Fig. 1 Fabrication Procedure of Smart Paints
Fig. 4 Schematic Diagram of Experimental Setting
Fig. 5 Experiment Setting of Substrate
Fig. 2 Samples of Production [(a) : Uncoated BaTiO3, (b) : Uncoated SrTiO3, (c) : Coated BaTiO3,(d) : Coated SrTiO3]
Fig. 3 SEM Images of Paints [(a) : Uncoated BaTiO3, (b) : Uncoated SrTiO3, (c) : Coated BaTiO3,(d) : Coated SrTiO3]
Fig. 6 Temperature and Resistance Comparison Graphs by BaTiO3
Fig. 7 Temperature and Resistance Comparison Graphs by SrTiO3
Table 1 Measurement of Basic Resistance
참고문헌
- H. I. Kim, C. M. You, E. S. Kang and H. U. Oh, "Thermal design of electronic for controlling X-band antenna of compact advanced satellite," Journal of Aerospace System Engineering, vol. 12, no. 1, pp. 57-67, Feb. 2018. https://doi.org/10.20910/JASE.2018.12.1.57
- J. H. Kim, H. Y. Jun and B. S. Kim, "Reduction of the conductive thermal model and detailed temperatures recovery for a satellite panel," Journal of Computational Fluids Engineering, vol. 22, no. 3, pp. 9-16, Sep. 2017. https://doi.org/10.6112/kscfe.2017.22.3.009
- J. Y. Sim, S. M. Kwon, J. C. Kim, S. W. Kang and T. K. Kim, "Development of hydrogen generator for 1kW PEM fuel cell systems of high-altitude unmanned aerial vehicles," Proc. of KSAS Fall Conference 2015, vol. 2015, no. 11, pp. 308-310, Nov. 2015.
- Y. S. Yoon and G. H. Choi, "Design and development status of a thermal protection system for a spaceplane," Journal of Aerospace System Engineering, vol. 12, no. 3, pp. 79-85, Jun. 2018. https://doi.org/10.20910/JASE.2018.12.3.79
- B. K. Koo, "Fabrication and characteristics of NTC Thermistor for low temperature sintering," Journal of the Korean Crystal Growth and Crystal Technology, vol. 28, no. 1, pp. 28-37, Feb. 2018.- https://doi.org/10.6111/JKCGCT.2018.28.1.028
- Y. H. Cho, D. Y. Kwon, J. H. Won and J. B. Jang, "A monitoring methodology for the thermal sensor of NTC Thermistor of GEO-satellite," Proc. of KIEE Conference, vol. 2016, no. 10, pp. 182-183, Oct. 2016.
- B. Y. Hang and Y. I. Lee, "Synthesis and optical property of BaTiO3 nanoparticles using a salt-assisted ultrasonic spray pyrolysis process," Journal of Korean Powder Metallurgy Institute, vol. 24, no. 4, pp. 326-331, Aug. 2017. https://doi.org/10.4150/KPMI.2017.24.4.326
- K. S. Moon, "Effect of Na2CO3 addition on grain growth behavior and solid-state single crystal growth in the Na0.5Bi0.5TiO3-BaTiO3 system," Journal of Korean Powder Metallurgy Institute, vol. 25, no. 2, pp. 104-108, Apr. 2018. https://doi.org/10.4150/KPMI.2018.25.2.104
-
L. Zhongyang, Y. Bin, W. Silei, W. Mengtao and B. Pibin, "Terahertz wave generation via stimulated polariton scattering in
$BaTiO_3$ bulk crystal with high parametric gain," Journal of Current Optics and Photonics, vol. 2, no. 3, pp. 261-268, June 2018. -
K. C. Bea, J. I. Park and H. R. Lee "Magneto-optical properties of
$^{55}Mn-doped\;SrTiO_3$ single crystal," Journal of the Korean Magnetics Society, vol. 21, no. 6, pp. 208-213, Dec. 2011. https://doi.org/10.4283/JKMS.2011.21.6.208 -
M. B. Lee, "Ferroelectric properties of
$Bi_4\;Ti_3\;O_{12}$ thin films deposited on Si and$SrTiO_3$ substrates according to crystal structure and orientation," Journal of the Transactions of the Korean Institute of Electrical Engineers, vol. 67, no. 4, pp. 543-548, Apr. 2018. - C. S. Kang and J. J. Yee, "A study on the 4-Dimentional temperature monitoring by thermal line sensor method in a large scale station building," Journal of the Regional Association of Architectural Institute of Korea, vol. 12, no. 3, pp. 245-252, Sep. 2010.
- D. H. Han and L. H. Kang, "Piezoelectric characteristics of PNN-PZT/Epoxy paint sensor according to the poling conditions," Journal of Sensors and Actuators A : Physical, vol. 269, no. 1 pp. 419-426, Jan. 2018. https://doi.org/10.1016/j.sna.2017.12.005
- B. Yoo, A. S. Purekar, Y. Zhang and D. J. Pines, "Piezoelectric-paint-based two-dimensional phased sensor arrays for structural health monitoring of thin panels," Journal of Smart Materials and Structures, vol. 19, no. 7, July 2010.
- I. H. Seo, I. Y. Hwang, K. M. Park and K. D. Cho, "Thermal vacuum test of high performance on-board computer for LEO," Proc. of KSAS Fall Conference 2014, Korea, pp. 1475-1478, Nov. 2014.
- J. H. Ahn, Y. C. Lee, D. S. Choi and C. Y. Lee, "Effect of conductive particles on electrical conductivity using EHD ink jet printing technology," Journal of Aerospace System Engineering, vol. 12, no. 6, pp. 1-8, Dec. 2018. https://doi.org/10.20910/JASE.2018.12.6.1
-
H. W. Yoon, J. Y. Park, Y. Y. Kang, N. K. Park, J. C. Won and Y. H. Kim, "Preparation and characterization of
$BaTiO_3$ /Polyimide composite nanofibers and nanocomposites via electrospinning with enhanced dielectric properties," Journal of Polymer, vol. 41, no. 6, pp. 978-983, Nov. 2017.