Fig. 1. Ballistic curve according to charges
Fig. 2. Calculation procedure of EFD based on charge
Fig. 3. Three-dimensional target with EMD(revised from Morris, 2012)
Fig. 4. Expansion of effective pattern(revised from Morris, 2012)
Fig. 5. The weapon area is next to the target area.(revised from Morris, 2012)
Fig. 6. The weapon area fully covered the target area.(revised from Morris, 2012)
Fig. 7. The Weapon area partially covered the target area.(revised from Morris, 2012)
Fig. 8. Fractional coverage function in the range direction(revised from Morris, 2012)
Fig. 9. Firing table
Table 1. Target-damage criteria about building targets
Table 2. MAEs for structural damage to buildings (notional data)
Table 3. Regression models of MAEs by cartridge's weights
Table 4. Weapons for verification
Table 5. Number of shoots calculation result (building size : 75m×80m×30m)
Table 6. Results of simulations
Table 7. Paired samples statistics
Table 8. Results of paired samples t-test
Table 9. Results of paired samples test according to range
References
- Cho, H.Y. and Chung, B.H. (2008) "Study of estimation model for wartime stockpile requirement of intelligent ammunition against enemy armored vehicles", Journal of Military Operations Research Society of korea, 34(2), 143-162.
- Choi, Y.H., Lee, K.T., Pyun, J.J., and Jang, Y.C., (2017) "A study on PK(Probability of Kill) calculation method of the direct fire weapon system using simulation", Journal of the Korea Institute of Military Science and Technology, 26(3), 115-123.
- Department of the Army (1970) "QSTAG 224 Manual Fire Direction Equipment and Methods of Engagement for Post", Available at https://www.globalsecurity.org/military/library/policy/army/fm/6-40/Ch7.htm (Accessed November 1. 2018).
- Kim, T.G.,(2013), "Analysis procedure for fire power suppression on enemy artillery base using FASCAM", Journal of the Korea Institute of Military Science and Technology, 18(6), 743-754. https://doi.org/10.9766/KIMST.2015.18.6.743
- Park, J.H., (2016) "A comparative analysis of damage estimation methodologies on building targets", Ajou University, 12-14.
- Park, J.H., Choi, S.Y. and Kim, Y.H., (2015) "A study on simple methodology of distruction effects analysis 3 dimensional building target's by weapon systems", Journal of the Korea Society for Simulation, 24(3), 89-96. https://doi.org/10.9709/JKSS.2015.24.3.089
- Moris Driels (2012) "Weaponeering conventional weapon effectiveness second edition", AIAA. Pres, Virginia. USA.
- US AMDRC (1977) "Engineering design handbook : Army weapon systems analysis, part one", 15-7-15-8.