DOI QR코드

DOI QR Code

An experimental study on the hydraulic fracturing of radial horizontal wells

  • Yan, Chuanliang (School of Petroleum Engineering, China University of Petroleum (East China)) ;
  • Ren, Xu (School of Petroleum Engineering, China University of Petroleum (East China)) ;
  • Cheng, Yuanfang (School of Petroleum Engineering, China University of Petroleum (East China)) ;
  • Zhao, Kai (College of Petroleum Engineering, Xi'an Shiyou University) ;
  • Deng, Fucheng (School of Mechanical Engineering, Yangtze University) ;
  • Liang, Qimin (Research Institute of Petroleum Exploration and Development, CNPC) ;
  • Zhang, Jincheng (Sinopec Research Institute of Petroleum Engineering) ;
  • Li, Yang (School of Petroleum Engineering, China University of Petroleum (East China)) ;
  • Li, Qingchao (School of Petroleum Engineering, China University of Petroleum (East China))
  • 투고 : 2018.02.23
  • 심사 : 2019.03.17
  • 발행 : 2019.04.30

초록

Combining the radial well drilling and hydraulic fracturing technique, the production capacity of the reservoirs with low-permeability can be improved effectively. Due to the existence of radial holes, the stress around the well is redistributed, and the initiation and propagation of hydraulic fractures are different with those in traditional hydraulic fracturing. Therefore, it is necessary to study the influences of radial horizontal wells on hydraulic fracturing. The laboratory experiment was conducted to simulate the hydraulic fracturing on the physical model with radial holes. The experimental results showed that, compared with the borehole without radial holes, the sample with radial hole in the direction of maximum horizontal stress was fractured with significantly lower pressure. As the angle between direction of the horizontal hole and the maximum horizontal stress increased, the breakdown pressure grew. While when the radial hole was drilled towards the direction of the minimum horizontal stress, the breakdown pressure increased to that needed in the borehole without radial holes. When the angle between the radial hole and the maximum horizontal stress increase, the pressure required to propagate the fractures grew apparently, and the fracture become complex. Meanwhile, the deeper the radial hole drilled, the less the pressure was needed for fracturing.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation, Qingdao National Laboratory for Marine Science and Technology

참고문헌

  1. Adams, J. and Rowe, C. (2013), "Differentiating applications of hydraulic fracturing", Proceedings of the ISRM International Conference for Effective and Sustainable Hydraulic Fracturing, Brisbane, Australia, May.
  2. Cheng, Y., Xu, T., Wu, B.L.N. and Sun, Y. (2013), "Experimental study on the hydraulic fractures' morphology of coal bed", Nat. Gas. Geosci., 24(1), 134-137.
  3. Chi, H., Li, G., Huang, Z., Tian, S. and Song, X. (2015), "Maximum drillable length of the radial horizontal micro-hole drilled with multiple high-pressure water jets", J. Nat. Gas Sci. Eng., 26, 1042-1049. https://doi.org/10.1016/j.jngse.2015.07.044
  4. Cinelli, S.D. and Kamel, A.H. (2013), "Novel technique to drill horizontal laterals revitalizes aging field", Proceedings of the SPE/IADC Drilling Conference, Amsterdam, The Netherlands, March.
  5. Dutta, R., Lee, C.H., Odumabo, S., Ye, P., Walker, S.C., Karpyn, Z.T. and Luis, F. (2014), "Experimental investigation of fracturing-fluid migration caused by spontaneous imbibition in fractured low-permeability sands", SPE Reserv. Eval. Eng., 17(1), 74-81. https://doi.org/10.2118/154939-PA
  6. Gandossi, L. (2013), "An overview of hydraulic fracturing and other formation stimulation technologies for shale gas production", Eur. Commisison Jt. Res. Cent. Tech. Reports, 26347.
  7. Ghasemi, S.H. and Nowak, A.S. (2018), "Reliability analysis of circular tunnel with consideration of the strength limit state", Geomech. Eng., 15(3), 879-888. https://doi.org/10.12989/GAE.2018.15.3.879
  8. Guo, T., Liu, B., Qu, Z., Gong, D. and Xin, L. (2017), "Study on Initiation Mechanisms of Hydraulic Fracture Guided by Vertical Multi-radial Boreholes". Rock Mech. Rock Eng., 50(7), 1767-1785. https://doi.org/10.1007/s00603-017-1205-3
  9. Hammond, G.P. and O'Grady, A. (2017), "Indicative energy technology assessment of UK shale gas extraction", Appl. Energy, 185, 1907-1918. https://doi.org/10.1016/j.apenergy.2016.02.024
  10. Ji, Y. and Li, X. (2018), "Analysis on Geo-stress and casing damage based on fluid-solid coupling for Q9G3 block in Jibei oil field", Geomech. Eng., 15(1), 677-686. https://doi.org/10.12989/GAE.2018.15.1.677
  11. Jia, L., Chen, M., Sun, L., Sun, Z., Zhang, W. and Jin, Y. (2013), "Experimental study on propagation of hydraulic fracture in volcanic rocks using industrial CT technology", Petrol. Explor. Dev., 40(3), 405-408. https://doi.org/10.1016/S1876-3804(13)60051-8
  12. Kamel, A. H. (2016), "RJD: A cost effective frackless solution for production enhancement in marginal fields", Proceedings of the SPE Eastern Regional Meeting, Canton, Ohio, U.S.A., September.
  13. Li, G. and Shen, Z. (2005), "Advances in researches and applications of water jet theory in petroleum engineering", Petrol. Explor. Dev., 32(1), 96-99.
  14. Li, X., Jaffal, H., Feng, Y., El Mohtar, C. and Gray, K.E. (2018), "Wellbore breakouts: Mohr-Coulomb plastic rock deformation, fluid seepage, and time-dependent mudcake buildup", J. Nat. Gas Sci. Eng., 52, 515-528. https://doi.org/10.1016/j.jngse.2018.02.006
  15. Marbun, B.T.H., Zulkhifly, S., Arliyando, L. and Putra, S.K. (2011), "Review of ultrashort-radius radial system (URRS)", Proceedings of the International Petroleum Technology Conference, Bangkok, Thailand, November.
  16. Moradi, S.S.T., Nikolaev, N., Chudinova, I. and Martel, A.S. (2018), "Geomechanical study of well stability in high-pressure, high-temperature conditions", Geomech. Eng., 16(3), 331-339. https://doi.org/10.12989/gae.2018.16.3.331
  17. Qi, W., Yun, X., Xiaoquan, W., Tengfei, W. and Zhang, S. (2012), "Volume fracturing technology of unconventional reservoirs: Connotation, design optimization and implementation", Petrol. Explor. Dev., 39(3), 377-384. https://doi.org/10.1016/S1876-3804(12)60054-8
  18. Saberhosseini, S.E., Keshavarzi, R. and Ahangari, K. (2014), "A new geomechanical approach to investigate the role of in-situ stresses and pore pressure on hydraulic fracture pressure profile in vertical and horizontal oil wells", Geomech. Eng., 7(3), 233-246. https://doi.org/10.12989/gae.2014.7.3.233
  19. Wang, Z., Liao, Y., Zhang, W., Sun, B., Sun, X. and Deng, X. (2018), "Coupled temperature field model of gas-hydrate formation for thermal fluid fracturing", Appl. Therm. Eng., 133, 160-169. https://doi.org/10.1016/j.applthermaleng.2018.01.039
  20. Yan, C., Deng, J., Cheng, Y., Yan, X., Yuan, J. and Deng, F. (2017), "Rock mechanics and wellbore stability in Dongfang 1-1 Gas Field in South China Sea", Geomech. Eng., 12(3), 465-481. https://doi.org/10.12989/gae.2017.12.3.465
  21. Yan, C., Li, Y., Cheng, Y., Wang, W., Song, B. and Deng, F. (2018), "Sand production evaluation during gas production from natural gas hydrates", J. Nat. Gas Sci. Eng., 57, 77-88. https://doi.org/10.1016/j.jngse.2018.07.006
  22. Ye, Z., Sesetty, V. and Ghassemi, A. (2018), "Experimental and numerical investigation of shear stimulation and permeability evolution in shales", Proceedings of the SPE Hydraulic Fracturing Technology Conference and Exhibition, Muscat, Oman, October.
  23. Yilmaz, Y., Cetin, B. and Kahnemouei, V.B. (2017), "Compressive strength characteristics of cement treated sand prepared by static compaction method", Geomech. Eng., 12(6), 935-948. https://doi.org/10.12989/gae.2017.12.6.935
  24. Zhou, L., Zhu, Z., Liu, B. and Fan, Y. (2018), "The effect of radial cracks on tunnel stability", Geomech. Eng., 15(2), 721-728. https://doi.org/10.12989/GAE.2018.15.2.721
  25. Zhou, W., Banerjee, R., Poe, B. D., Spath, J. and Thambynayagam, M. (2013), "Semianalytical production simulation of complex hydraulic-fracture networks", SPE J., 19(1), 6-18. https://doi.org/10.2118/157367-PA
  26. Zhu, H., Shen, J. and Zhang, F. (2019), "A fracture conductivity model for channel fracturing and its implementation with discrete element method", J. Petrol. Sci. Eng., 172, 149-161. https://doi.org/10.1016/j.petrol.2018.09.054
  27. Zhu, H.Y., Deng, J.G., Liu, S.J., Wen, M., Peng, C.Y., Li, J.R. and Dong, G. (2014), "Hydraulic fracturing experiments of highly deviated well with oriented perforation technique", Geomech. Eng., 6(2), 153-172. https://doi.org/10.12989/gae.2014.6.2.153

피인용 문헌

  1. Fracability Evaluation Method and Influencing Factors of the Tight Sandstone Reservoir vol.2021, 2019, https://doi.org/10.1155/2021/7092143
  2. Numerical simulation and optimization of hydraulic fracturing operation in a sandstone-mudstone interbedded reservoir vol.14, pp.21, 2021, https://doi.org/10.1007/s12517-021-08506-0