한국주조공학회지 (Journal of Korea Foundry Society)

  • 제39권5호
  • /
  • Pages.94-101
  • /
  • 2019
  • /
  • 1598-706X(pISSN)
  • /
  • 2288-8381(eISSN)
한국주조공학회 (Korea Foundry Society)
권호 표지
DOI QR코드

DOI QR Code

경사냉각판을 이용한 반응고 알루미늄 합금의 미세조직 및 성형성 평가

Evaluation of Microstructure and Formability of Rheocasting Aluminum Alloy by Inclined Cooling Plate

  • 황범규 (마그마엔지니어링코리아) ;
  • 김순국 (동의대학교 IT융합부품소재공과대학 신소재공학부) ;
  • 김덕현 (경상대학교 나노신소재공학부) ;
  • 임수근 (경상대학교 재료공정융합공학과, 항공기부품 기술연구소)
  • Hwang, Bum-Kyu (MAGMA Engineering Korea Co., LTD.) ;
  • Kim, Soon-Kook (Dept. of Advanced Material Engineering, Dong-Eui Univ.) ;
  • Kim, Duck-Hyun (Gyeongsang National Univ.) ;
  • Lim, Su-Gun (Dept. of Metallurgical and Materials Engineering, ReCAPT, Gyeongsang National Univ.)
  • 투고 : 2019.09.16
  • 심사 : 2019.10.10
  • 발행 : 2019.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study investigated the microstructure properties of A356 and AC8A alloys with a rheocasting mold using an inclined cooling plate. In addition, a formability evaluation was performed according to the solid fraction. Regardless of the position, the overall microstructure was shown to be uniform and a finer crystal structure was obtained as the solid fraction increased. The study confirmed that the molding pattern changed according to the solid fraction and that the spherical α-Al and eutectic α were identified. The results of the formability according to the solid fraction of A356 and AC8A alloys were similar to the simulation results.

키워드

참고문헌

  1. Tsai FY and Kao PW, "Improvement of mechanical properties of a cast Al-Si bas alloy by friction stir processing", 80 (2012) 40-42. https://doi.org/10.1016/j.matlet.2012.04.073
  2. J Jpn. Inst. Light Met., The Structure and Properties of aluminum, The Japan Institute of Light Metals, Tokyo (1991) 231.
  3. Kim WB, Kim JH and Ye BJ, J. Korea Foundry Society, "Characteristics of modification in the hypoeutectic Al-Si alloys", 18 (1998) 604-612.
  4. Jung BJ, Soichiro Ichihata, Tatsuo Sato, Hiroyasu Tesuka, Akihiko Kamio, Seiji Saikawa and Kiyoshi Nakai, J.Jpn. Inst. Light Met., "Semi-solid solidification microstructures of a strain-induced Al-7%Si-0.5%Mg alloy", 47 (1997) 626. https://doi.org/10.2464/jilm.47.626
  5. Murali S, Arvind TS, Raman KS and Murthy KSS, Materials Transactions, "Fatigue properties of sand cast, stircast and extruded Al-7Si-0.3Mg alloy with trace additions of Be and Mn", 38 (1997) 28. https://doi.org/10.2320/matertrans1989.38.28
  6. Yim CD and Shin KS, J. Korea Foundry Society, "Microstructural change in rheocast AZ91D magnesium alloys with stirring rate and isothermal stirring temperature", 23 (2003) 130-136.
  7. Kim SW, Kang YC, Kim DK And Sinji Kumai, J. Korea Foundry Society, "Microstructural and mechanical charateristics of A356 ally cast by semi-solid squeeze process", 20 (2000) 269-276.
  8. Moon JY, Kim HS, and Hong CP, J. Korea Foundry Society, "Flow characteristic of hybrid-lower arm on casting parameters in rheocasting process", 28 (2008) 231-236.
  9. Kim DH, Shim SY, Kim YH and Lim SG, J. Korea Foundry Society, "RRA treatment of semi-solid Al-Zn-Mg Cu Al alloy fabricated by cooling plate", 29 (2009) 265-269.
  10. Kim DH, Jung HJ, Shim SY, Lim SY and Lee SY, J. Korea Foundry Society, "Thixo extrusion and reheating characteristics of semi solid A356 alloy", 34 (2014) 123-129. https://doi.org/10.7777/jkfs.2014.34.4.123
  11. Shim SY, Park HW, Jeong IS and Lim SG, World Scientific, "The optimizing conditions by taguchi method for fabricasting semi-solid Al-Zn-Mg alloy slurry by cooling plate method", 17 (2010) 185-188.
  12. Bonollo F, Chiarmetta G, Gramegna N and Parona P, Proc. Conf., "Numerical simulation of semi-solid casting of an automotive component", (2000) 1-6.