) 513-522. https://doi.org/10.5516/NET.07.2012.090
- J.H. Lee, Y.W. Park, M.H. Song, Y.J. Kim, S.I. Moon, Determination of equivalent single crack based on coalescence criterion of collinear axial cracks, Nucl. Eng. Des. 205 (2001) 1-11. https://doi.org/10.1016/S0029-5493(00)00368-X
- S.I. Moon, Y.J. Kim, J.H. Lee, M.H. Song, Y.W. Park, Structural integrity evaluation of steam generator tube with two parallel axial through-wall cracks, Nucl Eng Technol 36 (4) (2004) 327-337.
- S.I. Moon, Y.S. Chang, Y.J. Kim, J.H. Lee, M.H. Song, Y.H. Choi, Determination of failure pressure for tubes with two non-aligned through-wall cracks, Int. J. Fract. 144 (2) (2007) 91-101. https://doi.org/10.1007/s10704-007-9082-5
- K.I. Shin, K.B. Yoon, J.H. Park, Experimental and numerical study on the burst pressure of steam generator tubes with L- and U-type through-wall combination cracks, J. Mech. Sci. Technol. 27 (8) (2013) 2299-2304. https://doi.org/10.1007/s12206-013-0613-x
- S.I. Moon, Y.J. Kim, J.H. Lee, Y.W. Park, M.H. Song, Optimum local failure model of steam generator tubes with multiple axial through-wall cracks, Nucl. Eng. Des. 235 (17-19) (2005) 2099-2108. https://doi.org/10.1016/j.nucengdes.2005.05.024
- S.I. Moon, Y.S. Chang, Y.J. Kim, J.H. Lee, M.H. Song, Y.H. Choi, S.S. Hwang, Assessment of plastic collapse behavior for tubes with collinear cracks, Eng. Fract. Mech. 73 (3) (2006) 296-308. https://doi.org/10.1016/j.engfracmech.2005.07.009
- K. Kasza, S. Majumdar, I. Park, J. Franklin, Results from Pressure and Leak-rate Testing of Laboratory-degraded Steam Generator Tubes, Argonne National Laboratory, Argonne (IL), 2002. Nov Report No. NUREG/CR-6789 and ANL-01/31. Sponsored by U.S. Nuclear Regulatory Commission, Washington, DC.
- S. Majumdar, K. Kasza, S. Bakhtiari, J.Y. Park, J. Oras, J. Franklin, et al., Steam Generator Tube Integrity Issues: Pressurization Rate Effect, Failure Maps, Leak Rate Correlation Models, and Leak Rates in Restricted Areas, Argonne National Laboratory, Argonne (IL), 2009 July Report. No. NUREG/CR-6879 and ANL-05/16. Sponsored by U.S. Nuclear Regulatory Commission, Washington, DC.
- K.H. Eom, J.W. Kim, Y.J. Kim, J.S. Kim, Failure behavior of multiple-axial part-through-wall flaws in alloy 690TT steam generator tubes, J. Pressure Vessel Technol. 138 (2) (2015), 021406. https://doi.org/10.1115/1.4031663
- M.W. Lee, J.S. Kim, Y.J. Kim, J.W. Kim, Burst pressure estimation equations for steam generator tubes with multiple axial surface cracks, Int. J. Pres. Ves. Pip. 158 (2017) 59-68. https://doi.org/10.1016/j.ijpvp.2017.11.001
- J.Y. Jeon, Y.J. Kim, J.W. Kim, K.H. Lee, J.S. Kim, Numerical prediction of maximum load-carrying capacity of cracked alloy 690TT steam generator tubes, J. Pressure Vessel Technol. 138 (4) (2016), 041601. https://doi.org/10.1115/1.4031746
- M.W. Lee, J.S. Kim, J.Y. Jeon, Y.J. Kim, Comparison of numerical predictions with experimental burst pressures of tubes with multiple surface cracks, Eng. Fract. Mech. 201 (2018) 176-195. https://doi.org/10.1016/j.engfracmech.2018.06.016.
- H.S. Nam, Y.R. Oh, Y.J. Kim, J.S. Kim, N. Miura, Application of engineering ductile tearing simulation method to CRIEPI pipe test, Eng. Fract. Mech. 153 (2016) 128-142. https://doi.org/10.1016/j.engfracmech.2015.12.012
- H.W. Ryu, K.D. Bae, Y.J. Kim, J.J. Han, J.S. Kim, P.J. Budden, Ductile tearing simulation of Battelle pipe test using simplified stress-modified fracture strain concept, Fatig. Fract. Eng. Mater. Struct. 39 (11) (2016) 1391-1406. https://doi.org/10.1111/ffe.12456
- C.S. Oh, N.H. Kim, Y.J. Kim, J.H. Baek, Y.P. Kim, W.S. Kim, A finite element ductile failure simulation method using stress-modified fracture strain model, Eng. Fract. Mech. 78 (1) (2011) 124-137. https://doi.org/10.1016/j.engfracmech.2010.10.004
- F.A. McClintock, A criterion of ductile fracture by the growth of holes, J. Appl. Mech. 35 (2) (1968) 363-371. https://doi.org/10.1115/1.3601204
- J.R. Rice, D.M. Tracey, On the ductile enlargement of voids in triaxial stress fields, J. Mech. Phys. Solid. 17 (3) (1969) 201-217. https://doi.org/10.1016/0022-5096(69)90033-7
- J.W. Hancock, A.C. Mackenzie, On the mechanisms of ductile failure in high-strength steels subject to multi-axial stress states, J. Phys. Mech. Solids 24 (2-3) (1976) 147-160. https://doi.org/10.1016/0022-5096(76)90024-7
- G.R. Jonson, W.H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Eng. Fract. Mech. 21 (1) (1985) 31-48. https://doi.org/10.1016/0013-7944(85)90052-9
- Dassault, 2011, ABAQUS Version 6.11. User's Manual, Dassault Systemes Simulia, Providence, RI.
Cited by
- Burst pressure estimation of Alloy 690 axial cracked steam generator U-bend tubes using finite element damage analysis vol.53, pp.2, 2019, https://doi.org/10.1016/j.net.2020.07.024