References
- T.K. Kim, S. Noh, S.H. Kang, J.J. Park, H.J. Jin, M.K. Lee, J. Jang, C.K. Rhee, Current status and future prospective of advanced radiation resistant oxide dispersion strengthened steel (ARROS) development for nuclear reactor system applications, Nucl. Eng. Technol. 48 (2016) 572-594. https://doi.org/10.1016/j.net.2015.12.005
- C. Wang, C. Zhang, J. Zhao, Z. Yang, W. Liu, Microstructure evolution and yield strength of CLAM steel in low irradiation condition, Mater. Sci. Eng. A 682 (2017) 563-568. https://doi.org/10.1016/j.msea.2016.11.057
- W. Wang, S. Liu, G. Xu, B. Zhang, Q. Huang, Effect of thermal aging on microstructure and mechanical properties of China low-activation martensitic steel at 550 degrees C, Nucl. Eng. Technol. 48 (2016) 518-524. https://doi.org/10.1016/j.net.2015.11.004
- S.N. Zhu, C. Zhang, Z.G. Yang, C.C. Wang, Hydrogen's influence on reduced activation ferritic/martensitic steels' elastic properties: density functional theory combined with experiment, Nucl. Eng. Technol. 49 (2017) 1748-1751. https://doi.org/10.1016/j.net.2017.08.021
- C. Wang, C. Zhang, Z. Yang, J. Zhao, Multiscale simulation of yield strength in reduced-activation ferritic/martensitic steel, Nucl. Eng. Technol. 49 (2017) 569-575. https://doi.org/10.1016/j.net.2016.10.006
- Y.-Y. Wang, J.-H. Ding, W.-B. Liu, S.-S. Huang, X.-Q. Ke, Y.-Z. Wang, C. Zhang, J.-J. Zhao, Irradiation-induced void evolution in iron: a phase-field approach with atomistic derived parameters, Chin. Phys. B (2017) 26.
- J. Brnic, G. Turkalj, M. Canadija, S. Krscanski, M. Brcic, D. Lanc, Deformation behaviour and material properties of austenitic heat-resistant steel X15CrNiSi25-20 subjected to high temperatures and creep, Mater. Des. 69 (2015) 219-229. https://doi.org/10.1016/j.matdes.2014.12.062
- C.C. Eiselt, H. Schendzielorz, A. Seubert, B. Hary, Y. de Carlan, P. Diano, B. Perrin, D. Cedat, ODS-materials for high temperature applications in advanced nuclear systems, Nucl. Mater. Energy 9 (2016) 22-28. https://doi.org/10.1016/j.nme.2016.08.017
-
W. Wang, J. Chen, G. Xu, Effect of thermal aging on grain structural characteristic and Ductile-to-Brittle transition temperature of CLAM steel at
$550^{\circ}C$ , Fusion Eng. Des. 115 (2017) 74-79. https://doi.org/10.1016/j.fusengdes.2016.12.037 - S.J. Zinkle, J.L. Boutard, D.T. Hoelzer, A. Kimura, R. Lindau, G.R. Odette, M. Rieth, L. Tan, H. Tanigawa, Development of next generation tempered and ODS reduced activation ferritic/martensitic steels for fusion energy applications, Nucl. Fusion 57 (2017).
- J.-H. Baek, T.S. Byun, S.A. Maloy, M.B. Toloczko, Investigation of temperature dependence of fracture toughness in high-dose HT9 steel using smallspecimen reuse technique, J. Nucl. Mater. 444 (2014) 206-213. https://doi.org/10.1016/j.jnucmat.2013.09.029
- X. Chen, Y. Huang, B. Madigan, J. Zhou, An overview of the welding technologies of CLAM steels for fusion application, Fusion Eng. Des. 87 (2012) 1639-1646. https://doi.org/10.1016/j.fusengdes.2012.06.009
- Q. Huang, Development status of CLAM steel for fusion application, J. Nucl. Mater. 455 (2014) 649-654. https://doi.org/10.1016/j.jnucmat.2014.08.055
- M.G. Park, C.H. Lee, J. Moon, J.Y. Park, T.-H. Lee, N. Kang, H. Chan Kim, Effect of microstructural evolution by isothermal aging on the mechanical properties of 9Cr-1WVTa reduced activation ferritic/martensitic steels, J. Nucl. Mater. 485 (2017) 15-22. https://doi.org/10.1016/j.jnucmat.2016.12.018
- L. Tan, Y. Katoh, A.A.F. Tavassoli, J. Henry, M. Rieth, H. Sakasegawa, H. Tanigawa, Q. Huang, Recent status and improvement of reduced-activation ferritic-martensitic steels for high-temperature service, J. Nucl. Mater. 479 (2016) 515-523. https://doi.org/10.1016/j.jnucmat.2016.07.054
- K.S. Cho, S.I. Kim, S.S. Park, W.S. Choi, H.K. Moon, H. Kwon, Effect of Ti addition on carbide modification and the microscopic simulation of impact toughness in high-carbon Cr-V tool steels, Metall. Mater. Trans. A 47 (2015) 26-32. https://doi.org/10.1007/s11661-015-3216-6
- N.A. Giang, M. Kuna, G. Huetter, Influence of carbide particles on crack initiation and propagation with competing ductile-brittle transition in ferritic steel, Theor. Appl. Fract. Mech. 92 (2017) 89-98. https://doi.org/10.1016/j.tafmec.2017.05.015
- J.E. Jam, M. Abolghasemzadeh, H. Salavati, Y. Alizadeh, The effect of notch tip position on the charpy impact energy for bainitic and martensitic functionally graded steels, Strength Mater. 46 (2014) 700-716. https://doi.org/10.1007/s11223-014-9604-0
- R. Wu, J. Li, Y. Su, S. Liu, Z. Yu, Improved uniformity of hardness by continuous low temperature bainitic transformation in prehardened mold steel with large section, Mater. Sci. Eng. A 706 (2017) 15-21. https://doi.org/10.1016/j.msea.2017.08.104
- C. Wang, C. Zhang, Z. Yang, J. Su, Y. Weng, Analysis of fracture toughness in high CoeNi secondary hardening steel using FEM, Mater. Sci. Eng. A 646 (2015) 1-7. https://doi.org/10.1016/j.msea.2015.08.003
- G. Seisson, D. Hebert, I. Bertron, J.M. Chevalier, L. Hallo, E. Lescoute, L. Videau, P. Combis, F. Guillet, M. Boustie, L. Berthe, Dynamic cratering of graphite: experimental results and simulations, Int. J. Impact Eng. 63 (2014) 18-28. https://doi.org/10.1016/j.ijimpeng.2013.08.001
- R. Cao, J. Li, D.S. Liu, J.Y. Ma, J.H. Chen, Micromechanism of decrease of impact toughness in coarse-grain heat-affected zone of HSLA steel with increasing welding heat input, Metall. Mater. Trans. A 46 (2015) 2999-3014. https://doi.org/10.1007/s11661-015-2916-2
- V. Carollo, J. Reinoso, M. Paggi, A 3D finite strain model for intralayer and interlayer crack simulation coupling the phase field approach and cohesive zone model, Comps. Struct. 182 (2017) 636-651. https://doi.org/10.1016/j.compstruct.2017.08.095
- Y. Xu, Y. Guo, L. Liang, Y. Liu, X. Wang, A unified cohesive zone model for simulating adhesive failure of composite structures and its parameter identification, Comps. Struct. 182 (2017) 555-565. https://doi.org/10.1016/j.compstruct.2017.09.012
- A. Pineau, Modeling ductile to brittle fracture transition in steels-micromechanical and physical challenges, Int. J. Fract. 150 (2008) 129-156. https://doi.org/10.1007/s10704-008-9232-4
- H. Zhang, S. Li, G. Liu, Y. Wang, Effects of hot working on the microstructure and thermal ageing impact fracture behaviors of Z3CN20-09M duplex stainless steel, Acta Metall. Sin. 53 (2017) 531-538.
- S.S.M. Tavares, M.B. Silva, M.C.S. de Macedo, T.R. Strohaecker, V.M. Costa, Characterization of fracture behavior of a Ti alloyed supermartensitic 12%Cr stainless steel using Charpy instrumented impact tests, Eng. Fail. Anal. 82 (2017) 695-702. https://doi.org/10.1016/j.engfailanal.2017.06.002
- M. Perez, M. Dumont, D. Acevedo-Reyes, Implementation of classical nucleation and growth theories for precipitation, Acta Mater. 56 (2008) 2119-2132. https://doi.org/10.1016/j.actamat.2007.12.050
- P. Wang, F. Liu, Y.P. Lu, C.L. Yang, G.C. Yang, Y.H. Zhou, Grain refinement and coarsening in hypercooled solidification of eutectic alloy, J. Cryst. Growth 310 (2008) 4309-4313. https://doi.org/10.1016/j.jcrysgro.2008.07.037
- C. Wang, C. Zhang, Z. Yang, J. Su, Y. Weng, Microstructure analysis and yield strength simulation in high CoeNi secondary hardening steel, Mater. Sci. Eng. A 669 (2016) 312-317. https://doi.org/10.1016/j.msea.2016.05.069
- P.V. Bizyukov, S.R. Giese, Effects of Zr, Ti, and Al additions on nonmetallic inclusions and impact toughness of cast low-alloy steel, J. Mater. Eng. Perform. 26 (2017) 1878-1889. https://doi.org/10.1007/s11665-017-2583-0
- A. Ghosh, P. Modak, R. Dutta, D. Chakrabarti, Effect of MnS inclusion and crystallographic texture on anisotropy in Charpy impact toughness of low carbon ferritic steel, Mater. Sci. Eng. A 654 (2016) 298-308. https://doi.org/10.1016/j.msea.2015.12.047
Cited by
- Application of cohesive zone model to large scale circumferential through-wall and 360° surface cracked pipes under static and dynamic loadings vol.53, pp.3, 2019, https://doi.org/10.1016/j.net.2020.07.041